Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)



- Number of pins: 2
- Colour: blue
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins


- Construction Year from: 09.1995
- Length [mm]: 55
- Spanner Size: 19
- Colour: brown
-
Material: Brass,
Plastic - Number of pins: 1
-
Thread Size: M14x1,
5 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX





- Length [mm]: 50
- Spanner Size: 19
- Housing Colour: blue
- Manufacturer: KAMOKA






























-
Engine Code: M43 B18
(184E2) - Number of pins: 2
- Manufacturer: KAVO PARTS


- Connector Shape: rectangular
- Colour Coding: blue
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Number of pins: 2
- Switch Point [°C]: 140
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Thread Size: M12x1.5
- Spanner Size: 19
- Manufacturer: FAST





























































-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of pins: 2
- Colour Coding: blue
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Spanner Size: 19
- Colour: blue
- Number of pins: 2
-
Thread Size: M12x1,
5 - Length [mm]: 51
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
-
Lisainfo: 21-
0124 -
Additional information: 21-
0124


- Construction Year from: 09.1995
- Length [mm]: 55
-
External Thread Size: M14 x 1,
5 - Spanner Size: 19
- Number of connectors: 1
- Colour: brown
-
Material: Brass,
Plastic - Switch Point [°C]: 130
- Screw length below head [mm]: 29
- Weight [kg]: 0.03
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Construction Year from: 09.1995
- Length [mm]: 55
-
External Thread Size: M14 x 1,
5 - Spanner Size: 19
- Number of connectors: 1
- Colour: black
-
Material: Brass,
Plastic - Switch Point [°C]: 130
- Screw length below head [mm]: 29
- Weight [kg]: 0.032
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Construction Year from: 09.1995
- Length [mm]: 55
-
External Thread Size: M14 x 1,
5 - Spanner Size: 19
- Number of connectors: 1
- Colour: brown
-
Material: Plastic,
Brass - Switch Point [°C]: 130
- Screw length below head [mm]: 29
- Weight [kg]: 0.03
- Name: SW 20 93 6416
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Engine Code: M43 B18
(184E2) - Colour: brown
-
Thread Size: M14x1,
5 - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS


- Construction Year from: 09.1995
- Thread Size: M14x1.5
- Manufacturer: VERNET


-
Engine Code: M43 B18
(184E2) - Colour: brown
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Manufacturer: FACET













































- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: black
- Spanner Size: 19
- Thread Size: M14x1.5
- for OE number: 12621710535
- Manufacturer: NRF





- Length 1 [mm]: 118
- Length 2 [mm]: 95
-
Fabrication Number: CZW-
BM- 018A - Manufacturer: NTY
-
Name: NTY CZW-
BM- 018A
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.














































-
Anduritüüp: NTC-
andur - Montaaživiis: kruvitud
- Pistikukatte kuju: ristkülik
- Pistikkontaktide arv: 2
- Võtmekaugus: 19
- Keermemõõt: M12x1.5
- OE-numbri jaoks: 195321101000
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF






- Length 1 [mm]: 118
- Length 2 [mm]: 95
- Manufacturer: KAMOKA


- Construction Year from: 09.1995
- Number of pins: 2
- Length [mm]: 109
-
Name: ANDUR,
JAHUTUSVEDELIKUTASE - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Construction Year to: 09.1995
- Number of pins: 2
- Length [mm]: 95
-
Name: ANDUR,
JAHUTUSVEDELIKUTASE - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Sensor Type: NTC Sensor
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY



- Colour: blue
- Manufacturer Restriction: für BOSCH
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Temperature range [°C]: 25,
80 - Power [W]: 0.06
- Manufacturer: METZGER



- Construction Year from: 09.1995
- Number of pins: 2
- Length 1 [mm]: 118
- Length 2 [mm]: 95
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV638





-
Keermemõõt: M12 x 1,
5 - Võtmekaugus: 19
- Pistikkontaktide arv: 2
- Pistikukatte kuju: ristkülik
- Manufacturer: ERA













































- Number of pins: 2
- Fitting Depth [mm]: 40
- for OE number: 61318360855
- Manufacturer: NRF



- Construction Year to: 09.1995
- Vehicle Equipment: for vehicles with air conditioning
- Length [mm]: 95
- Sensor Type: Passive sensor
- Number of pins: 2
- Combi Switch Function: Reed Contact
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Operating voltage [V]: 12
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV639
- Manufacturer: ESEN SKV


-
Engine Code: M43 B18
(184E2) - Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Colour: blue
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY


-
Engine Code: M43 B18
(184E2) - Colour: blue
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.113,
1.880.114, 1.880.149, 1.880.151 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS


- Thread Size: M12x1.5
- Manufacturer: VERNET


-
Engine Code: M43 B18
(184E2) - Colour: blue
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 7.8113,
7.8114, 7.8149, 7.8151 - Manufacturer: FACET


- Housing Colour: blue
- Number of pins: 2
-
Thread Size: M12X1.5-
6g - Spanner Size: 19
- Manufacturer: DELPHI
- Name: DE TS10250


- Length [mm]: 51
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 11
- Spanner Size: 19
- Number of connectors: 2
- Colour Coding: blue
- Switch Point [°C]: 20
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Construction Year to: 03.1996
- Pistikkontaktide arv: 2
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.





























































-
Engine Code: M43 B18
(184E2) - Colour: blue
- Number of pins: 2
- Height [mm]: 51.8
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M12x1,
5 - Housing Colour: blue
- Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.





























































- Vehicle Equipment: for vehicles with headlamp cleaning system
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Length [mm]: 50.7
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 11
- Spanner Size: 19
- Number of connectors: 2
- Colour: blue
- Colour Coding: blue
- Switch Point [°C]: 20
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Name: SW 40 91 7695
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


Manufacturer: FAE


- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 628,
74 - Temperature range from [°C]: 25
- Temperature range to [°C]: +80
-
Thread Size: M14x1,
5 - Colour: brown
- Sensor Type: NTC Sensor
- Number of pins: 1
- Corresponds to the original part in colour: brown
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107211
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.





-
Thread Size: M14 x 1,
5 - Manufacturer: ERA


- Construction Year from: 09.1995
-
Length [mm]: 118,
95 - Number of connectors: 2
- Weight [kg]: 0.03
-
Name: ANDUR,
JAHUTUSVEDELIKUTASE - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Engine Code: M43 B18
(184E2) - Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 302 -
Supplementary Article/Supplementary Info: with gasket/
seal - Temperature range from [°C]: 25
- Temperature range to [°C]: +80
-
Thread Size: M12x1,
5 - Colour: blue
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Corresponds to the original part in colour: blue
- Manufacturer Restriction: Bosch
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.


-
Engine Code: M43 B18
(184E2) - Colour: black
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Name: EP 1.830.176
- Manufacturer: EPS


-
Engine Code: M43 B18
(184E2) - Colour: black
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Manufacturer: FACET



- Vehicle Equipment: for vehicles with headlamp cleaning system
- Length [mm]: 97.5
- Number of connectors: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV647


































-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: BOS


Manufacturer: MAGNETI MARELLI


- Construction Year from: 03.1996
- Number of pins: 2
- Version: IAM
- Alternative Repair Kit: 0901193
- Manufacturer: METZGER


- Connector Shape: rectangular
- Number of pins: 3
- Supplementary Article/Info 2: with cable
-
Name: ANDUR,
VNTVOLL - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Construction Year to: 03.1996
- Number of pins: 2
- Manufacturer: METZGER




- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Number of pins: 2
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV706


- Number of pins: 3
- Connector Shape: rectangular
- Cable Length [mm]: 660
- Sensor Type: Inductive Sensor
- for OE number: 12141720858
-
Name: Andur,
vntvoll - Manufacturer: MD


- Cable Length [mm]: 855
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11022





























































- Number of pins: 3
- Length [mm]: 660
- Required quantity: 1
- Cable Length [mm]: 600
-
Sensor Type: Passive sensor,
Inductive Sensor - Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: with cable
- Connector Shape: rectangular
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.





- Resistor [Ohm]: 680
- Cable Length [mm]: 850
- Number of pins: 3
- Fitting Depth [mm]: 24
- Manufacturer: ERA


-
Engine Code: M43 B18
(184E2) - Length [mm]: 960
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS





























































- Engine Code: M43B18
- Length [mm]: 960
- Resistor [Ohm]: 550
- Cable Length [mm]: 880
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Cable Length [mm]: 735
- Manufacturer: FAE




-
Engine Code: M43 B18
(184E2) - alternatively:
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: angled
- Supplementary Article/Info 2: with cable
- Resistor [Ohm]: 550
- Weight [kg]: 0.12
- Manufacturer: VALEO
- Name: VA 254135




-
Engine Code: M43 B18
(184E2) - Sensor Type: Inductive Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: angled
- Supplementary Article/Info 2: with cable
- Resistor [Ohm]: 550
- Weight [kg]: 0.11
- Manufacturer: VALEO














































- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 1
- Socket colour: black
- Spanner Size: 19
- Thread Size: M14x1.5
- for OE number: 12621710512
- Supplementary Article/Info 2: with seal ring