• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, rear
• Additional information: Bearing for strut, rear

• Construction Year from: 05.1997
• Seal Material: Paper
• Fitting Position: Rear Axle Right, Rear Axle Left
• Weight [kg]: 0.001
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 100
• Fitting Position: Rear Axle
• Manufacturer: ELRING

• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 30.8
• Manufacturer: GSP

• Construction Year from: 05.1997
• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.1997
• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 05.1997
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Weight [kg]: 0.2
• Name: COC 21653085
• Manufacturer: CORTECO

• Quantity per packing unit: 2
• Fitting Position: Upper
• Weight [kg]: 0.25
• Weight [g]: 250
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: AD-BM-000
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Manufacturer: KAVO PARTS

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Required quantity: 1
• Weight [g]: 242
• Name: IM 30809
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• SVHC: No SVHC present!
• Name: LU 814016910
• Manufacturer: FAG

• Quantity per packing unit: 2
• Quantity Unit: Set
• Fitting Position: Rear Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Suspension strut support bearing left=right

• Construction Year from: 05.1997
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.228
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: SACHS
• Name: SHS 802003

for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right
• for OE number: 33 52 1 092 362 S1
• Manufacturer: GSP

• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER
• Name: LMI 1066901

for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Technical Information: Suspension mounting only (no bearing), cup (x1)
• Manufacturer: KYB
• Name: KY SM9000

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 05.1997
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Weight [kg]: 0.22
• Manufacturer: CORTECO
• Name: COC 80001464

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year from: 05.1997
• Seal Material: Paper
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.24
• Supplementary Article/Info 2: without ball bearing, with fastening material
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Manufacturer: ASHIKA

Suspension: for vehicles without sports suspension, for vehicles without M technology

• Construction Year from: 05.1997
• Seal Material: Paper
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.24
• Supplementary Article/Info 2: with fastening material, without ball bearing
• Name: SW 20 55 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

Suspension: for vehicles without sports suspension, for vehicles without M technology

• Material: Rubber/Metal
• Supplementary Article/Supplementary Info: with gasket/seal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Vehicle configuration line / variant: (+/-) M-Technik
• Supplementary Article/Info 2: without bearing
• Guarantee: 5 years guarantee
• Weight [kg]: 0.3
• Packaging length [cm]: 14
• Packaging width [cm]: 4.4
• Packaging height [cm]: 14.5
• Manufacturer: MONROE

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: BILSTEIN
• Name: BI 12-117109
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Quantity per axle: 2
• Alternatively:
• Supplementary Article/Supplementary Info: with gasket/seal, Rolling Bearing is not required
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: LMI 3108601
• Manufacturer: LEMFÖRDER

for OE number: 1 092 362, 1 123 351, 1 125 554, 1 128 734, 1 128 819, 1 137 972, 33 52 1 092 362, 33 52 1 123 351, 33 52 1 125 554, 33 52 1 128 734, 33 52 1 128 819, 33 52 1 137 972, 33 52 6 772 864, 6 772 864 SVHC: No information available, please contact the manufacturer!

• Width 1 [mm]: 33
• Number of Parts [parts]: 3
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN KB950.00

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, with bearing, front
• Additional information: Bearing for strut, with bearing, front

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 814003110
• Manufacturer: FAG

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BGA

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP ZAWIESZENIE

• new version:
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.39
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• old version:
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.67
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Observe service information:
• Weight [kg]: 0.67
• Material: Cast Steel
• Supplementary Article/Info 2: with rolling bearing
• Manufacturer: METALCAUCHO

• new version:
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.39
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Name: SW 20 92 4316
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• old version:
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.67
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Name: SW 20 54 0002
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Observe service information:
• Manufacturer: SACHS

for OE number: 1 090 467, 1 092 885, 1 135 582, 31 33 1 090 467, 31 33 1 092 885, 31 33 1 135 582, 31 33 6 764 947, 31 33 6 769 585, 31 33 6 779 613, 31 33 6 795 871, 6 764 947, 6 769 585, 6 779 613, 6 795 871 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer: KYB
• Name: KY SM1001

Suspension: for vehicles without M technology, for vehicles without sports suspension Technical Information: Suspension mounting w/ integrated suspension bearing / / / Fastenings : suspension mounting nut (x3), suspension mounting washer (x3)

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Weight [kg]: 0.67
• Manufacturer: CORTECO
• Name: COC 21653086

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Observe service information:
• Manufacturer: LEMFORDER
• Name: LMI 2730901

for OE number: 1 090 467, 1 092 885, 1 135 582, 31 33 1 090 467, 31 33 1 092 885, 31 33 1 135 582, 31 33 6 764 947, 31 33 6 769 585, 31 33 6 779 613, 31 33 6 795 871, 6 764 947, 6 769 585, 6 779 613, 6 795 871 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Material: Aluminium
• Manufacturer: CORTECO
• Name: COC 80001284

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: SK VKDC35802
• Manufacturer: SKF

• Fitting Position: Right, Left, Front Axle
• Supplementary Article/Info 2: with rolling bearing, with rubber mount
• Number of Parts [parts]: 7
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Name: SN KB650.01
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BILSTEIN
• Quality class: Q
• Name: Suspension strut support bearing left=right

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Vehicle configuration line / variant: (+/-) M-Technik
• Supplementary Article/Info 2: with bearing
• Guarantee: 5 years guarantee
• Weight [kg]: 0.7
• Packaging length [cm]: 15.1
• Packaging width [cm]: 8.4
• Packaging height [cm]: 14.6
• Manufacturer: MONROE