Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Catalytic Converter Type: for vehicles without catalytic convertor
- Country Specific Design: Japan
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
- Colour Coding: brown
- Number of connectors: 1
-
External Thread [mm]: M12x1,
5 - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Switch Pressure [bar]: 0.4
- Thread Size: M12x1.5
-
Sensor Type: Closed-
type Sensor - Name: OLISURVELLITUS
- Manufacturer: VER
-
Engine Code: M20 B20
(206EA) - Catalytic Converter Type: for vehicles with catalytic converter
- Construction Year from: 09.1983
- Connector Shape: rectangular
- Thread Size: M12
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.2
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Construction Year to: 09.1982
-
Thread Size: M 12x1,
5 - Manufacturer: FAE
-
Engine Code: M20 B20
(206EA) - Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
-
Engine Code: M20 B20
(206EA) - Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
-
Engine Code: M20 B20
(206EA) - Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Manufacturer: FACET
-
Engine Code: M20 B20
(206EA) - Catalytic Converter Type: for vehicles with catalytic converter
- Construction Year from: 09.1983
- Connector Shape: rectangular
- Operating Mode: Hydraulic
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Number of pins: 1
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: M20 B20
(206EA) - Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Corresponds to the original part in colour: blue
- Name: OLISURVELLITUS
- Manufacturer: EPS
-
Thread Size: M 12x1,
5 - Number of pins: 1
- Housing Colour: brown
- Manufacturer: FAE ELEKTRYKA
-
Engine Code: M20 B20
(206EA) - Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Corresponds to the original part in colour: blue
- Manufacturer: FACET
- Block Separation:
- Construction Year to: 09.1983
- Length [mm]: 46.7
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 24
- Number of connectors: 1
-
Surface: Zinc-
coated - Weight [kg]: 0.025
- Supplementary Article/Info 2: with seal ring
- Name: SW 20 23 0001
- Manufacturer: SWAG
Catalytic Converter Type: for vehicles without catalytic convertor, with three-way catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Block Separation:
- Construction Year to: 09.1983
- Length [mm]: 47
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 24
- Number of connectors: 1
-
Surface: Zinc-
coated - Weight [kg]: 0.025
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
Catalytic Converter Type: for vehicles without catalytic convertor, with three-way catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 07.1981
- Switch Pressure [bar]: 0.3
- Thread Size: M12x1.5
-
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET
-
Thread Size: M 12 x 1,
5 - Pressure [bar]: 0.3
- for OE number: NUC100350
- Manufacturer: MEAT&DORIA
- Pressure [bar]: 3.5
-
Housing Colour: red/
brown - Thread Size: M12x1.5
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
- Construction Year to: 09.1982
- Switch point to [bar]: 0.35
- Switch point from [bar]: 0.15
-
Thread Size: M12x1,
5 -
Control Range [bar]: 0,
2 - 0, 5 - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 07.1981
-
Thread Size: M12x1,
5 - Colour: brown
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 09.1983
-
Catalytic Converter Type: with three-
way catalytic converter - Number of pins: 1
- Pressure [bar]: 0.35
-
Thread Size: M 12 x 1,
5 - Colour: brown
- Version: Neue Version
- Manufacturer: METZGER
- Pressure [bar]: 0.35
-
Thread Size: M12 x 1,
5 - Number of pins: 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
Manufacturer: BOSCH KOMFORT/CZESCI ELEKTRYCZNE
- Construction Year from: 09.1982
- Tightening torque from [Nm]: 50
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 10
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
- Number of pins: 1
- Corresponds to the original part in colour: black
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6ZL003259121
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks