• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 250
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

• Number of pins: 2
• Colour: blue
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Exhaust System: for pre-catalytic converter
• for OE number: 11781721125
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 790
• Number of pins: 4
• Weight [g]: 131
• Gross Weight [g]: 161
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
3 (E30), 09.82-03.92
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
3 (E30), 09.82-03.92
(kvaliteediklass: Q)"

• Length [mm]: 55
• Spanner Size: 19
• Colour: brown
• Material: Brass, Plastic
• Number of pins: 1
• Thread Size: M14x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Connector Shape: rectangular
• Supplementary Article/Info 2: with seal ring
• Colour Coding: blue
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Switch Point [°C]: 140
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Socket colour: light blue
• Connector Shape: rectangular
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Thread Size: M12x1,5
• Length [mm]: 51
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0124
• Additional information: 21-0124

• Length [mm]: 55
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Colour: brown
• Material: Brass, Plastic
• Switch Point [°C]: 130
• Screw length below head [mm]: 29
• Weight [kg]: 0.03
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

• Length [mm]: 55
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Colour: brown
• Material: Plastic, Brass
• Switch Point [°C]: 130
• Screw length below head [mm]: 29
• Weight [kg]: 0.03
• Manufacturer: SWAG
• Name: SW 20 93 6416

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1.5
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• for OE number: 12 62 1 710 512
• Thread Size: M14x1,5
• Colour: light brown, brown, black
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M40 B16 (164E1)
• Colour: brown
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

Manufacturer: FAE

• Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Socket colour: black
• Manufacturer: ERA

• Thread Size: M 14x1,5
• Number of pins: 1
• Colour: brown
• Supplementary Article/Supplementary Info: with seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Length [mm]: 55
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Colour: black
• Material: Brass, Plastic
• Switch Point [°C]: 130
• Screw length below head [mm]: 29
• Weight [kg]: 0.032
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Latching Connection
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 13621433077
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Length [mm]: 50.7
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M40 B16 (164E1)
• Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year from: 07.1988
• Engine Code: M40B16C
• Housing Colour: black
• Number of pins: 2
• Thread Size: M14X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI

• Length [mm]: 50.7
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 40 91 7695
• Lisainfo: 40 91 7695 SWA
• Additional information: 40 91 7695 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with headlamp cleaning system
• Weight [kg]: 0.016
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M14 x 1,5
• Manufacturer: ERA

• Engine Code: M40 B16 (164E1)
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 302
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: blue
• Manufacturer Restriction: Bosch
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 628, 74
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M14x1,5
• Colour: brown
• Sensor Type: NTC Sensor
• Number of pins: 1
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107211
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M40 B16 (164E1)
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Vehicle Equipment: for vehicles with headlamp cleaning system
• Number of connectors: 2
• Length [mm]: 97.5
• Weight [kg]: 0.02
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV647
• Manufacturer: ESEN SKV

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Construction Year from: 09.1988
• Manufacturer: BOSCH
• Name: BS 0280130026

• Vehicle Equipment: for vehicles with headlamp cleaning system
• Length [mm]: 97.5
• Number of connectors: 2
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: with cable
• for OE number: 12 12 1 721 775
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Manufacturer: METZGER

• Number of pins: 4
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• without ECE/ABE approval:
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV607

• Construction Year from: 04.1989
• Number of pins: 3
• Connector Shape: rectangular
• Cable Length [mm]: 660
• Sensor Type: Inductive Sensor
• for OE number: 12 14 1 720 858
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Cable Length [mm]: 735
• Manufacturer: FAE

• Engine Code: M40 B16 (164E1)
• Length [mm]: 725
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Construction Year from: 09.1988
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Sensor Type: Inductive Sensor
• Cable Length [mm]: 670
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 09.1988
• Engine Code: M40 B16
• Voltage [V]: 12
• Length [mm]: 1,490
• Number of circuits: 4
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV049

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
3 (E30), 09.82-03.92
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
3 (E30), 09.82-03.92
(kvaliteediklass: Q)"

• Engine Code: M40 B16 (164E1)
• Name: EP 1.995.091
• Manufacturer: EPS

• Construction Year from: 09.1988
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,500
• Number of circuits: 4
• Weight [kg]: 0.23
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV586
• Manufacturer: ESEN SKV

• Construction Year from: 09.1988
• Engine Code: M40 B16 (164E1)
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,450
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.218
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1988
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.1988
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M40 B16 (164E1)
• Cable Length [mm]: 1
• Name: DE ES10986-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Resistor [Ohm]: 970
• Cable Length [mm]: 470
• Manufacturer: METZGER

• Construction Year from: 09.1988
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 764
• Available as universal article as well, see article no.: 0258986503
• Recommended change interval [km]: 100,000
• Manufacturer: BOSCH

• Number of pins: 9
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Length [mm]: 800
• Cable Length [mm]: 750
• Number of pins: 2
• Number of connectors: 2
• Required quantity: 2
• Weight [kg]: 0.122
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 1
• Socket colour: black
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 12621710512
• Supplementary Article/Info 2: with seal ring