Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Diameter 4 [mm]: 15
-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Inner Diameter [mm]: 19
-
Lisainfo: Grommet for stabilizer,
front, ®19 mm -
Additional information: Grommet for stabilizer,
front, ®19 mm
- Stabiliser Bar Diameter [mm]: 18
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 18
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik BMW T. 3 (E36) (09/90-08/00), 3 (E46) (02/98-12/07), 5 (E34) (12/87-01/97), Z4 (E85) (02/03-/), Z4 (E86) (03/06-/)
- Stabiliser Bar Diameter [mm]: 18
- Length [mm]: 40
- Inner Diameter [mm]: 18
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.028
-
Name: Paigutus -
Kndmik BMW T. E36/ 46 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 18
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle,
both sides, Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 34
- Inner Diameter [mm]: 18
- Manufacturer: GATES
- Suspension: for vehicles without sports suspension
- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- Diameter [mm]: 17
-
Name: Paigutus -
Kndmik BMW T. E36/ 46 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 15
- Outer Diameter [mm]: 31
- Length [mm]: 41
- paired article number: 270907
- Weight [kg]: 0.04
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Stabiliser Bar Diameter [mm]: 24
- Length [mm]: 55
- Width [mm]: 60
- Thickness [mm]: 57
- Inner Diameter [mm]: 24
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Paigutus -
Kndmik BMW P. E46/ E85 - Manufacturer: MAX
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Production date to: 04/
09 -
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 22.5
- Length [mm]: 57
- Width [mm]: 60
- Height [mm]: 56
- for OE number: 31351094556
- Manufacturer: SASIC
- Additional information: 2306212
- Lisainfo: 2306212
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 26.5
- Inner Diameter [mm]: 25
- Length [mm]: 60
- Width [mm]: 70
- Height [mm]: 70
- for OE number: 31356765574
- Manufacturer: SASIC
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 23.8
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Siseläbimõõt [mm]: 24
- vajaminev tükihulk: 2
- Installatsiooni pool: Esisild
- Pikkus (mm): 55
-
Kaal (kg): 0,
154 - Laagritüüp: Kummipuks
- Name: TG 00081994
- Manufacturer: TEDGUM
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 17
- Outer Diameter [mm]: 30
- Length [mm]: 40
- paired article number: 271049
- Weight [kg]: 0.04
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: GSP ZAWIESZENIE
- Stabiliser Bar Diameter [mm]: 19
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 19
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik BMW T. 3 (E46) (02/98-12/07), Z3 (E36/7, E36/8) (10/95-06/03), Z4 (E85) (02/03-/), Z4 (E86) (03/06-/), Z4 (E89)
- Stabiliser Bar Diameter [mm]: 19
- Length [mm]: 40.5
- Width [mm]: 31
- Thickness [mm]: 34
- Inner Diameter [mm]: 18
- Fitting Position: Rear Axle
- Weight [kg]: 0.026
- Manufacturer: FEBI BILSTEIN
- Additional information: F44277
- Lisainfo: F44277
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter 4 [mm]: 24
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [g]: 154
- Thickness [mm]: 57
- Inner Diameter [mm]: 24
- Length [mm]: 55
- Width [mm]: 60
- Name: IM 35948
- Manufacturer: ORIGINAL IMPERIUM
- Additional information: IM 35948
- Lisainfo: IM 35948
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: both sides,
Front - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 103
- Inner Diameter [mm]: 24
- Manufacturer: GATES
- Stabiliser Bar Diameter [mm]: 24.2
- Length [mm]: 55
- Width [mm]: 60
- Thickness [mm]: 57
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.141
-
Name: Paigutus -
Kndmik BMW P. E46/ E85 24MM LE/ PR - Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 24
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 24
- Required quantity: 2
-
Name: Paigutus -
Kndmik BMW P. E46/ E85 24MM L/ P - Manufacturer: MEY
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [g]: 151
- Thickness [mm]: 57
- Inner Diameter [mm]: 26
- Length [mm]: 55
- Width [mm]: 60
- Name: IM 35492
- Manufacturer: ORIGINAL IMPERIUM
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Stabiliser Bar Diameter [mm]: 24.2
- Length [mm]: 55
- Width [mm]: 60
- Thickness [mm]: 57
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.141
- Name: SW 20 93 3377
- Manufacturer: SWAG
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter 4 [mm]: 23.5
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 23
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 34
- Length [mm]: 40
- Required quantity: 1
- Mounting Type: Rubber Mount
- Name: ALT 86343PAAL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front,
inner, Left, Right - Suspension: for vehicles with sports suspension
- Stabiliser Bar Diameter [mm]: 24
- Quantity per packing unit: 2
- Manufacturer: DELPHI
- Name: DE TD1775W
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Piirangutega toode/piirangu info 2: koos rasvakattega
- Siseläbimõõt [mm]: 17
-
Kaal (kg): 0,
03 -
Materjal: PU
(Polyurethan) - Pikkus (mm): 40
- Värv: punane
-
Installatsiooni pool: Tagasild,
sees - Shore-A tugevuskarakteristik, lähteühend: 80
- vajaminev tükihulk: 2
- Name: TG 00087504
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle,
inner - Supplementary Article/Info 2: with grease cap
- Length [mm]: 55
- Inner Diameter [mm]: 24
- Shore-A hardness value, base body: 80
- Required quantity: 2
-
Material: PU
(Polyurethane) - Colour: red
- Weight [kg]: 0.12
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks