Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Transmission Type: Automatic Transmission
- Length [mm]: 11
- External Thread Size: M10 x 1
- Quality/ Grade: 5.8
- Spanner Size: 5
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 8
- Weight [kg]: 0.006
- Lisainfo: 30 22 0003 SWA
- Additional information: 30 22 0003 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Rubber with fabric lining
- Cooling Hose: from throttle body to cylinder head
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 495
- Inner Diameter [mm]: 7
- Outer Diameter [mm]: 14
- Cooling Hose: from expansion tank to engine cooler
- Fitting Position: Upper Left
- Weight [kg]: 0.09
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper
- Colour: black
- Hose Length [mm]: 285
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 37.5
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
-
Additional information: 05-
2403 GATES -
Lisainfo: 05-
2403 GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Lower
- Colour: black
- Hose Length [mm]: 345
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 37.5
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
-
Additional information: 05-
2404 GATES -
Lisainfo: 05-
2404 GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Climate Zones: not for hot climate zones
-
not for country specific design: Australia,
South Africa, Japan - Length [mm]: 260
- Cooling Hose: from thermostat to radiator
- Fitting Position: Upper Left
- Name: Jahutusvoolik
- Manufacturer: MAX
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Rubber with fabric lining
- Cooling Hose: from coolant regulator housing to engine cooler
- Fitting Position: Lower
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Rubber with fabric lining
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 250
- Cooling Hose: from throttle body to cylinder head
- Weight [kg]: 0.11
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from thermostat to radiator
- Fitting Position: Lower Right
- Inner Diameter 1 [mm]: 42
- Inner Diameter 2 [mm]: 41
- Name: Jahutusvoolik
- Manufacturer: MAX
- Cooling Hose: from thermostat to radiator
- Fitting Position: Lower
- Weight [kg]: 0.241
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 250
- Weight [kg]: 0.11
- Manufacturer: VAICO
Cooling Hose: Engine to Valve, from throttle body to cylinder head Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Climate Zones: not for hot climate zones
-
not for country specific design: Australia,
South Africa, Japan - Length [mm]: 260
- Cooling Hose: from thermostat to radiator
- Fitting Position: Upper Left
- Weight [kg]: 0.18
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
- Additional information: FE37135
- Lisainfo: FE37135
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Climate Zones: not for hot climate zones
-
not for country specific design: Australia,
South Africa, Japan - Length [mm]: 260
- Cooling Hose: from thermostat to radiator
- Fitting Position: Upper Left
- Weight [kg]: 0.18
- Manufacturer: SWAG
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from thermostat to radiator
- Fitting Position: Lower Right
- Inner Diameter 1 [mm]: 41.5
- Weight [kg]: 0.235
- Inner Diameter 2 [mm]: 40.5
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from thermostat to radiator
- Fitting Position: Lower Right
- Inner Diameter 1 [mm]: 41.5
- Weight [kg]: 0.235
- Inner Diameter 2 [mm]: 40.5
- Manufacturer: SWAG
- Name: SW 20 92 7460
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Climate Zones: for hot climate zones
- Fitting Position: Upper
- Cooling Hose: from engine to engine cooler
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Climate Zones: for hot climate zones
-
Country Specific Design: Australia,
Japan - Length [mm]: 330
- Cooling Hose: from thermostat to radiator
- Fitting Position: Upper Left
- Weight [kg]: 0.24
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Climate Zones: for hot climate zones
-
Country Specific Design: Australia,
South Africa, Japan - Length [mm]: 320
- Cooling Hose: from thermostat to radiator
- Fitting Position: Lower Right
- Weight [kg]: 0.25
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 235
- Cooling Hose: from engine to heater valve
- Weight [kg]: 0.075
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower
- Cooling Hose: from engine to engine cooler
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from engine to engine cooler
- for OE number: 11531720720
- Fitting Position: Upper Left
- Weight [g]: 201
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Name: IM 221242
- Manufacturer: ORIGINAL IMPERIUM
- Climate Zones: for hot climate zones
- Fitting Position: Lower
- Cooling Hose: from engine to engine cooler
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper
- Cooling Hose: from engine to engine cooler
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)