Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 5
- Diameter [mm]: 5.8
- Length [mm]: 20
-
Name: KOEK ROZPOROWY,
NIT Z TWORZYWA SZTUCZNEGO BMW - Manufacturer: FIS
- Quantity per packing unit: 10
- Diameter [mm]: 5.8
- Length [mm]: 20
- Alternatively:
-
paired article number: 10-
20009.5, 10- 20009.25 -
Name: KOEK ROZPOROWY,
NIT Z TWORZYWA SZTUCZNEGO BMW - Manufacturer: FIS
- Fitting Position: Left
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear
- Colour: white
- Sensor Type: Ultrasonic Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Quantity per packing unit: 25
- Diameter [mm]: 5.8
- Length [mm]: 20
- Alternatively:
-
paired article number: 10-
20009.5, 10- 20009.10 -
Name: KOEK ROZPOROWY,
NIT Z TWORZYWA SZTUCZNEGO BMW - Manufacturer: FIS
-
Fitting Position: both sides,
Rear - Socket colour: white
-
Fabrication Number: EPDC-
BM- 015 - Manufacturer: NTY
-
Name: NTY EPDC-
BM- 015
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear
- Sensor Type: Ultrasonic Sensor
- Assy./disassy. by qualified personnel required!:
-
Lisainfo: ABA120-
01- 012 -
Additional information: ABA120-
01- 012
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear
- Colour: black
- Sensor Type: Ultrasonic Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Fitting Position: both sides,
Rear -
Fabrication Number: EPDC-
BM- 010 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: both sides,
Rear - Socket colour: black
-
Fabrication Number: EPDC-
BM- 014 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: inner,
Left, Right, outer, Rear - Construction Year to: 07.2006
- Sensor Type: Ultrasonic Sensor
- Length [mm]: 70
- Length from [mm]: 70
- Width [mm]: 70
- Height [mm]: 70
- Colour: black
- Shape: straight
- Surface: primed
- Number of connectors: 3
- Chemical Properties: Paintable
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
-
Fitting Position: both sides,
Rear - Sensor Type: Ultrasonic Sensor
- Colour: black
- Shape: straight
- Surface: primed
- Number of connectors: 3
- Chemical Properties: Paintable
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
- Construction Year to: 07.2006
- Fitting Position: Rear
- Manufacturer: YSPARTS
- Fitting Position: Rear
- Voltage [V]: 12
- Shape: straight
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV003
- for OE number: 66 20 6 989 067
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: MAX
-
Lisainfo: 27-
1278 -
Additional information: 27-
1278
-
Fitting Position: both sides,
Rear - Required quantity: 4
-
Supplementary Article/Supplementary Info: without gaskets/
seals - Diameter [mm]: 22.98
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
- Fitting Position: Rear
- Number of pins: 3
- Socket colour: white
- Shape: straight
- Chemical Properties: Paintable
- Manufacturer: FAE ELEKTRYKA
- Required quantity: 4
- Fitting Position: Rear
-
Chemical Properties: Over-
paintable - Colour: black
- Number of pins: 3
- Shape: straight
- Sensor Type: Ultrasonic Sensor
-
Name: Sensor,
parkimisabi - Manufacturer: MEY
- Required quantity: 4
-
Fitting Position: both sides,
Rear - Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: mounting
- Socket colour: white
- Assy./disassy. by qualified personnel required!:
- Sensor Type: Ultrasonic Sensor
- Name: HE 6PX358270411
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- for OE number: 66 20 6 989 067
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: TRU
- Number of pins: 3
- Version: IAM
-
Fitting Position: Rear,
Front -
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Observe the vehicle manufacturer specifications:
- Manufacturer: METZGER
- Required quantity: 4
-
Fitting Position: both sides,
Rear - Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: Plugged
- Socket colour: black
- Shape: straight
- Shaft form: round
- Assy./disassy. by qualified personnel required!:
-
Name: Sensor,
parkimisabi - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Quantity: 4
-
Fitting Position: both sides,
Rear - Colour: black
- Shape: straight
- Sensor Type: Ultrasonic Sensor
- Surface: primed
- Number of connectors: 3
- Chemical Properties: Paintable
- Housing Colour: black
- See accessories list for additionally required parts:
-
Article number of recommended accessories: V99-
72- 0002 - Version: alte Ausführung
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 07.2006
-
Fitting Position: outer,
inner, Left, Right, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: not paintable
- Length [mm]: 28
- Width [mm]: 23.15
- Height [mm]: 62.1
- Number of pins: 3
- Diameter [mm]: 16.6
-
Name: Sensor,
parkimisabi - Manufacturer: VAL
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks