• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 230
• Number of wear indicators [per axle]: 1
• Net weight [kg]: 0.02

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 237
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Brake Type: Disc Brake
• Fitting Position: Front Axle, Rear Axle
• for OE number: 1179820
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Number of wear indicators [per axle]: 1
• Length [mm]: 223
• Wear Warning Contact: Change warning contact together with the pads
• Brake Type: Disc Brake
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: both sides
• Brake Type: Disc Brake
• Length [mm]: 230
• Supplementary Article/Info 2: with protection hose
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Brake Type: Disc Brake
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.01
• Length [mm]: 220
• Manufacturer: 3RG

• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Length [mm]: 230
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: ABS

• Fitting Position: Rear Axle, Front Axle
• Length [mm]: 225
• Number of connectors: 2
• Brake Type: Disc Brake
• Weight [kg]: 0.025
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Length 1 [mm]: 230
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0109
• Quality class: PJ

Additional information: "Tootja: DELPHI
BMW
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BMW
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 260
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BREAK

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 230
• Brake Type: Disc Brake
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle, Rear Axle
• Construction Year to: 10.1995
• Brake Type: Disc Brake
• Length [mm]: 230
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 235
• Manufacturer: ATE
• Quality class: Q
• Name: Wear indicator

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 220
• Number of wear indicators [per axle]: 1
• Name: BR A 00 516
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 17
• Height [mm]: 45
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Manufacturer: KAMOKA
• Additional information: JQ1011700 KAMOKA
• Lisainfo: JQ1011700 KAMOKA

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Tootja piirang: ATE
• Kõrgus 1 (mm): 43,5
• Pidurisüsteem: ATE
• Laius 1 (mm): 123
• Jämedus/Tugevus 1 (mm): 16,5
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 123.1
• Article number of recommended accessories: KS0029, KS0020, KS0018, KS0017
• Brake System: ATE
• Height [mm]: 44.9
• Thickness [mm]: 17
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: incl. wear warning contact
• Height [mm]: 44.9
• Width [mm]: 123.1
• Thickness [mm]: 17
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Braking/Driving Dynamics Article Reference: for ABS
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Tootja piirang: ATE
• Kõrgus 1 (mm): 43,5
• Pidurisüsteem: ATE
• Laius 1 (mm): 123
• Jämedus/Tugevus 1 (mm): 16,5
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 45
• Thickness [mm]: 16.5
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 20996
• Weight [kg]: 1.05
• Manufacturer: VALEO
• Name: VA 301259

• Length [mm]: 123.2
• Thickness [mm]: 17.3
• Width [mm]: 123
• Height [mm]: 44.9
• Brake System: ATE
• Fitting Position: Rear Axle
• Manufacturer: VAICO

Wear Warning Contact: excl. wear warning contact, prepared for wear warning indicator General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 123.2
• Width [mm]: 44.9
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 0.969
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: Ate
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 45.2
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: with vibration damper
• Width 1 [mm]: 123.2
• Thickness 1 [mm]: 17
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Construction Year to: 01.1995
• Quantity per packing unit: 4
• FMSI Code: D396-7286
• Test Mark: E1 90R-01878/647
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20995, 20996
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 123.2
• Width 2 [mm]: 123
• Height 1 [mm]: 45
• Height 2 [mm]: 45
• Thickness 1 [mm]: 16.8
• Thickness 2 [mm]: 16.8
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP555

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Width 1 [mm]: 123
• Height 1 [mm]: 43.5
• Thickness 1 [mm]: 16.5
• Brake System: ATE
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 0.88
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Quantity per packing unit: 4
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 17,3
• Laius (mm): 123,1
• Kõrgus (mm): 44,9
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pidurisüsteem: ATE
• Kaal (kg): 0,85
• Manufacturer: TOMEX

• Fitting Position: Front Axle
• for OE number: 34111153910
• Manufacturer: ASHIKA-KLOCKI

• Quantity per packing unit: 4
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 17,3
• Laius (mm): 123,1
• Kõrgus (mm): 44,9
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Kulumishoiatus kontakt: koos kulumianduriga
• Piirangutega toode/piirangu info: koos lisadega
• Pidurisüsteem: ATE
• Hoiatuskontakti pikkus (mm): 160
• Kaal (kg): 0,86
• Manufacturer: TOMEX

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Thickness [mm]: 20.3
• Height [mm]: 63.5
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with piston clip
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20996
• Thickness [mm]: 17
• Width [mm]: 123.1
• Height [mm]: 45.1
• Brake System: ATE
• Manufacturer: BOSCH

Article number of recommended accessories: 1987474154, 1987474366, 1987474956, 1987474910, 1987474926, 1987474904

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: incl. wear warning contact
• Test Mark: E1 90R 01025/178
• Height [mm]: 44.9
• Width [mm]: 123.1
• Thickness [mm]: 17
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 10.1992
• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 156
• Height [mm]: 63.9
• Thickness [mm]: 19.5
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 21064
• Weight [kg]: 1.93
• Manufacturer: VALEO
• Name: VA 301231

• Fitting Position: Rear Axle
• Article number of recommended accessories: 98056400, 82028700
• Width [mm]: 123.2
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 20995
• Brake System: Teves
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 0.8
• Manufacturer: TEXTAR
• Lisainfo: 20995-17,3
• Additional information: 20995-17,3

• for OE number: 34 11 1 162 535
• Fitting Position: Front Axle
• Manufacturer: TRUCKTEC

• Length [mm]: 156.4, 155.4
• Width [mm]: 63.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Brake System: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.917
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 16442 FEBI
• Additional information: 16442 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 156.4
• Width [mm]: 63.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.986
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year to: 01.1995
• Quantity per packing unit: 4
• FMSI Code: D394-7284
• Test Mark: E1 90R-01881/644
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20968, 21064
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 156.6
• Width 2 [mm]: 156.3
• Height 1 [mm]: 63.9
• Height 2 [mm]: 63.9
• Thickness 1 [mm]: 19.8
• Thickness 2 [mm]: 19.8
• Name: DE LP602
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Width 1 [mm]: 156.4
• Height 1 [mm]: 64
• Thickness 1 [mm]: 20.3
• Brake System: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.72
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Length [mm]: 156, 155
• Width [mm]: 64
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Brake System: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.917
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 20
• Laius (mm): 156,4
• Kõrgus (mm): 63,5
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pidurisüsteem: ATE
• Kaal (kg): 1,65
• Manufacturer: TOMEX

• Length [mm]: 156.4, 155.4
• Width [mm]: 63.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Brake System: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.917
• Name: SW 20 91 6442
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 20
• Laius (mm): 156,4
• Kõrgus (mm): 63,5
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Kulumishoiatus kontakt: koos kulumianduriga
• Piirangutega toode/piirangu info: koos lisadega
• Pidurisüsteem: ATE
• Hoiatuskontakti pikkus (mm): 220
• Kaal (kg): 1,68
• Manufacturer: TOMEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 123
• Thickness [mm]: 17
• Height [mm]: 45
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• WVA Number: 20995, 20996
• Manufacturer: BREMBO

• Length [mm]: 156.4
• Width [mm]: 63.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.986
• Name: SW 20 91 6000
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 45
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 20995
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 156
• Thickness [mm]: 20
• Height [mm]: 64
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• WVA Number: 20968, 21064
• Manufacturer: BREMBO
• Name: BR P 06 012

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Spring Clip Diameter [mm]: 25.5
• Test Mark: E1 90R-02A0498/0352
• Brake System: ATE
• MAPP code available:
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0214.2

• Fitting Position: Front Axle
• Article number of recommended accessories: 98056400, 82028600
• Width [mm]: 156.5
• Height [mm]: 63.9
• Thickness [mm]: 20.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 20968
• Brake System: Teves
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 1.9
• Manufacturer: TEXTAR

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 20968, 21064
• Test Mark: E1 90R-01811/100
• Width [mm]: 156.3
• Thickness [mm]: 20.3
• Height [mm]: 63.9
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E9 90R 01705/005
• Height [mm]: 63.5
• Width [mm]: 156.4
• Thickness [mm]: 20
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Article number of recommended accessories: 8DK 355 252-741, 8DZ 355 201-141
• Quantity per packing unit: 4
• Width [mm]: 123.2
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 20995
• Brake System: Teves
• Weight [kg]: 0.8
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DB355007421
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with anti-squeak plate, with piston clip
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20968
• Thickness [mm]: 20
• Width [mm]: 156.6
• Height [mm]: 64
• Brake System: ATE
• Manufacturer: BOSCH

Article number of recommended accessories: 1987473047, 1987474029, 1987474960, 1987474951, 1987474957, 1987474910

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 63.5
• Thickness [mm]: 20.3
• Brake System: ATE
• Test Mark: E1 90R-02A0334/0293
• MAPP code available:
• Article number of recommended accessories: 24.8190-0210.2, 24.8190-0214.2, 24.8190-0224.2
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 156
• Height [mm]: 64
• Thickness [mm]: 20
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 20968
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN