Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Height [mm]: 91
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E28/30/32
- Fitting Position: Front Axle both sides
- Name: Shock absorber's cover left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
DAEWOO NEXIA (KLETN)
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
DAEWOO NEXIA (KLETN)
(kvaliteediklass: PJ)"
- Thickness [mm]: 91
- Material: Plastic
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.02
-
Name: Kaitsemts/
kaitsekumm, amort - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with bad road version
-
Fitting Position: Front Axle Left,
Front Axle Right - Material: Thermoplast
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Height [mm]: 195
- Required quantity: 2
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E30/36/E3
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Front Axle - Height [mm]: 200
- Material: Thermoplast
- Weight [g]: 77
- Diameter 1 [mm]: 60
- Diameter 2 [mm]: 60
- Name: IM 35220
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Front Axle Left,
Front Axle Right - Block Separation:
- Thickness [mm]: 200
- Material: Plastic
- Inner Diameter 1 [mm]: 60
- Weight [kg]: 0.06
- Inner Diameter 2 [mm]: 60
- Manufacturer: FEBI BILSTEIN
Suspension: for vehicles with sports suspension, for vehicles with bad road version General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA AMORTYZATORY
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
-
Shock Absorber Design: Spring-
bearing Damper -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: MAX
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Design: Spring-
bearing Damper -
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Manufacturer: GSP AMORTYZATOR
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: GSP AMORTYZATOR
- Suspension: for vehicles without M technology
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694707 -
Shock Absorber Design: Spring-
bearing Damper -
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
- Spring Type: for vehicles without air suspension
- Quantity per packing unit: 2
- Quantity per axle: 1
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Observe technical data:
- Shock Absorber Mounting Type: Top pin
- Manufacturer: TRW
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
361501, GH- 691501 - Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: AUTO-
GH
Suspension: for vehicles without M technology, for vehicles without sports suspension
- Spring Type: for vehicles without air suspension
- Quantity per packing unit: 2
- Quantity per axle: 1
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Observe technical data:
- Shock Absorber Mounting Type: Top pin
- Manufacturer: TRW
Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Piston Rod Diameter [mm]: 25
- Suspension Strut Outer Diameter [mm]: 49
- Manufacturer: OPTIMAL ZAWIESZENIE
- Suspension: for vehicles without electronic suspension control
- Spring Type: for vehicles without air suspension
- Quantity per packing unit: 2
- Quantity per axle: 1
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Design: Spring-
bearing Damper -
Shock Absorber System: Twin-
Tube - Observe technical data:
- Shock Absorber Mounting Type: Top pin
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without M technology
- Braking/Driving Dynamics: for vehicles without EDC
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
-
Piston Rod Thread: M 14 X 1,
5 - Shock Absorber Mounting Type: Top pin
- for OE number: 31321138667
-
Manufacturer: ASHIKA-
AMORTYZATORY
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without M technology
- Braking/Driving Dynamics: for vehicles without EDC
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
-
Piston Rod Thread: M 14 X 1,
5 - Shock Absorber Mounting Type: Top pin
- for OE number: 31321138667
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 314 640 0001,
300 313 3108 - Replace in pairs only:
- Name: AMORT
- Manufacturer: MEY
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 314 640 0001,
300 313 3108 - Replace in pairs only:
- Name: AMORT
- Manufacturer: MEY
- Lisainfo: 3266240006
- Additional information: 3266240006
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
691900 - Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: AUTO-
GH
Suspension: for vehicles without M technology, for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Design: Spring-
bearing Damper -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Article number of recommended accessories: 314 740 0001
- Replace in pairs only:
- Name: AMORT
- Manufacturer: MEY
Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without M technology
- Braking/Driving Dynamics: for vehicles without EDC
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
-
Piston Rod Thread: M 14 X 1,
5 - Shock Absorber Mounting Type: Top pin
- for OE number: 31321138667
- Name: AMORT
- Manufacturer: JPA
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: KAYABA AMORTYZATORY
- Name: KY 365505
Suspension: for vehicles without M technology, for vehicles without sports suspension
- Braking/Driving Dynamics: for vehicles without EDC
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: KYB
- Lisainfo: KYB366007
- Additional information: KYB366007
Suspension: for vehicles without M technology, for vehicles with sports suspension Technical Information: Please refer to the technical drawing in "Documents"
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Design: Spring-
bearing Damper -
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
Lisainfo: "Tootja: BILSTEIN
BMW 5 E34, 88-95
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Telescopic Shock Absorber
- Parameter: SEXOV32X197A
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Length 1 [mm]: 460
- Length 2 [mm]: 581
- Bore Diameter [mm]: 35
-
Article number of recommended accessories: MK036,
PK012 - Weight [kg]: 3.6
- Packaging length [cm]: 75.7
- Packaging width [cm]: 5.4
- Packaging height [cm]: 5.6
- Housing length [mm]: 453
- Manufacturer: MONROE
Suspension: for vehicles without electronic suspension control, for vehicles with standard suspension Guarantee: 5 years guarantee with accessories when replaced in pairs
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks