• Fitting Position: Intake Side
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Height [mm]: 34.7
• Outer Diameter [mm]: 12
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 34.63
• Outer Diameter [mm]: 12
• Operating Mode: Hydraulic
• Fitting Position: Exhaust Side
• Weight [kg]: 0.02
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N52 B25 A
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Diameter [mm]: 12
• Height [mm]: 34.7
• Fitting Position: Exhaust Side, Intake Side
• Name: KLAPITAPP
• Manufacturer: FRE
• Lisainfo: PI 06-0019
• Additional information: PI 06-0019

• Engine Code: N52 B25 A
• Fitting Position: Exhaust Side, Intake Side
• Height [mm]: 31.6
• Height 1 [mm]: 25
• Height 2 [mm]: 34.5
• Diameter [mm]: 12
• Quantity: 1
• Operating Mode: Hydraulic
• Ball Diameter [mm]: 8.4
• Name: KLAPITAPP
• Manufacturer: FAI

• Fitting Position: Exhaust Side
• Required quantity: 12
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Height [mm]: 35
• Diameter [mm]: 12
• SVHC: No SVHC present!
• Name: KLAPITAPP
• Manufacturer: INA

• Fitting Position: Exhaust Side
• Engine Code: N52 B25 A
• Required quantity: 12
• Name: Nookur, mootorijuhtimine
• Manufacturer: MVE

• Engine Code: N52 B25 A
• Quantity per packing unit: 8
• Fitting Position: Exhaust Side, Intake Side
• Height [mm]: 31.6
• Height 1 [mm]: 34.5
• Diameter [mm]: 12
• Quantity: 8
• Operating Mode: Hydraulic
• Ball Diameter [mm]: 8.4
• Manufacturer: FAI

• Engine Code: N52 B25 A
• Quantity per packing unit: 8
• Fitting Position: Exhaust Side, Intake Side
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: FRE
• Lisainfo: RA06-950
• Additional information: RA06-950

• Fitting Position: Intake Side
• Required quantity: 12
• Quantity per packing unit: 8
• Operating Mode: Hydraulic
• Height [mm]: 33
• Diameter [mm]: 12
• SVHC: No SVHC present!
• Name: KLAPITAPP
• Manufacturer: INA

• Engine Code: N52 B25 A
• Manufacturer: FEDERAL MOGUL

• Engine Code: N52 B25 A
• Operating Mode: Hydraulic
• Outer Diameter [mm]: 12
• Length [mm]: 34.5
• Fitting Position: Exhaust Side, Intake Side
• Name: Klapitapp
• Manufacturer: KS
• Quantity per packing unit: 8

• Valve Type: for inlet valves
• Parameter: 1
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve Type: for inlet valves
• Parameter: 5
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve Type: for inlet valves
• Parameter: 2
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve Type: for inlet valves
• Parameter: 4
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Required quantity: 12
• Valve Type: for exhaust valves
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve Type: for inlet valves
• Parameter: 3
• Observe service information:
• SVHC: No SVHC present!
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: INA

• Valve Type: for inlet valves
• Thickness [mm]: 33.4
• Outer Diameter [mm]: 12
• Operating Mode: Hydraulic
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.016
• for OE number: 11 33 7 548 690
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N52 B25 A
• Name: NOOKUR,MOOTORIJUHTIMINE
• Manufacturer: KS
• Quantity per packing unit: 4

• Fitting Position: Exhaust Side
• Weight [kg]: 0.037
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Side
• Weight [kg]: 0.037
• Name: SW 20 93 1268
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Fabrication Number: EFR-BM-001
• Manufacturer: NTY

• Fabrication Number: EFR-BM-008
• Manufacturer: NTY
• Name: NTY EFR-BM-008

• Engine Code: N52 B25 A
• Valve Type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: MAX

• Number of connectors: 2
• Manufacturer: MAX

Name: ZAWàR ZMIENNYCH FAZ ROZRZ¤DU BMW 5 2.0/2.2/2.5/2.8/3.0 96-

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Fitting Position: Intake Side, Exhaust Side
• Connector Shape: rectangular
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 11 36 7 516 293
• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Manufacturer: KAMOKA

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.19
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 39SKV012

• Valve Type: Control Valve
• Operating Mode: Electric-hydraulic
• Voltage [V]: 12
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 2
• Article number of recommended accessories: TC0940K
• Manufacturer: BGA

• Required quantity: 2
• Fitting Position: Cylinder Head
• Number of pins: 2
• Pin Shape: Flat
• Plug Type: Male
• Material: Metal
• Length [mm]: 119
• Width [mm]: 32
• Height [mm]: 32
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: GAT

• Version: 91542
• for OE number: 11367516293
• Manufacturer: MEAT&DORIA

• Engine Code: N52 B25 A
• Manufacturer: MAGNETI MARELLI

• for OE number: 11 36 7 585 425
• Manufacturer: TRUCKTEC

• Guarantee: 3 years guarantee
• for OE number: 11 36 7 585 425
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: N52 B25 A
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: FAI

• Engine Code: N52 B25 A
• Manufacturer: MAGNETI MARELLI

• Length [mm]: 118
• Number of connectors: 2
• Supplementary Article/Supplementary Info: with seal rings
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.17
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Väljalaskepool, Sisselaskepool
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6NW358188011

• Length [mm]: 118
• Number of connectors: 2
• Supplementary Article/Supplementary Info: with seal rings
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.17
• Name: SW 20 10 3360
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ERZ-BM-001
• Manufacturer: NTY
• Name: NTY ERZ-BM-001

• Operating Mode: Electric-hydraulic
• Valve Type: for inlet valves, for exhaust valves
• Number of pins: 2
• Manufacturer: HEPU

• Fitting Position: Exhaust Side
• Operating Mode: Hydraulic
• Fabrication Number: RKZ-BM-000
• Number of Teeth: 38
• Manufacturer: NTY
• Name: NTY RKZ-BM-000

• Number of connectors: 2
• Weight [kg]: 0.247
• Name: SW 33 10 2829
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 1.21
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 96SKV089
• Manufacturer: ESEN SKV

• Operating Mode: Electric
• Number of pins: 2
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: DRM 01981
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Number of Teeth: 38
• Operating Mode: Hydraulic
• Fitting Position: Intake Side
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Valve Type: Solenoid Valve
• Operating Mode: electromagnetic
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: VDO

• Engine Code: N52 B25 A
• Valve Type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: PIE

• Operating Mode: Hydraulic
• Fitting Position: Intake Side
• Number of Teeth: 38
• Engine Timing: Timing Chain
• paired article number: 503 867
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Valve Type: Control Valve
• Operating Mode: Electric-hydraulic
• Voltage [V]: 12
• Version: Neue Version
• Manufacturer: METZGER

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Manufacturer: DR MOTOR
• Name: DRM 01503

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Manufacturer: JPN

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Assy./disassy. by qualified personnel required!:
• Supplementary Article/Info 2: Requires special tools for mounting
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Intake Side
• Number of Teeth: 38
• Assy./disassy. by qualified personnel required!:
• Supplementary Article/Info 2: Requires special tools for mounting
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: N52 B25 A
• Number of Teeth: 38
• Fitting Position: Intake Side
• Name: KOO WAKA ROZRZ¤DU BMW 1 E81 3.0 06-
• Manufacturer: KS

• for OE number: 11 37 7 548 388
• Guarantee: 3 years guarantee
• Length [mm]: 160
• Width [mm]: 115
• Weight [g]: 1,270
• Manufacturer: AT AUTOTEILE

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Intake Side
• Number of Teeth: 38
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• paired article number: 178385
• Number of Teeth: 38
• Fitting Position: Intake Side
• Weight [kg]: 0.496
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 178386
• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Weight [kg]: 0.563
• Observe service information:
• Name: Nukkvolliseadistaja
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Intake Side
• Engine Code: N52 B25 A
• Hammastehulk: 38
• Name: Nukkvolliseadistaja
• Manufacturer: MVE

• Fitting Position: Intake Side
• Number of Teeth: 38
• Manufacturer: JPN

• Installatsiooni pool: Sisselaskepool
• Kruvide arv: 1
• Hammastehulk: 38
• Manufacturer: SKF NAPINACZE POMPY

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• paired article number: at22232
• Guarantee: 3 years guarantee
• for OE number: 11 36 7 522 290
• Operating Mode: Hydraulic
• Version: OEM - Quality - Line
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Number of Teeth: 38
• Fitting Position: Intake Side
• paired article number: at22233
• Guarantee: 3 years guarantee
• for OE number: 11 31 7 545 959
• Operating Mode: Hydraulic
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Installatsiooni pool: Väljalaskepool
• Kruvide arv: 1
• Hammastehulk: 38
• Manufacturer: SKF NAPINACZE POMPY

• Engine Code: N52 B25 A
• Supplementary Article/Supplementary Info: without gasket/seal
• Article number of recommended accessories: VDO A2C59516958, BMW11 12 7 552 280
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Manufacturer: VDO

Name: Seadeelement, ekstsentrikvoll (varieeruv klapisurve)

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• for OE number: 11367522290
• Manufacturer: HEPU

• Number of Teeth: 38
• Fitting Position: Intake Side
• for OE number: 11317545959
• Manufacturer: HEPU