Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)

- Fitting Position: Rear Axle
- Pidurisüsteem: ATE
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2387A - Additional information: D42387A AUT
- Lisainfo: D42387A AUT

- Fitting Position: Rear Axle
- Pidurisüsteem: ATE

- Installatsiooni pool: Tagasild
- Pidurisüsteem: ATE
- Manufacturer: JP GROUP
-
Lisainfo: Accessory Kit,
disc brake pads -
Additional information: Accessory Kit,
disc brake pads

- Installatsiooni pool: Esisild
- Pidurisüsteem: ATE
-
Lisainfo: Accessory Kit,
disc brake pads -
Additional information: Accessory Kit,
disc brake pads

- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Pikkus (mm): 16
-
Keermemõõt: M8x1,
25 - Pöördeliik: koos väliskeermega
-
Võtmekaugus: Hex-
6 -
Name: Kruvi,
piduriketas - Manufacturer: QBK
-
Lisainfo: M8x1.25 16,
0mm Hex- 6 2tk -
Additional information: M8x1.25 16,
0mm Hex- 6 2tk

Lisainfo: Sensor, brake lining wear, rear

-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Anduritüüp: Induktiivandur
-
Manufacturer: JP-
GROUP -
Lisainfo: ABS sensor,
rear, left/ right -
Additional information: ABS sensor,
rear, left/ right

- Fitting Position: Front Axle
- Brake System: ATE
- Manufacturer: PROFIPOWER

-
Thread Size: M8 x 1,
25 - Length [mm]: 15
- Bolt Head-/Nut Design: Hexagon Socket
-
Fitting Position: Front Axle both sides,
Rear Axle both sides - Quantity Unit: Set
- Quantity: 2
-
Quality/ Grade: 8,
8 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: PROFIPOWER

- Brake Type: Disc Brake
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.01
- Length [mm]: 220
- Manufacturer: 3RG

- Fitting Position: Rear Axle
- Pidurisüsteem: ATE
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: MAX

- Fitting Position: Rear Axle
- Brake System: ATE
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK

- Brake System: ATE
- Installatsiooni pool: Esisild
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: MAX

- Fitting Position: Front Axle
- Brake System: ATE
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK

- Installatsiooni pool: Esisild
- Pidurisüsteem: ATE
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2558A

- Installatsiooni pool: Tagasild
- Pidurisüsteem: ATE
-
Kaal (kg): 0,
04 - Manufacturer: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Fitting Position: Front Axle
- Quantity per packing unit: 2
-
Pikkus (mm): 15,
7 -
Keermemõõt: M8X1,
25 - Materjal: Metall
-
Pealispind: Kroom-
(VI)- vaba passiveerimine - Kruvipea-/Mutriprofiil: sisekuuskant
- ka universaaltootena saadav vaata toode-nr.: TPM1000
-
Name: Kruvi,
piduriketas - Manufacturer: TEX

- Fitting Position: Rear Axle
- Pidurisüsteem: ATE
-
Kaal (kg): 0,
04 - Manufacturer: ABS

- Fitting Position: Rear Axle
- Brake System: ATE
- Quantity per packing unit: 2
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LX0136
- Quality class: PJ
Additional information: "Tootja: DELPHI
BMW E36/E34/E32/M5
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
BMW E36/E34/E32/M5
(kvaliteediklass: PJ)"

- Fitting Position: Front Axle
- Pidurisüsteem: ATE
-
Kaal (kg): 0,
06 - Manufacturer: ABS

- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer Restriction: ATE
-
Netokaal [kg]: 0,
04 -
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: NK

- Fitting Position: Rear Axle
- Brake System: ATE
- Quality class: PJ
- Name: Brake pads fitting kit

- Installatsiooni pool: Tagasild
- Pidurisüsteem: Teves
-
Kaal (kg): 0,
043 - Manufacturer: TOMEX C

- Installatsiooni pool: Tagasild
- Pikkus (mm): 790
- Piduriliik: Ketaspidur
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Fitting Position: Rear Axle
- Pikkus (mm): 790
- Piduriliik: Ketaspidur
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MAX

- Fitting Position: Front Axle
- Brake System: ATE
- Quantity per packing unit: 2
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LX0135
- Quality class: PJ
Additional information: "Tootja: DELPHI
7 (E32), 09.86-09.94
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
7 (E32), 09.86-09.94
(kvaliteediklass: PJ)"

- Piduriliik: Ketaspidur
- Installatsiooni pool: Tagasild
- Hoiatuskontakti pikkus (mm): 790
- vajaminev tükihulk: 1
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MEY

- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Pikkus (mm): 790
- Piirangutega toode/piirangu info: Sillakomplekt
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: QBK

- Installatsiooni pool: Esisild
-
Pidurisüsteem: ATE
(Teves) - Manufacturer: FRENKIT
- Name: FR 901096

- Fitting Position: Front Axle
- Brake System: ATE
- Quality class: PJ
- Name: Brake pads fitting kit

-
Fitting Position: Front Axle Left,
Front Axle Right - Braking/Driving Dynamics: for vehicles with ABS
- Piduriliik: Ketaspidur
- Pikkus (mm): 810
-
Kaal (kg): 0,
03 - Kulumisnäidikute arv [ühe telje kohta]: 1
- Manufacturer: ABS

- Fitting Position: Rear Axle
- Brake System: ATE
- Pikkus 1 [mm]: 790
- Piduriliik: Ketaspidur
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LZ0119

- Fitting Position: Rear Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 790
- Kulumisnäidikute arv [ühe telje kohta]: 1
- Name: BR A 00 218
- Manufacturer: BREMBO

- Fitting Position: Front Axle
- Brake System: ATE
- Pikkus 1 [mm]: 800
- Piduriliik: Ketaspidur
- Name: DE LZ0134
- Manufacturer: DELPHI
- Quality class: PJ
Additional information: "Tootja: DELPHI
3 KABRIOLET (E36), 0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
3 KABRIOLET (E36), 0
(kvaliteediklass: PJ)"

- Pikkus (mm): 790
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Piduriliik: Ketaspidur
-
Kaal (kg): 0,
01 - Name: SW 99 90 6867
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Pikkus (mm): 810
- Piirangutega toode/piirangu info: Sillakomplekt
- Manufacturer: QUICK BRAKE
- Name: QB WS0152A

- Installatsiooni pool: Esisild
- Pidurisüsteem: Teves
-
Kaal (kg): 0,
054 - Manufacturer: TOMEX C

- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: BOSCH

-
Fitting Position: Rear Axle Left,
Rear Axle Right - Braking/Driving Dynamics: for vehicles with ABS
- Piduriliik: Ketaspidur
- Pikkus (mm): 790
-
Kaal (kg): 0,
02 - Kulumisnäidikute arv [ühe telje kohta]: 1
- Manufacturer: ABS

- Fitting Position: Rear Axle
- Pikkus (mm): 790
- Piduriliik: Ketaspidur
- Manufacturer: BOSCH UK£ADY HAMULCOWE

- Fitting Position: Front Axle
- Pikkus (mm): 810
- Piduriliik: Ketaspidur
- Manufacturer: BOSCH HAMULCE

- Installatsiooni pool: Tagasild
- Piduriliik: Ketaspidur
- Pikkus (mm): 790
-
Kaal (kg): 0,
019 - Hoiatuskontakti pikkus (mm): 790
- Manufacturer: TOMEX C

- Fitting Position: Rear Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 790
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator

- Pikkus (mm): 790
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Piduriliik: Ketaspidur
-
Kaal (kg): 0,
01 - Manufacturer: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Pikkus (mm): 810
- Ühenduste arv: 2
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Piduriliik: Ketaspidur
-
Kaal (kg): 0,
03 - Name: SW 20 93 6032
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Fitting Position: Rear Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 790
- pakendi pikkus [cm]: 26
- pakendi laius [cm]: 15
- pakendi kõrgus [cm]: 1
-
Kaal (kg): 0,
022 -
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: TEX

- Quantity per packing unit: 20
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Length [mm]: 790
- Supplementary Article/Info 2: with protection hose
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- Fitting Position: Front Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 800
- Tootja piirang: ATE
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! -
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: TRW
- Quality class: Q

- Fitting Position: Front Axle
- Brake System: ATE
- Manufacturer: METZGER

- Fitting Position: Front Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 810
- pakendi pikkus [cm]: 26
- pakendi laius [cm]: 15
- pakendi kõrgus [cm]: 1
-
Kaal (kg): 0,
025 - Manufacturer: TEXTAR

- Fitting Position: Front Axle
- Brake System: ATE
- Manufacturer: BOSCH

- Required quantity: 1
- Fitting Position: Rear Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 790
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE

-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Seerianumber: HCA-
BM- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Fitting Position: Rear Axle Right
- paired article number: FT00147
- Manufacturer: FAST
General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

- Fitting Position: Rear Axle Left
- paired article number: FT00148
- Manufacturer: FAST
General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Seerianumber: HCA-
BM- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Anduritüüp: passiivne andur
- pikkus üle kõige (mm): 715
- Installatsiooni pool: Esisild
- Manufacturer: KAMOKA UK£ADY HAMULCOWE

- Installatsiooni pool: Tagasild
- Kaablipikkus (mm): 810
- Pistikkontaktide arv: 2
- Anduritüüp: Induktiivandur
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: ABAKUS LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Fitting Position: Rear Axle
- Colour: grey
- Sensor Type: Passive sensor
- Length [mm]: 780
- Manufacturer: JPN

- Anduritüüp: passiivne andur
- vajaminev tükihulk: 2
- Kaablipikkus (mm): 810
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX

- Installatsiooni pool: Esisild
- Anduritüüp: passiivne andur
- Piirangutega toode/piirangu info 2: koos kaabliga
- pikkus üle kõige (mm): 750
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX

- Required quantity: 2
- Fitting Position: Front Axle
- Length [mm]: 560
- Manufacturer: DENCKERMANN FILTRY

-
Installatsiooni pool: esisild vasakul,
esisild paremal - Anduritüüp: Induktiivandur
- Pikkus (mm): 560
-
Lisainfo: ABS sensor,
front, left/ right -
Additional information: ABS sensor,
front, left/ right

- Fitting Position: Rear Axle
- Anduritüüp: passiivne andur
- kasutatud klemmide arv: 2
- Kaablipikkus (mm): 700
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Quality class: PJ

- Fitting Position: Front Axle
- Length [mm]: 660
- Number of pins: 3
- Connector Shape: round
- Voltage [V]: 12
- Weight [kg]: 0.12
- Colour: grey
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY

- Fitting Position: Rear Axle
- Length [mm]: 655
- Number of pins: 2
- Connector Shape: round
- Voltage [V]: 12
- Weight [kg]: 0.09
- Colour: grey
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY

-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH

- Anduritüüp: passiivne andur
- Kaablipikkus (mm): 780
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY

- Installatsiooni pool: Esisild
- Kaablipikkus (mm): 720
- Pistikkontaktide arv: 3
- Anduritüüp: Induktiivandur
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: ABAKUS LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Nominaalpinge (V): 12
- Piirangutega toode/piirangu info 2: koos kaabliga
- Pikkus (mm): 810
- vajaminev tükihulk: 2
- Takistus [oom]: 1 100
- Värv: hall
- Kaablipikkus (mm): 780
- Anduritüüp: Induktiivandur
- Pistikkontaktide arv: 2
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Piirangutega toode/piirangu info 2: koos kaabliga
- Pikkus (mm): 830
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

-
paaris tootenumbrid: 19-
3589 - Installatsiooni pool: esisild vasakul
-
Name: Plekk,
piduriketas - Manufacturer: MAX

-
paaris tootenumbrid: 19-
3588 - Installatsiooni pool: esisild paremal
-
Name: Plekk,
piduriketas - Manufacturer: MAX

- Installatsiooni pool: esisild paremal
-
Seerianumber: HTO-
BM- 019 -
paaris tootenumbrid: HTO-
BM- 018 -
Name: NTY HTO-
BM- 019 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Installatsiooni pool: esisild vasakul
-
Seerianumber: HTO-
BM- 018 -
paaris tootenumbrid: HTO-
BM- 019 - Manufacturer: NTY
-
Name: NTY HTO-
BM- 018
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Installatsiooni pool: Tagasild
- Pikkus (mm): 655
- Pistikkontaktide arv: 2
- Pistikukatte kuju: ümar
- Garantii: 3 aastat garantii
- Pinge [V]: 12
-
Kaal (kg): 0,
09 - Värv: hall
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 06SKV032

- Installatsiooni pool: esisild vasakul
- Värv: must
- Välisläbimõõt [mm]: 310
- Siseläbimõõt [mm]: 100
-
paaris tootenumbrid: 131-
07- 108 -
soovitava lisavarustuse artiklinumber: 231-
03- 211 - Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: ABAKUS
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Installatsiooni pool: esisild paremal
- Värv: must
- Välisläbimõõt [mm]: 310
- Siseläbimõõt [mm]: 100
-
paaris tootenumbrid: 131-
07- 107 -
soovitava lisavarustuse artiklinumber: 231-
03- 211 - Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: ABAKUS
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Installatsiooni pool: esisild vasakul
- Välisläbimõõt [mm]: 310
- Siseläbimõõt [mm]: 100
- Manufacturer: JP GROUP
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc

- Installatsiooni pool: esisild paremal
- Välisläbimõõt [mm]: 310
- Siseläbimõõt [mm]: 100
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc

- OE-numbri jaoks: 34 52 1 182 067
- Installatsiooni pool: Tagasild mõlemapoolselt
- Manufacturer: TRUCKTEC

- Installatsiooni pool: Esisild
- Pikkus (mm): 660
- Pistikkontaktide arv: 3
- Pistikukatte kuju: ümar
- Garantii: 3 aastat garantii
- Pinge [V]: 12
-
Kaal (kg): 0,
12 - Värv: hall
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY

- Pikkus (mm): 750
- Ühenduste arv: 3
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
081 -
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Pistikkontaktide arv: 2
- Pistikukatte kuju: ümar
- pikkus üle kõige (mm): 810
- Anduritüüp: Induktiivandur
-
Installatsiooni sügavus (mm): 22,
5 -
Installatsiooni pool: Tagasild paremal,
Tagasild vasakul - OE-numbri jaoks: 34521182063
- Manufacturer: MEAT&DORIA

- Installatsiooni pool: esisild paremal
- Materjal: Raudplekk
- paaris tootenumbrid: 503 002
- Manufacturer: TOPRAN HANS PRIES
Pealispind: Must, värvitud, KTL-kattega (katoodne sukelduskatmine) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

- Pikkus (mm): 750
- Ühenduste arv: 3
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
081 - Name: SW 20 92 3399
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Pistikkontaktide arv: 3
- Pistikukatte kuju: ümar
- Kaablipikkus (mm): 590
- pikkus üle kõige (mm): 660
- Anduritüüp: Induktiivandur
- Installatsiooni sügavus (mm): 49
-
Installatsiooni pool: esisild paremal,
esisild vasakul - OE-numbri jaoks: 34521163027
- Manufacturer: MEAT&DORIA

- Fitting Position: Front Axle
- Kaablipikkus (mm): 565
- Anduritüüp: passiivne andur
- Manufacturer: OPTIMAL ZAWIESZENIE

- Kaablipikkus (mm): 790
- Anduritüüp: Induktiivandur
- Pistikkontaktide arv: 2
- Vastab originaalosa värvile: hall
- Installatsiooni pool: Tagasild
- Manufacturer: FAE

- Required quantity: 2
- Fitting Position: Rear Axle
- Piirangutega toode/piirangu info 2: koos kaabliga
- Manufacturer: BREMI

- paaris tootenumbrid: 171543
- Installatsiooni pool: esisild paremal
-
Kaal (kg): 0,
471 - Hooldusinfot jälgida:
-
Name: Plekk,
piduriketas - Manufacturer: FEB
- Additional information: FE171542
- Lisainfo: FE171542
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Installatsiooni pool: esisild paremal
- pidurikettaläbimõõdule (mm): 286
- Materjal: Metall
- paaris tootenumbrid: 8125 11113
- Pealispind: Krundeeritud keemiliselt
-
Name: Plekk,
piduriketas - Manufacturer: TRI

- Fitting Position: Front Axle Right
- Manufacturer: YSPARTS

- Installatsiooni pool: esisild vasakul
- pidurikettaläbimõõdule (mm): 286
- Materjal: Metall
- paaris tootenumbrid: 8125 11114
- Pealispind: Krundeeritud keemiliselt
-
Name: Plekk,
piduriketas - Manufacturer: TRI

- Required quantity: 2
-
Engine Code: S50 B30
(306S1) -
Fitting Position: Rear Axle Left,
Rear Axle Right - Number of pins: 2
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- paaris tootenumbrid: 171542
- Installatsiooni pool: esisild vasakul
-
Kaal (kg): 0,
474 - Hooldusinfot jälgida:
-
Name: Plekk,
piduriketas - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Installatsiooni pool: esisild vasakul
- Materjal: Raudplekk
- paaris tootenumbrid: 503 003
- Manufacturer: TOPRAN
Pealispind: Must, värvitud, KTL-kattega (katoodne sukelduskatmine) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

- paaris tootenumbrid: 231534
- Installatsiooni pool: esisild vasakul
-
Netokaal [kg]: 0,
5 -
Name: Plekk,
piduriketas - Manufacturer: NK

- Installatsiooni pool: esisild paremal
- Garantii: 3 aastat garantii
- paaris tootenumbrid: 57SKV125
-
Kaal (kg): 0,
53 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 57SKV126

- Installatsiooni pool: esisild vasakul
- Garantii: 3 aastat garantii
- paaris tootenumbrid: 57SKV126
-
Kaal (kg): 0,
53 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 57SKV125

- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Takistus [oom]: 1 120
- Kaablipikkus (mm): 555
- Anduritüüp: Induktiivandur
- Installatsiooni pool: Esisild
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: HELLA
- Name: HE 6PU010039361
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Fitting Position: Front Axle Right
- Materjal: Raudplekk
- paaris tootenumbrid: 11277
-
Kaal (kg): 0,
47 - Manufacturer: ABS

- Pikkus (mm): 810
- Ühenduste arv: 2
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Kaal (kg): 0,
068 - Manufacturer: FEBI BILSTEIN JR.
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Kaablipikkus (mm): 750
- Pistikkontaktide arv: 2
-
Installatsiooni sügavus (mm): 22,
5 - Manufacturer: ERA

- Pikkus (mm): 810
- Ühenduste arv: 2
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Kaal (kg): 0,
068 - Name: SW 20 92 4125
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Fitting Position: Rear Axle
- pikkus üle kõige (mm): 832
- Pikkus (mm): 22
- Anduritüüp: passiivne andur
- Pistiku värv: hall
- Kaablipikkus (mm): 720
- paaris tootenumbrid: 30041
-
Kaal (kg): 0,
07 - Manufacturer: ABS

-
Installatsiooni pool: Tagasild paremal,
Tagasild vasakul - Kaablipikkus (mm): 687
- Pistikkontaktide arv: 2
- Anduritüüp: passiivne andur
- Manufacturer: AUTOFREN SEINSA

- Fitting Position: Front Axle
- Anduritüüp: passiivne andur
- Piirangutega toode/piirangu info 2: koos kaabliga
- pikkus üle kõige (mm): 715
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Manufacturer: BOSCH UK£ADY HAMULCOWE

- Fitting Position: Rear Axle
- Anduritüüp: passiivne andur
- Piirangutega toode/piirangu info 2: koos kaabliga
- pikkus üle kõige (mm): 805
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: BOS

-
Fitting Position: Right,
Front Axle - Kaablipikkus (mm): 660
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN ASB150.07

- Fitting Position: Front Axle
- pikkus üle kõige (mm): 760
- Pikkus (mm): 48
- Anduritüüp: passiivne andur
- Pistiku värv: hall
- Kaablipikkus (mm): 610
- paaris tootenumbrid: 30038
-
Kaal (kg): 0,
09 - Manufacturer: ABS

- Required quantity: 2
- Pinge [V]: 12
- Installatsiooni pool: Tagasild
- Kaablipikkus (mm): 805
- Anduritüüp: passiivne andur
- Pistikkontaktide arv: 2
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 6PU012039681
- Manufacturer: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Required quantity: 2
- Fitting Position: Front Axle
- Pikkus (mm): 560
- MAPP-code olemas:
- Manufacturer: ATE

- Fitting Position: Front Axle
- Required quantity: 2
- Kaablipikkus (mm): 560
- Värv: hall
- Pistikkontaktide arv: 3
- Manufacturer: VDO