Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 20
-
Fitting Position: Upper,
Front and Rear - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of blades/vanes: 11
- Diameter [mm]: 420
- Manufacturer: JP GROUP
- Lisainfo: Fan wheel
- Additional information: Fan wheel
- Outer Diameter [mm]: 460
- Number of fan blades: 11
- Heating/Cooling: for fluid friction coupling
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer Restriction: BMW
- Number of pins: 3
-
Supplementary Article/Supplementary Info: with socket housing,
with gasket/ seal - Supplementary Article/Info 2: with pipe
- Cable Cross Section [mm²]: 0.75
- Cable Length [mm]: 200
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
sensor- parkimisabi - Manufacturer: HBE
- Diameter [mm]: 465
- Weight [kg]: 1.9
- Packaging length [cm]: 56
- Packaging width [cm]: 55
- Packaging height [cm]: 14
-
for OE number: 11521712110,
11521712847
- Name: Viscous clutch
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW E39/E32/E38/E31
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
BMW E39/E32/E38/E31
(kvaliteediklass: PJ)"
- Outer Diameter [mm]: 160
- Assy./disassy. by qualified personnel required!:
-
Name: AB 004-
013- 0007 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Required quantity: 1
- Engine Code: M 60408S1
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Outer Diameter [mm]: 460
- Number of blades/vanes: 11
- Weight [kg]: 0.714
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Operating Mode: Thermic
- Observe the part manufacturer specifications:
- Manufacturer: TOPRAN
Heating/Cooling: Fluid Friction Coupling, for vehicles with fan (fluid friction coupling), excl. radiator fan General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 11527502804
- Outer Diameter [mm]: 160
- Height [mm]: 54
- Number of threaded holes: 3
- Thread Size: M6
- Pitch Circle Diameter, hub [mm]: 147
- Operating Mode: Thermic
-
Name: SIDUR,
RADIAATORIVENTILAATOR - Manufacturer: NRF
Heating/Cooling: for vehicles with fan (fluid friction coupling), excl. Radiator Fan
-
Material: Steel,
Aluminium - Number of fan blades: 11
- Number of mounting bores: 3
- Operating Mode: Thermic
- Outer Diameter [mm]: 160
-
Heating/Cooling: Fluid Friction Coupling,
excl. Radiator Fan - Manufacturer: JP GROUP
- Lisainfo: Viscous coupling for fan
- Additional information: Viscous coupling for fan
- Hole Spacing 1/Hole Spacing 2: 127mm
- Diameter [mm]: 160
- Weight [kg]: 1.02
- Thread Size: 22mm
- Spanner Size: 32mm
- Packaging length [cm]: 16.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 7.5
- Manufacturer: AKSDASIS
- Transmission Type: Automatic Transmission
-
Material: Steel,
Aluminium - Number of fan blades: 11
- Number of mounting bores: 3
- Operating Mode: Thermic
- Outer Diameter [mm]: 160
- Weight [kg]: 0.835
- Parameter: VL121R
-
Name: SIDUR,
RADIAATORIVENTILAATOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Temperature range from [°C]: 92
-
Name: SIDUR,
RADIAATORIVENTILAATOR - Manufacturer: MEY
- Rated Power [W]: 370
- Diameter [mm]: 395
- Vehicle Equipment: for vehicles with air conditioning
- Supplementary Article/Supplementary Info: with control unit
- Supplementary Article/Info 2: without radiator fan shroud
- Connector Shape: round
- Number of fan blades: 10
- Manufacturer: TYC
-
Lisainfo: 803-
0003 -
Additional information: 803-
0003
- Vehicle Equipment: for vehicles with air conditioning
- Diameter [mm]: 400
- Number of fan blades: 10
- Number of pins: 3
- Voltage [V]: 12
-
Supplementary Article/Info 2: with radiator fan shroud,
without resistor
- Vehicle Equipment: for vehicles with air conditioning
- Connector Shape: oval
- Diameter [mm]: 380
- Heating/Cooling: Single Fan
- Material: Plastic
- Number of fan blades: 10
- Number of pins: 3
- Power [W]: 272
- Rotation Direction: Clockwise rotation
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without control unit
-
Supplementary Article/Info 2: without radiator fan shroud,
without resistor - Name: NI 85648
- Manufacturer: NISSENS
-
Lisainfo: ALPINA B7
(E24- E28) 3.0 i -
Additional information: ALPINA B7
(E24- E28) 3.0 i
- Rotation Direction: Clockwise rotation
- Voltage [V]: 12
- Rated Power [W]: 250
- Diameter 1 [mm]: 400
- Number of fan blades: 10
-
Supplementary Article/Info 2: without radiator fan shroud,
with load resistor - Heating/Cooling: Single Fan
- Connector Shape: D Shape
- Number of pins: 3
-
Name: VENTILAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Diameter [mm]: 395
- Voltage [V]: 12
- Weight [kg]: 3.6
- Packaging length [cm]: 51
- Packaging width [cm]: 47
- Packaging height [cm]: 13
- Diameter [mm]: 160
- Operating Mode: Thermic
- Manufacturer Restriction: VISCO
- Manufacturer: MAHLE
- Number of bores: 3
- Packaging length [cm]: 16
- Packaging width [cm]: 16
- Packaging height [cm]: 7
- Net Weight [g]: 870
-
Name: Sidur,
radiaatoriventilaator
General Information: PREMIUM LINE - OE Quality for customers expecting the optimum
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks