Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Suspension: for vehicles with standard suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 33 52 1 132 270
- Fitting Position: Rear Axle both sides
- Manufacturer: TRUCKTEC
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
-
Name: Laager -
Kndmik. BMW T. E34 - Manufacturer: MAX
- Supplementary Article/Info 2: without rolling bearing
- Fitting Position: Rear Axle
- Manufacturer: VAICO
Suspension: for vehicles with standard suspension, for vehicles with M technology General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.463
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
-
Name: Laager -
Kndmik. BMW T. E34 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- SVHC: No SVHC present!
-
Manufacturer: FAG-
ELEMENTY ZAWIESZENIA
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- reinforced version:
- Quantity Unit: Piece
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. BMW T. E34 - Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
-
Fitting Position: Right,
Left, Rear Axle - Number of Parts [parts]: 1
- Outer Diameter 1 [mm]: 109
- Width 1 [mm]: 56
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB950.05
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: with bearing
- Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut,
with bearing, front -
Additional information: Bearing for strut,
with bearing, front
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
-
Name: Laager -
Kndmik. BMW P. E30/ 34 - Manufacturer: MAX
- Suspension: for vehicles without M technology
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Rear Axle
-
Technical Information: Suspension mounting only
(no bearing) - Manufacturer: KYB
Name: Laager - Kndmik. BMW T. 5 (E34) 1.8-4.0 01.88-01.97 LE/PR
-
Fitting Position: Rear Axle,
Rear Axle both sides - Supplementary Article/Info 2: without bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW E34
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
BMW E34
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 50
- Manufacturer: GSP AUTOMOTIVE
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
-
for OE number: 1 132 270,
33 52 1 132 270 - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
-
for OE number: 1 132 270,
33 52 1 132 270 - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
- Name: LMI 3109201
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: CORTECO
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without M technology
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
-
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Supplementary Article/Info 2: with rolling bearing
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: POLCAR
BMW E30/E34
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle both sides
- Supplementary Article/Supplementary Info: with integrated ball bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
for OE number: 1 124 508, 1 139 452, 31 33 1 124 508, 31 33 1 139 452
Lisainfo: "Tootja: SRL
BMW E30/E34
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
BMW E30/E34
(kvaliteediklass: PJ)"
- Suspension: for vehicles without sports suspension
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Supplementary Article/Supplementary Info: with integrated ball bearing
- Manufacturer: SACHS
for OE number: 1 124 508, 1 139 452, 31 33 1 124 508, 31 33 1 139 452 SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles without sports suspension
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Supplementary Article/Supplementary Info: with integrated ball bearing
- Manufacturer: LEMFORDER
for OE number: 1 124 508, 1 139 452, 31 33 1 124 508, 31 33 1 139 452 SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Supplementary Article/Info 2: with rolling bearing
- SVHC: No SVHC present!
-
Manufacturer: FAG-
ELEMENTY ZAWIESZENIA
- Required quantity: 2
- Engine Code: M 40B18C
- Fitting Position: Rear Axle
- Manufacturer: AIC
Suspension: for vehicles with standard suspension, for vehicles with M technology General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Vehicle Equipment: for vehicles with level control
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- reinforced version:
- Quantity Unit: Piece
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. BMW T. E34/ 32 - Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
-
Fitting Position: Right,
Left, Front Axle -
Supplementary Article/Info 2: with rolling bearing,
with rubber mount - Number of Parts [parts]: 7
-
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB650.00
- for OE number: 31 33 1 139 452
- Fitting Position: Front Axle both sides
- Manufacturer: TRUCKTEC
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Front Axle
- Manufacturer: KYB
- Name: KY SM1000
Suspension: for vehicles without M technology, for vehicles without sports suspension Technical Information: Suspension mounting w/ integrated suspension bearing / / / Fastenings : suspension mounting nut (x3), suspension mounting washer (x3)
- Construction Year from: 10.1993
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Name: LU 713001320
- Manufacturer: FAG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks