Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: M54
- Fitting Position: Rear Axle Middle
- Inner Diameter [mm]: 46
-
Thickness [mm]: 13,
9 - Outer Diameter [mm]: 65
- Weight [kg]: 0.03
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thickness [mm]: 9,
13 - Inner Diameter [mm]: 45
- Outer Diameter [mm]: 65
-
Material: ACM
(Polyacrylate) - Fitting Position: Rear Axle
- Weight [kg]: 0.028
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: FEB
- Additional information: FE12619
- Lisainfo: FE12619
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Inner Diameter 1 [mm]: 44
- Outer Diameter 1 [mm]: 78.1
- Height 1 [mm]: 10
- Height 2 [mm]: 15.5
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Supplementary Article/Info 2: with mounting sleeves
- Version: Seal only
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
-
Fitting Position: Rear Axle,
Outlet, both sides - Axle Gear ID: TYP 188
- Version: ONLY SEAL
- Inner Diameter 1 [mm]: 44
- Outer Diameter 1 [mm]: 90.1
- Height 1 [mm]: 10
- Height 2 [mm]: 15.5
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
- Fitting Position: Rear Axle
- Inner Diameter 1 [mm]: 45
- Outer Diameter 1 [mm]: 65
- Height 1 [mm]: 10
- Height 2 [mm]: 14
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
-
Fitting Position: Rear Axle,
Drive Axle - Inner Diameter 1 [mm]: 45
- Outer Diameter 1 [mm]: 75
- Height 1 [mm]: 10
- Height 2 [mm]: 14
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
-
Fitting Position: Rear Axle,
both sides - Quantity: 2
- Transmission Type: Manual Transmission
-
Material: ACM
(Polyacrylate) - Inner Diameter [mm]: 44
- Outer Diameter [mm]: 90
- Height [mm]: 10
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: REI
- Thickness [mm]: 60
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 68
-
Material: Rubber/
Metal -
Fitting Position: Left,
Rear - Mounting Type: Hydro Mount
- Weight [kg]: 0.491
-
Name: KINNITUS,
DIFERENTSIAAL - Manufacturer: FEB
- Additional information: FE29367
- Lisainfo: FE29367
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 60
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 68
-
Material: Rubber/
Metal -
Fitting Position: Left,
Rear - Mounting Type: Hydro Mount
- Weight [kg]: 0.491
- Manufacturer: SWAG
- Name: SW 20 92 9367
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Required quantity: 2
-
Material: PU
(Polyurethane) -
Name: Kinnitus,
diferentsiaal - Manufacturer: TED
-
Fitting Position: Rear Axle,
Left Rear, inner -
Mounting Type: Rubber-
Metal Mount -
Material: Rubber/
Metal - Required quantity: 1
- Manufacturer: TEDGUM
- Name: TG 00082043
- Fitting Position: Rear
- Weight [kg]: 0.238
- Packaging length [cm]: 9.2
- Packaging width [cm]: 9.2
- Packaging height [cm]: 3.5
- Manufacturer: FEBEST
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks