• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 295
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Oxygen Sensor: Regulating Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: after catalytic converter
• Number of circuits: 4
• Switch Point [°C]: 98
• Cable Length [mm]: 1,000
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Length [mm]: 990
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-BM-005
• Manufacturer: NTY
• Name: NTY ESL-BM-005

Fitting Position: Left Front, Right Front, before catalytic converter

• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Length [mm]: 320
• Fabrication Number: ESL-BM-008
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased

• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Length [mm]: 990
• Fabrication Number: ESL-BM-002
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased

• Length [mm]: 955
• Fabrication Number: ESL-BM-004
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Sensor
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Engine Code: M52 B28 (286S1)
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Construction Year from: 09.1998
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 990
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 10.1998
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Sensor
• Manufacturer: JAPKO

• Engine Code: M52 B28 (286S1)
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Construction Year from: 09.1998
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 320
• Number of pins: 4
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Regulating Sensor, Finger-type Sensor, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Engine Code: M52 B28 (286S1)
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES10983-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Construction Year from: 09.1998
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Regulating Sensor, Finger-type Sensor, Heated
• Engine Code: M52 B28 (286S1)
• Cable Length [mm]: 990
• Manufacturer: DELPHI
• Name: DE ES10857-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Construction Year from: 10.1998
• Voltage [V]: 12
• Length [mm]: 430
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV080

• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 300
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 300
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM013

• Construction Year from: 10.1998
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 990
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.18
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV665

• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 350
• Weight [kg]: 0.088
• Name: SW 33 10 3193
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.1998
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 350
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 2.1
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 990
• Cable Length [mm]: 990
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM079

• Fitting Position: Rear, before catalytic converter
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,020
• Weight [kg]: 0.134
• Name: SW 33 10 4013
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 295
• Number of pins: 4
• Oxygen Sensor: Heated
• Voltage [V]: 12
• Thread Size: M18 x 1,5
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 09.1998
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

Fitting Position: before catalytic converter, after catalytic converter, Left, Right Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Fitting Position: Rear, before catalytic converter
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,020
• Weight [kg]: 0.134
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Conductor Number: 4
• Length [mm]: 300
• Number of circuits: 4
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Construction Year from: 09.1998
• Length [mm]: 350
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Oxygen Sensor: Diagnostic Probe, Heated
• Block Separation:
• Required quantity: 2
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Cable Length [mm]: 1,030
• Weight [kg]: 0.138
• Name: SW 33 10 4117
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe
• Construction Year from: 09.1998
• Length [mm]: 1,020
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Right
• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Length [mm]: 800
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year from: 09.1998
• Engine Code: M52B28
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,020
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 09.1998
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 320
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258003477

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 800
• Number of circuits: 4
• Manufacturer: ERA

• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,020
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Name: VA 368214
• Manufacturer: VALEO

• Construction Year from: 09.1998
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258005109

• Construction Year from: 09.1998
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Right
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 765
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258003561
• Lisainfo: 0258003561 BOSCH
• Additional information: 0258003561 BOSCH

• Construction Year from: 09.1998
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 580
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 09.1998
• Fitting Position: Left, before catalytic converter, Right
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Oxygen Sensor: Regulating Sensor
• Block Separation:
• Length [mm]: 980
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 09.1998
• Fitting Position: Left, before catalytic converter, Right
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Regulating Sensor
• Block Separation:
• Length [mm]: 350
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 09.1998
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year to: 09.1998
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 970
• Number of pins: 4
• Technical Information Number: Universal 77013
• Manufacturer: FAE

• Oxygen Sensor: Heated
• Number of pins: 4
• Connector Shape: round
• Cable Length [mm]: 860
• for OE number: MHK000220
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.1998
• Transmission Type: Manual Transmission, Automatic Transmission
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Manufacturer Restriction: 4-adrig
• Cable Length [mm]: 990
• Thread Size: M 18x1,5
• Manufacturer: METZGER