• Fitting Position: Valve Unit
• Quantity per packing unit: 50
• Inner Diameter [mm]: 21.3
• Thickness [mm]: 1.78
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Name: Rongastihend
• Manufacturer: ELR

• Fitting Position: Valve Unit
• Quantity per packing unit: 50
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 41
• Thickness [mm]: 3.52
• Material: ACM (Polyacrylate)
• Shape: O-Ring
• Name: Rongastihend
• Manufacturer: ELR

• Length [mm]: 86
• Overall Length [mm]: 94.3
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Strength class: 12.9
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: DRM 02125
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Quantity per packing unit: 5
• Number of mounting bores: 2
• Fitting Position: Cylinder Head
• Manufacturer: ELRING

• Name: Tihend, klapikaan
• Manufacturer: DRM

• Fitting Position: Rear
• Weight [kg]: 0.04
• Colour: black
• Material: Rubber, Plastic
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 96SKV215
• Manufacturer: ESEN SKV

• Colour: black
• Material: Plastic, Rubber
• Fitting Position: Rear
• Weight [kg]: 0.043
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Seal Material: FPM (fluoride rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Supplementary Info: with gaskets/seals
• Fitting Position: Rear
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Electric-hydraulic
• Supplementary Article/Supplementary Info: Incl. Strainer
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Fabrication Number: EFR-BM-000
• Manufacturer: NTY
• Name: NTY EFR-BM-000

• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: MAX

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.27
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 39SKV013

• Article number of recommended accessories: TC2020K
• Manufacturer: BGA

• Operating Mode: Electric-hydraulic
• Supplementary Article/Supplementary Info: Incl. Strainer
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular
• Manufacturer: KAMOKA

• Engine Code: N46 B20 A, N46 B20 C
• Manufacturer: MAGNETI MARELLI

• Operating Mode: Electric-hydraulic
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 110
• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.243
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Number of pins: 2
• Pin Shape: Flat
• Plug Type: Male
• Material: Metal
• Length [mm]: 110
• Width [mm]: 40
• Height [mm]: 40
• Manufacturer: GATES

• Length [mm]: 110
• Number of connectors: 2
• Fitting Position: Intake Side, Exhaust Side
• Weight [kg]: 0.243
• Name: SW 20 10 3361
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N46 B20 A
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: FAI

• Number of pins: 9
• Name: Andur, ekstsentrikvoll (varieeruv klapisurve)
• Manufacturer: MAX

• Colour: chrome/black
• Number of pins: 9
• Fabrication Number: ECP-BM-013
• Manufacturer: NTY
• Name: NTY ECP-BM-013

• Valve type: for inlet valves, for exhaust valves
• Number of connectors: 2
• Manufacturer: ERA

• Valve type: Solenoid Valve
• Number of pins: 2
• Supplementary Article/Supplementary Info: Incl. Strainer
• Version: Neue Ausführung
• Manufacturer: METZGER

• Fabrication Number: ERZ-BM-000
• Manufacturer: NTY

• Engine Code: N46 B20 A
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring
• Name: JUHTKLAPP,NUKKVOLLI ASEND
• Manufacturer: PIE

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 9
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: RKZ-BM-007
• Number of Teeth: 38
• Manufacturer: NTY

• Fabrication Number: RKZ-BM-006
• Number of Teeth: 38
• Manufacturer: NTY

• Number of Teeth: 38
• paired article number: 54-1489
• Inner Diameter [mm]: 13
• Fitting Position: Exhaust Side
• Supplementary Article/Info 2: with screw
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Number of Teeth: 38
• paired article number: 54-1490
• Inner Diameter [mm]: 13
• Fitting Position: Intake Side
• Supplementary Article/Info 2: with screw
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Number of Teeth: 38
• Fitting Position: Intake Side
• Guarantee: 3 years guarantee
• paired article number: 39SKV514
• Weight [kg]: 0.88
• Always compare old and new part (in particular OE No.):
• Name: CE 39SKV513
• Manufacturer: ESEN SKV

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Guarantee: 3 years guarantee
• paired article number: 39SKV513
• Weight [kg]: 0.88
• Always compare old and new part (in particular OE No.):
• Name: CE 39SKV514
• Manufacturer: ESEN SKV

• Height [mm]: 43
• Fitting Position: Exhaust Side
• Supplementary Article/Info 2: with screw
• Number of Teeth: 38
• Manufacturer: KAMOKA

• Height [mm]: 43
• Fitting Position: Intake Side
• Supplementary Article/Info 2: with screw
• Number of Teeth: 38
• Manufacturer: KAMOKA

• Weight [kg]: 1.13
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV086

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Assy./disassy. by qualified personnel required!:
• Supplementary Article/Info 2: Requires special tools for mounting
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Intake Side
• Number of Teeth: 38
• Assy./disassy. by qualified personnel required!:
• Supplementary Article/Info 2: Requires special tools for mounting
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: DRM

• Fitting Position: Intake Side
• Number of Teeth: 38
• Engine Timing: Timing Chain
• paired article number: 503 460
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Engine Timing: Timing Chain
• paired article number: 503 459
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Intake Side
• Engine Code: N46 B20 A
• Number of Teeth: 38
• Name: Nukkvolliseadistaja
• Manufacturer: MVE

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• Fitting Position: Intake Side
• Number of Teeth: 38
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• paired article number: 47571
• Thickness [mm]: 44
• Inner Diameter [mm]: 13
• Number of Teeth: 38
• Fitting Position: Exhaust Side
• Weight [kg]: 0.84
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 47572
• Thickness [mm]: 44
• Inner Diameter [mm]: 13
• Number of Teeth: 38
• Fitting Position: Intake Side
• Weight [kg]: 0.84
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Intake Side
• Number of bolts/screws: 1
• Number of Teeth: 38
• Manufacturer: SKF NAPINACZE POMPY

• Fitting Position: Exhaust Side
• Number of bolts/screws: 1
• Number of Teeth: 38
• Manufacturer: SKF

• Engine Code: N46 B20 B
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Manufacturer: VDO

Name: Seadeelement, ekstsentrikvoll (varieeruv klapisurve)

• paired article number: 20 94 7572
• Thickness [mm]: 44
• Inner Diameter [mm]: 13
• Number of Teeth: 38
• Fitting Position: Intake Side
• Weight [kg]: 0.84
• Supplementary Article/Info 2: with screw
• Observe service information:
• Name: SW 20 94 7571
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Weight [kg]: 0.94
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Seadeelement, ekstsentrikvoll (varieeruv klapisurve)

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• for OE number: 11361707315
• Manufacturer: HEPU

• Fitting Position: Intake Side
• Number of Teeth: 38
• paired article number: 58384
• Supplementary Article/Info 2: with screw
• Observe mounting information:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Exhaust Side
• Number of Teeth: 38
• paired article number: 58385
• Supplementary Article/Info 2: with screw
• Observe mounting information:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of Teeth: 38
• Fitting Position: Intake Side
• for OE number: 11367500032
• Manufacturer: HEPU

• Number of Teeth: 38
• Fitting Position: Exhaust Side
• paired article number: at22782
• Guarantee: 3 years guarantee
• for OE number: 11 36 1 707 315
• Operating Mode: Hydraulic
• Supplementary Article/Info 2: with screw
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Number of Teeth: 38
• Fitting Position: Intake Side
• paired article number: at22781
• for OE number: 11 36 7 500 032
• Guarantee: 3 years guarantee
• Supplementary Article/Info 2: with screw
• Operating Mode: Hydraulic
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: N46 B20 B
• Colour: chrome/black
• Number of pins: 9
• Name: Andur, ekstsentrikvoll (varieeruv klapisurve)
• Manufacturer: VDO