Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)

-
Fitting Position: Front Axle Left,
Front Axle Right - Diameter [mm]: 23
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW 5 E34
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
BMW 5 E34
(kvaliteediklass: PJ)"



-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 15
-
Lisainfo: Grommet for stabilizer,
rear, ®15 mm -
Additional information: Grommet for stabilizer,
rear, ®15 mm
Suspension: for vehicles without M technology, for vehicles without lowered suspension



-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Inner Diameter [mm]: 19
-
Lisainfo: Grommet for stabilizer,
front, ®19 mm -
Additional information: Grommet for stabilizer,
front, ®19 mm


-
Fitting Position: inner,
Rear Axle Right, Rear Axle Left - Inner Diameter [mm]: 15
- Required quantity: 2
-
Name: Paigutus -
Kndmik BMW T. E32/ 34/ 3 - Manufacturer: MEY
- Lisainfo: 3003355107
- Additional information: 3003355107
Suspension: for vehicles without M technology, for vehicles without lowered suspension


- Stabiliser Bar Diameter [mm]: 18
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 18
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik BMW T. 3 (E36) (09/90-08/00), 3 (E46) (02/98-12/07), 5 (E34) (12/87-01/97), Z4 (E85) (02/03-/), Z4 (E86) (03/06-/)


- Stabiliser Bar Diameter [mm]: 18
- Length [mm]: 40
- Inner Diameter [mm]: 18
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.028
-
Name: Paigutus -
Kndmik BMW T. E36/ 46 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


























-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 31
- Inner Diameter [mm]: 14
- Manufacturer: GATES


- Length [mm]: 40
- Width [mm]: 31
- Thickness [mm]: 32
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 34
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.03
-
Name: Paigutus -
Kndmik BMW T. E32/ 34/ 36 - Manufacturer: FEB
Suspension: for vehicles without lowered suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Length [mm]: 40
- Width [mm]: 31
- Thickness [mm]: 32
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 34
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.03
- Name: SW 20 79 0037
- Manufacturer: SWAG
Suspension: for vehicles without lowered suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 15
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819009410


- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 51
- Width [mm]: 60
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819000210


- Suspension: for vehicles with standard suspension
- Length [mm]: 60
- Width [mm]: 53
- Thickness [mm]: 50
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 51
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.11
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




























































- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 5
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.














- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 15
- paired article number: VKDS 458506
- Name: SK VKDS458506
- Manufacturer: SKF


- Suspension: for vehicles with standard suspension
- Length [mm]: 60
- Width [mm]: 53
- Thickness [mm]: 50
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 51
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.11
-
Name: Paigutus -
Kndmik BMW P. E34 WEW. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






































- Fitting Position: Front Axle both sides
- Required quantity: 2
- Stabiliser Bar Diameter [mm]: 23
- paired article number: VKDS 358044
- Length [mm]: 60
- Height [mm]: 54.2
- Inner Diameter [mm]: 23
- Manufacturer: SKF
- Name: SK VKDS358044


-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 15
- Outer Diameter [mm]: 31
- Length [mm]: 41
- paired article number: 270907
- Weight [kg]: 0.04
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS


- Suspension: for vehicles with sports suspension
- Length [mm]: 60
- Width [mm]: 52
- Thickness [mm]: 54
- Inner Diameter [mm]: 24
- Outer Diameter [mm]: 51
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.11
-
Name: Paigutus -
Kndmik BMW P. E34 WEW. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Laagritüüp: Kummipuks
- Installatsiooni pool: Esisild
- Pikkus (mm): 60
- vajaminev tükihulk: 2
-
Kaal (kg): 0,
13 - Siseläbimõõt [mm]: 21
- Manufacturer: TEDGUM


-
Fitting Position: Front,
outer, Left, Right - Quantity per packing unit: 2
- Manufacturer: DELPHI
- Name: DE TD1213W


- Fitting Position: Rear Axle
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 34
- Length [mm]: 40
- Required quantity: 1
- Mounting Type: Rubber Mount
- Name: ALT 86343PAAL
- Manufacturer: ALTE AUTOMOTIVE


- Piirangutega toode/piirangu info 2: koos rasvakattega
- Siseläbimõõt [mm]: 14
-
Kaal (kg): 0,
034 -
Installatsiooni pool: sees,
Tagasild - Pikkus (mm): 40
- Värv: punane
- Shore-A tugevuskarakteristik, lähteühend: 80
- vajaminev tükihulk: 2
-
Materjal: PU
(Polyurethan) - Manufacturer: TED
Name: Paigutus - Kndmik BMW T. E32/34/36 Q:14MM WEW !!!POLIURETAN!!!


- Shore-A tugevuskarakteristik, lähteühend: 80
-
Installatsiooni pool: sees,
Esisild - Piirangutega toode/piirangu info 2: koos rasvakattega
- vajaminev tükihulk: 2
- Pikkus (mm): 60
-
Siseläbimõõt [mm]: 20,
5 -
Materjal: PU
(Polyurethan) - Värv: punane
-
Kaal (kg): 0,
121 - Manufacturer: TEDGUM
- Name: TG 00087469