• Number of pins: 2
• Socket colour: black
• Connector Shape: rectangular
• Thread Size: M 14x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 12621710535
• Manufacturer: MEAT&DORIA

• Vehicle type: E66, E67
• Required quantity: 1
• Wheelbase: long wheelbase
• Manufacturer Restriction: für Heizkörper, für Verdampfer
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV695
• Manufacturer: ESEN SKV

• Engine Code: N73 B60 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: N73 B60 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Engine Code: N73 B60 A
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: N73 B60 A
• Manufacturer: FACET

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Mounting Type: Plugged
• Voltage [V]: 12
• Number of pins: 2
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309541
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N73 B60 A
• Thread Size: M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Number of pins: 3
• Fabrication Number: ECM-BM-005
• Manufacturer: NTY

Lisainfo: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10 Additional information: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV183
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA BMW 5 F10
• Manufacturer: BRM

• Fitting Position: for cylinder 7-12
• Supplementary Article/Supplementary Info: with cable pull
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 7 E65 760LI 03-
• Manufacturer: BRM

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 3
• Pressure from [kPA]: 22
• Name: DE PS20095-12B1
• Manufacturer: DELPHI

• Construction Year to: 09.2006
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Block Separation:
• Fitting Position: after catalytic converter, for cylinder 7-12
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Construction Year from: 10.2006
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Block Separation:
• Fitting Position: after catalytic converter, for cylinder 7-12
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Required quantity: 2
• Rated Voltage [V]: 12
• Connector Shape: D Shape
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N73 B60 A
• Construction Year to: 09.2003
• Fitting Position: Left, after catalytic converter
• Oxygen Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.105
• Name: SW 33 10 4073
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N73 B60 A
• Construction Year from: 09.2006
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 330
• Weight [kg]: 0.08
• Name: SW 33 10 3197
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor
• Fabrication Number: ESL-BM-025
• Number of circuits: 5
• Manufacturer: NTY

• Fitting Position: Right Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor, Heated
• Cable Length [mm]: 305
• Name: DE ES20504-12B1
• Manufacturer: DELPHI

• Required quantity: 2
• Number of pins: 3
• for OE number: 13628657300
• Manufacturer: MEAT & DORIA

• Construction Year to: 09.2006
• Oxygen Sensor: Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-6, for cylinder 7-12

• Construction Year from: 09.2006
• Transmission Type: Automatic Transmission
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 10.2006
• Oxygen Sensor: Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-6, for cylinder 7-12

• Vehicle Equipment: for vehicles with automatic transmission
• Fitting Position: for cylinder 1-6
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 450
• Quality: OE EQUIVALENT
• for OE number: 368256
• Name: Lambda andur
• Manufacturer: MD

• Construction Year from: 10.2006
• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor
• Fitting Position: before catalytic converter, for cylinder 1-6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 5
• Overall Length [mm]: 720
• Name: Lambda andur
• Manufacturer: MAX
• Lisainfo: 59-0090
• Additional information: 59-0090

• Number of pins: 3
• Manufacturer: METZGER

• Oxygen Sensor: Switching-type Oxygen Sensor
• Length [mm]: 720
• Fabrication Number: ESL-BM-017
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Cable Length [mm]: 665
• Name: DE ES20673-12B1
• Manufacturer: DELPHI

Fitting Position: Right Front, for cylinder 1, for cylinder 2, for cylinder 3, for cylinder 4, for cylinder 5, for cylinder 3-4, before catalytic converter

• Construction Year from: 10.2006
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Number of pins: 5
• Cable Length [mm]: 570
• Quality: OE EQUIVALENT
• for OE number: 1618HG
• Name: SONDA LAMBDA BMW 1 05-
• Manufacturer: MD

• Construction Year from: 02.2003
• Construction Year to: 09.2006
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 950
• Number of connectors: 5
• Manufacturer: VERNET

Fitting Position: to cylinder 5, to cylinder 6, to cylinder 7, to cylinder 8, to cylinder 9, to cylinder 10, to cylinder 11, to cylinder 12, to cylinder 1, to cylinder 2, to cylinder 3, to cylinder 4

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 420
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV870
• Manufacturer: ESEN SKV

• Construction Year to: 09.2006
• Engine Code: N73 B60 A
• Number of pins: 5
• Connector Shape: D Shape
• Cable Length [mm]: 1,360
• Fitting Position: Exhaust Manifold
• Oxygen Sensor: Broadband Oxygen Sensor
• Quality: OE EQUIVALENT
• for OE number: 022906262H
• Manufacturer: MEAT&DORIA

• Construction Year to: 09.2006
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-6
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Block Separation:
• Construction Year to: 09.2006
• Engine Code: N73B60
• Cable Length [mm]: 950
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Fitting Position: Right Front, before catalytic converter, Left Front Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated

• Construction Year to: 09.2006
• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 1,510
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.22
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV852

• Construction Year from: 10.2006
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-6
• Number of circuits: 4
• Overall Length [mm]: 325
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Fitting Position: Left, before catalytic converter
• Construction Year from: 06.2006
• Oxygen Sensor: Broadband Oxygen Sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 720
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: N73 B60 A
• Required quantity: 1
• Colour: black
• Length [mm]: 680
• Cable Length [mm]: 720
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.477
• Manufacturer: EPS

Fitting Position: for cylinder 1-6, Right Front, before catalytic converter Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 520
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV868

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Construction Year to: 09.2006
• Voltage [V]: 12
• Length [mm]: 630
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV858

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Construction Year from: 09.2003
• Construction Year to: 08.2006
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 1,070
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.2
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV851

• Construction Year to: 09.2006
• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 1,470
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.22
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV860
• Manufacturer: ESEN SKV

• Construction Year to: 09.2006
• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Number of pins: 5
• Cable Length [mm]: 600
• Quality: OE EQUIVALENT
• for OE number: 06A906262AE
• Manufacturer: MEAT & DORIA

• Oxygen Sensor: Regulating Sensor
• Construction Year to: 09.2006
• Fitting Position: before catalytic converter
• Cable Length [mm]: 625
• Number of pins: 6
• Manufacturer: ERA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Engine Code: N73 B60 A
• Required quantity: 1
• Colour: grey
• Length [mm]: 620
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.475
• Manufacturer: EPS

Fitting Position: for cylinder 7-12, Left Front, before catalytic converter Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Number of pins: 9
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor
• Required quantity: 1
• Engine Code: N73B60A, N73B60B
• Cable Length [mm]: 600
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Fitting Position: Left Front, for cylinder 7-12, before catalytic converter Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N73 B60 B, N73 B60 A
• Fitting Position: Right
• Oxygen Sensor: Diagnostic Probe, Heated
• Block Separation:
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 425
• Manufacturer: PIERBURG

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 09.2006
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, for cylinder 7-12
• Number of circuits: 5
• Overall Length [mm]: 620
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year from: 10.2006
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, for cylinder 7-12
• Number of circuits: 5
• Overall Length [mm]: 620
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N73 B60 A, N73 B60 B
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 600
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Construction Year from: 10.2006
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, for cylinder 1-6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 5
• Overall Length [mm]: 720
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 03.2005
• Fitting Position: Left, Right
• Oxygen Sensor: Regulating Sensor, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 900
• Manufacturer: PIERBURG

• Oxygen Sensor: Unheated
• Number of pins: 5
• Cable Length [mm]: 600
• for OE number: 1K0998262H
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 300
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO

Oxygen Sensor: Diagnostic Probe, Planar Sensor, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 09.2006
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, for cylinder 1-6
• Block Separation:
• Number of circuits: 5
• Overall Length [mm]: 720
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Engine Code: N73 B60 A
• Oxygen Sensor: Regulating Sensor, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 700
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE