Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 65
- Height [mm]: 10
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist - Fitting Position: Rear Axle
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle Middle
- Inner Diameter [mm]: 46
-
Thickness [mm]: 13,
9 - Outer Diameter [mm]: 65
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with mounting sleeve
- Height 1 [mm]: 10
- Height 2 [mm]: 15.5
- Outer Diameter 1 [mm]: 78.1
- Inner Diameter 1 [mm]: 44
-
Material: ACM
(Polyacrylate) - Swirl Type: Alternating Twist
- Dust Cover: with dust lip
- Version: Seal only
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
-
Thickness [mm]: 9,
13 - Inner Diameter [mm]: 45
- Outer Diameter [mm]: 65
-
Material: ACM
(Polyacrylate) - Fitting Position: Rear Axle
- Weight [kg]: 0.028
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: FEB
- Additional information: FE12619
- Lisainfo: FE12619
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date to: 200807
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 43.4
- Outer Diameter [mm]: 65.2
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Height 1 [mm]: 10
- Height 2 [mm]: 14
- Outer Diameter 1 [mm]: 65
- Inner Diameter 1 [mm]: 45
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
-
Fitting Position: Rear Axle,
both sides - Quantity: 2
-
Material: ACM
(Polyacrylate) - Inner Diameter [mm]: 44
- Outer Diameter [mm]: 90
- Height [mm]: 10
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: REI
-
Fitting Position: Rear Axle,
Drive Axle - Height 1 [mm]: 10
- Height 2 [mm]: 14
- Outer Diameter 1 [mm]: 75
- Inner Diameter 1 [mm]: 45
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
- Construction Year to: 09.2006
- Thickness [mm]: 60
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 68
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear - Mounting Type: Hydro Mount
- Weight [kg]: 0.491
-
Name: KINNITUS,
DIFERENTSIAAL - Manufacturer: FEB
- Additional information: FE29367
- Lisainfo: FE29367
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 09.2006
- Thickness [mm]: 60
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 68
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear - Mounting Type: Hydro Mount
- Weight [kg]: 0.491
- Name: SW 20 92 9367
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Shore-A hardness value, base body: 80
-
Material: PU
(Polyurethane) - Weight [kg]: 0.23
- Outer Diameter [mm]: 46.8
- Supplementary Article/Info 2: with grease cap
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 12.5
- Required quantity: 2
- Colour: red
-
Name: Kinnitus,
diferentsiaal - Manufacturer: TED
- Inner Diameter 2 [mm]: 18
- Required quantity: 1
- Inner Diameter 1 [mm]: 14
-
Fitting Position: Rear Axle Left,
Rear - Outer Diameter [mm]: 68
- Weight [kg]: 0.455
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: TEDGUM
- Name: TG 00082043
-
Fitting Position: Rear Axle Left,
Lower, outer - Manufacturer: GSP
- Production date to: 200808
- Fitting Position: Rear
- Manufacturer: FEBEST
- Colour: red
- Required quantity: 1
-
Fitting Position: Rear,
Rear Axle Left - Length 2 [mm]: 57
- Length 1 [mm]: 60
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 68.5
- Weight [kg]: 0.51
- Shore-A hardness value, base body: 80
-
Material: PU
(Polyurethane) -
Name: TULEJA MOSTU BMW T. 1
(E81) POLIURETAN - Manufacturer: TED
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks