• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: B57 D30 A
• Required quantity: 1
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: B57 D30 A
• Thread Size: M12x1,5
• Manufacturer: FACET

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B57 D30 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Quantity: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B57 D30 A
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: B57 D30 A
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: B57 D30 A
• Required quantity: 1
• Manufacturer: FACET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

Manufacturer: VERNET

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 50
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA POWIETRZA BMW 114D, X7 XDRIVE 30D 10-

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Number of pins: 3
• Supplementary Article/Info 2: without connection line
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Suction pipe connector diameter [mm]: 7.8
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Exhaust System: before exhaust gas recirculation
• Manufacturer: NRF

• Number of pins: 3
• Opening pressure [kPa]: 5
• Name: CZUJNIK CI—N. SPALIN BMW 116D, X7 XDRIVE M50D 14-
• Manufacturer: DLP

• Exhaust System: before soot particulate filter
• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 114D, 320I, X3 XDRIVE 20D 09-

• Fabrication Number: ECS-BM-004
• Manufacturer: NTY

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: B57 D30 A
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur,ohuvotu rohk
• Manufacturer: EPS

• Number of connectors: 3
• Fabrication Number: ECS-BM-008
• Manufacturer: NTY

• Engine Code: B57 D30 A
• Required quantity: 1
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Engine Code: B57 D30 A
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Manufacturer: FACET

• Exhaust System: before soot particulate filter
• for OE number: 13628570686
• Manufacturer: NRF

• Engine Code: B57 D30 A
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366149

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 305
• Overall Length [mm]: 455
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Fabrication Number: EGT-BM-023
• Cable Length [mm]: 597
• Number of pins: 2
• Sensor Type: NTC Sensor
• for OE number: 13628507629
• Manufacturer: NTY

• Fitting Position: EGR Valve
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

• Fitting Position: Particulate Filter
• Required quantity: 1
• Thread Size: M12x1.25
• Cable Length [mm]: 332
• Number of pins: 2
• for OE number: 13628570234
• Quality: OE
• Sensor Type: NTC Sensor
• Weight [g]: 35
• Gross Weight [g]: 63
• Manufacturer: DENSO

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fabrication Number: EGT-BM-020
• Exhaust System: for soot particulate filter
• Number of pins: 2
• Sensor Type: Closed-type Sensor
• Cable Length [mm]: 216
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Broadband Oxygen Sensor, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 511
• Manufacturer: DELPHI ELEKTRONIKA

• Exhaust System: before soot particulate filter
• Quantity: 1
• Cable Length [mm]: 310
• Number of pins: 2
• Name: DE TS30368-12B1
• Manufacturer: DELPHI

• Supplementary Article/Info 2: High Pressure Side
• Required quantity: 1
• Fitting Position: after EGR cooler
• Overall Length [mm]: 465
• Cable Length 1 [mm]: 375
• Spanner Size: 14
• Thread Size: M10x1,25
• Fitting Depth [mm]: 16
• Number of pins: 2
• Socket colour: black
• Form 1: straight
• Sensor Type: PTC
• Voltage [V]: 5
• Temperature range from [°C]: -40
• Temperature range to [°C]: 999
• Manufacturer: BREMI

• Fitting Position: after soot particulate filter
• Overall Length [mm]: 453
• Cable Length [mm]: 310
• Fitting Depth [mm]: 59
• Connector Shape: D Shape
• Connecting thread: M12x1.25-6e
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Overall Length [mm]: 660
• Manufacturer: BOSCH

• Fabrication Number: EPP-BM-038
• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 4
• Recommended additional repairs: Air Filter
• Connector Shape: oval
• Manufacturer: NTY

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• Engine Code: B57 D30 A
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIE

Name: PRZEPYWOMIERZ POWIETRZA BMW 2, 3, 5, 7 1,5-3,0 14-

• Name: Tahkete osakeste sensor
• Manufacturer: BOS

• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Engine Code: B57 D30 A
• Block Separation:
• Cable Length [mm]: 1,055
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Name: DE ANS1044-12B1
• Manufacturer: DELPHI

Fitting Position: after soot particulate filter, Upper, before catalytic converter, Lower

• Name: NOx-sensor, karbamiidipritse
• Manufacturer: BOS

• not for emission standard: Euro 3, Euro 5
• not for special equipment code: S169A, S161A
• Block Separation:
• Length [mm]: 1,040
• Number of connectors: 5
• Manufacturer: METZGER

Fitting Position: before SCR catalytic converter, after SCR catalytic converter

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring