• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.05

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

Lisainfo: Sensor, brake lining wear, front

Lisainfo: Sensor, brake lining wear, rear

• for brake disc diameter [mm]: 332
• for brake disc thickness [mm]: 30
• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 365
• Inner Diameter [mm]: 120

• for brake disc diameter [mm]: 332
• for brake disc thickness [mm]: 30
• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 365
• Inner Diameter [mm]: 120

• Length [mm]: 15.5
• External Thread Size: M8 x 1,25
• Quality/ Grade: 10.9
• Spanner Size: 6
• Bolt Head-/Nut Design: Hexagon Socket
• Surface: Phosphatized
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.01
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M8 x 1,25
• Length [mm]: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Fitting Position: Front Axle both sides, Rear Axle both sides
• Quantity Unit: Set
• Quantity: 2
• Quality/ Grade: 8,8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-6
• Manufacturer: QUICK BRAKE
• Lisainfo: M8x1.25 16,0mm Hex-6 2tk
• Additional information: M8x1.25 16,0mm Hex-6 2tk

• Quantity per packing unit: 2
• Thread Size: M8 x 14
• Observe the vehicle manufacturer specifications:
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Brake System: Ate
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2483A
• Additional information: D42483A
• Lisainfo: D42483A

• Fitting Position: Rear Axle
• Brake System: Ate
• Manufacturer: ERT

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: QB 109-1201
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Brake Type: Disc Brake
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 794
• Fabrication Number: HCZ-BM-002
• Manufacturer: NTY

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Length [mm]: 712
• Fabrication Number: HCZ-BM-003
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Name: FR 901201
• Manufacturer: FRENKIT

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.032
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 800
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0201A

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity per packing unit: 2
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0295
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 715
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 800
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 800
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.033
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 790
• Supplementary Article/Supplementary Info: Axle Kit
• Name: QB WS0200A
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake System: ATE
• Length 1 [mm]: 800
• Brake Type: Disc Brake
• Name: DE LZ0158
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Length [mm]: 800
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.029
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 800
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.032
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Length [mm]: 715
• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.029
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 800
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Length [mm]: 715
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Length [mm]: 715
• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.029
• Manufacturer: SWAG
• Name: SW 20 91 8560

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 800
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.032
• Name: SW 20 91 8559
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 715
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 244

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 800
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 243

• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 1,220
• Brake Type: Disc Brake
• Weight [kg]: 0.435
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 715
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 794
• Manufacturer: ATE

• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 712
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 645
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 640
• MAPP code available:
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-BM-018
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-BM-013

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• for brake disc diameter [mm]: 324
• Manufacturer: KAMOKA

• for brake disc diameter [mm]: 324
• for brake disc thickness [mm]: 20
• Fitting Position: Rear Axle Right

• for brake disc diameter [mm]: 324
• for brake disc thickness [mm]: 20
• Fitting Position: Rear Axle Left

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-BM-015
• paired article number: HTO-BM-014
• Manufacturer: NTY
• Name: NTY HTO-BM-015

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-BM-014
• paired article number: HTO-BM-015
• Manufacturer: NTY
• Name: NTY HTO-BM-014

• Fitting Position: Rear Axle
• MAPP code available:
• Length [mm]: 655
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 332
• paired article number: 131-07-199
• Article number of recommended accessories: 231-03-200
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 332
• paired article number: 131-07-200
• Article number of recommended accessories: 231-03-200
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-BM-019
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 332
• Material: Sheet Steel
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Diameter 1 [mm]: 332
• Material: Sheet Steel
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Diameter [mm]: 332

• Fitting Position: Rear Axle, Left, Rear Axle Left
• Material: Sheet Steel
• for brake disc diameter [mm]: 324
• Name: CFD 610320
• Manufacturer: DACO

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-BM-012
• paired article number: HTO-BM-013
• Manufacturer: NTY
• Name: NTY HTO-BM-012

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-BM-013
• paired article number: HTO-BM-012
• Manufacturer: NTY
• Name: NTY HTO-BM-013

• Fitting Position: Front Axle Left
• paired article number: 57SKV193
• Weight [kg]: 0.6
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV192

• Fitting Position: Front Axle Right
• paired article number: 57SKV192
• Weight [kg]: 0.6
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV193

• Fitting Position: Front Axle Left
• Diameter [mm]: 332

• Fitting Position: Rear Axle, Right, Rear Axle Right
• Material: Sheet Steel
• for brake disc diameter [mm]: 324
• Name: CFD 610321
• Manufacturer: DACO

• Fitting Position: Rear Axle Left
• paired article number: V20-2793
• Material: Sheet Steel
• Surface: Zinc-coated
• Weight [kg]: 0.622
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• paired article number: 174926
• Fitting Position: Front Axle Right
• Weight [kg]: 0.546
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 174927
• Fitting Position: Front Axle Left
• Weight [kg]: 0.546
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Weight [kg]: 0.67
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 57SKV634
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Left
• Weight [kg]: 0.67
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 57SKV633
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 710
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 655
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Left, Front Axle, Front Axle Left
• Diameter 1/ Diameter 2 [mm]: 332
• Material: Sheet Steel
• Name: CFD 610323
• Manufacturer: DACO

• paired article number: 33 10 6980
• Fitting Position: Front Axle Right
• Weight [kg]: 0.546
• Name: SW 33 10 6979
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 33 10 6979
• Fitting Position: Front Axle Left
• Weight [kg]: 0.546
• Name: SW 33 10 6980
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 174965
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.62
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 174964
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.62
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Length [mm]: 800
• Braking/Drive Dynamics: for vehicles with ABS
• Number of pins: 2
• Rated Voltage [V]: 12
• Required quantity: 2
• Colour: blue, black
• Cable Length [mm]: 683
• Sensor Type: Hall Sensor, Active sensor
• Number of connectors: 2
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.062
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left
• paired article number: HCA-NS-084
• Fabrication Number: HCA-NS-085