• for OE number: 11 61 7 504 536
• Manufacturer: KAMOKA

• Climate Zones: for cold climate zones
• Fitting Position: Upper
• Name: Voolik,Karterituulutus
• Manufacturer: MAX

• Material: Plastic
• for OE number: 11617504535
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: GPP-BM-110
• Manufacturer: NTY

• Climate Zones: not for cold climate zones
• Material: Plastic
• Fitting Position: Centre
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Material: Plastic
• for OE number: 11 61 7 533 398
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Climate Zones: for cold climate zones
• Air Supply Hoses/Pipes: from oil separator to oil dipstick
• Material: Plastic
• Colour: black
• Hose Length [mm]: 265
• Inner Diameter 1 [mm]: 10
• Inner Diameter 2 [mm]: 10
• Name: Voolik,Karterituulutus
• Manufacturer: GAT

• Climate Zones: not for cold climate zones
• Material: Plastic
• Fitting Position: Lower
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Air Supply Hoses/Pipes: from the secondary air pump to secondary air valve
• Material: ACM (Polyacrylate)
• Colour: black
• Hose Length [mm]: 200
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 18
• Manufacturer: GATES

• Climate Zones: for cold climate zones
• Material: Plastic
• Colour: black
• Hose Length [mm]: 290
• Inner Diameter 1 [mm]: 14
• Inner Diameter 2 [mm]: 12
• Manufacturer: RAPRO

• Climate Zones: for cold climate zones
• Fitting Position: Upper
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Climate Zones: not for cold climate zones
• Material: Plastic
• Fitting Position: Lower
• Weight [kg]: 0.075
• Observe service information:
• Manufacturer: ENERGY

• for OE number: 11 61 7 533 398
• Manufacturer: KAMOKA

• Climate Zones: not for cold climate zones
• Air Supply Hoses/Pipes: from oil separator to oil dipstick
• Material: Rubber
• Colour: black
• Hose Length [mm]: 265
• Inner Diameter 1 [mm]: 10
• Inner Diameter 2 [mm]: 10
• Name: Voolik,Karterituulutus
• Manufacturer: GAT

• Climate Zones: not for cold climate zones
• Colour: black
• Material: Plastic
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Upper
• Weight [kg]: 0.029
• Observe service information:
• Manufacturer: ENERGY

• Climate Zones: for cold climate zones
• Material: PA (polyamide)
• Fitting Position: Lower
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Material: Rubber, Plastic
• Fitting Position: Upper
• Weight [kg]: 0.03
• Observe service information:
• Manufacturer: ENERGY

• Material: Rubber, Plastic
• Fitting Position: Upper
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Climate Zones: not for cold climate zones
• Material: Plastic
• Fitting Position: Upper
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• for OE number: 11 61 7 533 398
• Length [mm]: 355
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Climate Zones: not for cold climate zones
• Material: Plastic
• Fitting Position: Lower
• Weight [kg]: 0.075
• Observe service information:
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 17
• Hose Length [mm]: 265
• Material: PA (polyamide)
• Fitting Position: Lower
• Weight [kg]: 0.79
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Air Supply Hoses/Pipes: from hose to intake
• Material: Plastic
• Colour: black
• Hose Length [mm]: 420
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 5
• Name: Voolik,Karterituulutus
• Manufacturer: GAT

• Climate Zones: not for cold climate zones
• Material: Plastic
• Fitting Position: Lower
• Weight [kg]: 0.075
• Name: SW 20 93 3113
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Upper
• Weight [kg]: 0.039
• Observe service information:
• Manufacturer: ENERGY

• for OE number: 11611432560, 11617504535
• Weight [g]: 42
• Inner Diameter 1 [mm]: 15
• Inner Diameter 2 [mm]: 13
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Climate Zones: for cold climate zones
• Name: klapp, karterituulutus
• Manufacturer: MAX

• Climate Zones: for cold climate zones
• Fitting Position: Lower
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Climate Zones: for cold climate zones
• Fitting Position: Centre
• Name: Voolik,Karterituulutus
• Manufacturer: MAX

• for OE number: 11 61 1 432 559
• Length [mm]: 165
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Climate Zones: for cold climate zones
• Hose Length [mm]: 305
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Centre
• Weight [kg]: 0.073
• Observe service information:
• Manufacturer: ENERGY

• Material: Plastic
• for OE number: 11 61 7 533 400
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Climate Zones: for cold climate zones
• Air Supply Hoses/Pipes: from oil separator to intake
• Material: Plastic
• Colour: black
• Hose Length [mm]: 290
• Inner Diameter 1 [mm]: 14
• Inner Diameter 2 [mm]: 12
• Manufacturer: GATES

• Climate Zones: not for cold climate zones
• Material: Plastic
• Name: OLIERALDAJA, KARTERITUULUTUS
• Manufacturer: MAX
• Lisainfo: 28-0252
• Additional information: 28-0252

• Climate Zones: not for cold climate zones
• Fitting Position: from cylinder head cover to oil separator
• Material: Plastic
• Colour: black
• Hose Length [mm]: 355
• Inner Diameter 1 [mm]: 16
• Inner Diameter 2 [mm]: 16
• Manufacturer: GATES

• Climate Zones: not for cold climate zones
• Colour: black
• Material: Plastic
• Fitting Position: Centre
• Weight [kg]: 0.048
• Observe service information:
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Rubber, Plastic
• Fitting Position: Upper
• Weight [kg]: 0.03
• Observe service information:
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: not for cold climate zones
• Material: Plastic
• Weight [kg]: 0.177
• for OE number: 11 61 7 501 566
• Observe service information:
• Manufacturer: ENERGY

• Climate Zones: not for cold climate zones, for cold climate zones
• Fitting Position: Left Rear
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left
• Climate Zones: for cold climate zones
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Climate Zones: not for cold climate zones
• Colour: black
• Material: Plastic
• Fitting Position: Centre
• Weight [kg]: 0.048
• Name: SW 20 94 6301
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Hose Length [mm]: 305
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Centre
• Weight [kg]: 0.073
• Observe service information:
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: not for cold climate zones
• Colour: black
• Material: Plastic
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Upper
• Weight [kg]: 0.029
• Observe service information:
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Forward- /Backflow: for backflow
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Climate Zones: for cold climate zones
• Number of inlets/outlets: 3
• Inlet Diameter 1 [mm]: 26
• Inlet Diameter 2 [mm]: 18
• Outlet Ø [mm]: 23
• Name: klapp, karterituulutus
• Manufacturer: MEY

• Climate Zones: not for cold climate zones
• Air Supply Hoses/Pipes: from oil separator to intake
• Material: Plastic
• Colour: black
• Hose Length [mm]: 290
• Inner Diameter 1 [mm]: 14.5
• Inner Diameter 2 [mm]: 12.5
• Manufacturer: GATES

• Climate Zones: for cold climate zones
• Material: PA (polyamide), PU (Polyurethane)
• Name: OLIERALDAJA, KARTERITUULUTUS
• Manufacturer: MAX
• Lisainfo: 18-0406
• Additional information: 18-0406

• Climate Zones: not for cold climate zones
• Material: Plastic
• Weight [kg]: 0.177
• for OE number: 11 61 7 501 566
• Observe service information:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Upper
• Weight [kg]: 0.039
• Observe service information:
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Material: PA (polyamide), PU (Polyurethane)
• Weight [kg]: 0.3
• Observe service information:
• Manufacturer: ENERGY

• Climate Zones: not for cold climate zones
• Material: Plastic
• Weight [kg]: 0.177
• for OE number: 11 61 7 501 566
• Name: SW 20 92 6100
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Plastic
• Climate Zones: not for cold climate zones
• for OE number: 11617501566
• Manufacturer: MEAT&DORIA

• for OE number: 11617547582
• Weight [g]: 147
• Inner Diameter 1 [mm]: 11
• Inner Diameter 2 [mm]: 10
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Recommended change interval [km]: 60
• Recommended change interval [years]: 3
• Valve Type: Breather Valve, Diaphragm Valve
• Fuel Type: Petrol
• Operating Mode: Pressure Controlled
• Packaging height [cm]: 10.3
• Packaging length [cm]: 17.5
• Net Weight [g]: 189
• Packaging width [cm]: 9.8
• Name: KN LOS207
• Manufacturer: KNECHT

• Climate Zones: not for cold climate zones
• Material: Plastic
• Colour: black
• Manufacturer: GATES

Manufacturer: ERA

• Supplementary Article/Supplementary Info: with cold insulation
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity Unit: Kit
• Number of Parts [parts]: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Climate Zones: not for cold climate zones
• Filter type: for oil mist separator
• Manufacturer: HENGST FILTER

• Climate Zones: not for cold climate zones
• Height [mm]: 61
• Operating Mode: Pressure Controlled
• Housing material: Polyamid 6.6
• Fitting Position: engine sided
• Recommended change interval [years]: 3
• Article number of recommended accessories: V20-1871
• Width [mm]: 116
• Valve Type: Breather Valve, Diaphragm Valve
• Recommended change interval [km]: 60,000
• Observe service information:
• Length [mm]: 165
• Observe technical data:
• Observe the vehicle manufacturer specifications:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Plastic
• Fabrication Number: EPCV-BM-010
• Manufacturer: NTY
• Name: NTY EPCV-BM-010

• Quantity Unit: Kit
• Number of Parts [parts]: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 004-028-057

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Guarantee: 3 years guarantee
• New Part:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.13
• Manufacturer: SKV GERMANY
• Name: CE 31SKV161

• Climate Zones: for cold climate zones
• Material: Plastic
• Colour: black
• Name: Olieraldaja, karterituulutus
• Manufacturer: GAT

• Filter type: for oil mist separator
• Length [mm]: 117
• Width [mm]: 117
• Height [mm]: 178
• Manufacturer: HENGST FILTER

• Climate Zones: for cold climate zones
• Material: PA (polyamide), PU (Polyurethane)
• Weight [kg]: 0.3
• Observe service information:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Width [mm]: 108
• Height [mm]: 124
• Valve Type: Breather Valve, Diaphragm Valve
• Recommended change interval [years]: 3
• Fitting Position: Cylinder Head
• Article number of recommended accessories: V20-1872
• for OE number: 11 61 7 533 400
• Length [mm]: 176
• Operating Mode: Pressure Controlled
• Housing material: Polyamid 6.6
• Observe technical data:
• Recommended change interval [km]: 60,000
• Observe service information:
• Observe the vehicle manufacturer specifications:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Climate Zones: not for cold climate zones
• Material: Plastic
• Supplementary Article/Supplementary Info: with accessories
• Name: REMONDIKOMPLEKT, KARTERITUULUTUS
• Manufacturer: MAX

• Climate Zones: not for cold climate zones
• Manufacturer: YSPARTS

• Quantity Unit: Kit
• Number of Parts [parts]: 5
• Material: Plastic
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 004-028-067

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Climate Zones: for cold climate zones
• for OE number: 11 61 7 533 400
• Name: REMONDIKOMPLEKT, KARTERITUULUTUS
• Manufacturer: MAX

• Air Supply Hoses/Pipes: Intake manifold to intake
• Material: NBR (nitrile butadiene rubber)
• Colour: black
• Hose Length [mm]: 545
• Inner Diameter 1 [mm]: 11
• Inner Diameter 2 [mm]: 9.5
• Manufacturer: GATES

• Climate Zones: for cold climate zones
• Weight [kg]: 0.41
• for OE number: 11 61 7 534 237
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Parts [parts]: 5
• for components see parts list:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per packing unit: 5
• Supplementary Article/Supplementary Info: with accessories
• Full Set:
• Manufacturer: ERA

• Climate Zones: not for cold climate zones
• Colour: black
• Material: Plastic
• Weight [kg]: 0.33
• Supplementary Article/Supplementary Info: with fastening/mounting material
• for OE number: 11 61 7 501 566 S1
• Observe service information:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Valve Type: Diaphragm Valve, Breather Valve
• Observe technical data:
• Full Set:
• Recommended change interval [years]: 3
• Observe service information:
• Housing material: Polyamid 6.6
• Operating Mode: Pressure Controlled
• Recommended change interval [km]: 60,000
• Supplementary Article/Supplementary Info: with hose
• Observe the vehicle manufacturer specifications:
• Fitting Position: Cylinder Head
• Quantity Unit: Set
• Climate Zones: for cold climate zones
• See accessories list for additionally required parts:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Climate Zones: not for cold climate zones
• Colour: black
• Material: Plastic
• for OE number: 11 61 7 501 566 S1
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 20 94 6303
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Weight [kg]: 0.51
• for OE number: 11 61 7 533 400 S1
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Climate Zones: for cold climate zones
• Supplementary Article/Supplementary Info: with hose
• Version: Kaltland
• Manufacturer: METZGER

• Climate Zones: for cold climate zones, not for cold climate zones
• Full Set:
• Operating Mode: Pressure Controlled
• Valve Type: Breather Valve, Diaphragm Valve
• Supplementary Article/Supplementary Info: with hose
• Quantity Unit: Set
• See accessories list for additionally required parts:
• Housing material: Polyamid 6.6
• Recommended change interval [km]: 60,000
• Observe service information:
• Fitting Position: Cylinder Head
• Observe technical data:
• Recommended change interval [years]: 3
• Observe the vehicle manufacturer specifications:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity Unit: Set
• for components see parts list:
• Number of Parts [parts]: 5
• Supplementary Article/Supplementary Info: with cold insulation
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.