• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 295
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Oxygen Sensor: Regulating Probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: after catalytic converter
• Number of circuits: 4
• Switch Point [°C]: 98
• Cable Length [mm]: 1,000
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Length [mm]: 320
• Fabrication Number: ESL-BM-008
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Length [mm]: 990
• Fabrication Number: ESL-BM-002
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Length [mm]: 370
• Fabrication Number: ESL-BM-003

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: JAPKO

• Engine Code: M52 B28 (286S1)
• Construction Year from: 09.1998
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 990
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Construction Year from: 10.1998
• Oxygen Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: M52 B28 (286S1)
• Construction Year from: 09.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Thread Size: M18 x 1,5
• Cable Length [mm]: 905
• Conductor Number: 4
• Length [mm]: 1,020
• Number of circuits: 4
• Weight [kg]: 0.174
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 10.1998
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: M52 B28 (286S1)
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Construction Year from: 09.1998
• Oxygen Sensor: Regulating Probe
• Length [mm]: 320
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 290
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 09.1998
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M52 B28 (286S1)
• Cable Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Resistor [Ohm]: 2.1
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 300
• Cable Length [mm]: 300
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Engine Code: M52 B28
• Voltage [V]: 12
• Length [mm]: 430
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV080

• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES10983-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 990
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.18
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV665

• Resistor [Ohm]: 2.1
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 990
• Cable Length [mm]: 990
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Cable Length [mm]: 295
• Number of pins: 4
• Oxygen Sensor: Heated
• Voltage [V]: 12
• Thread Size: M18 x 1,5
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: M52 B28
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Construction Year from: 10.1998
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter

• Construction Year from: 09.1998
• Oxygen Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 350
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: for cylinder 1-3, for cylinder 4-6, before catalytic converter

• Engine Code: M52 B28 (286S1)
• Construction Year from: 09.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Conductor Number: 4
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.123
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Construction Year from: 09.1998
• Length [mm]: 350
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Required quantity: 2
• Oxygen Sensor: Diagnostic Probe, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Cable Length [mm]: 1,030
• Weight [kg]: 0.138
• Name: SW 33 10 4117
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Construction Year from: 09.1998
• Length [mm]: 1,020
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year from: 07.1998
• Engine Code: M52B28
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 300
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO

• Construction Year from: 09.1998
• Fitting Position: Rear, Front
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Oxygen Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 980
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Construction Year from: 10.1998
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 320
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 07.1998
• Engine Code: M52B28
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,020
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.1998
• Fitting Position: Left, after catalytic converter, Right
• Oxygen Sensor: Diagnostic Probe
• Block Separation:
• Length [mm]: 990
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 09.1998
• Fitting Position: Left, before catalytic converter, Right
• Oxygen Sensor: Regulating Probe
• Block Separation:
• Length [mm]: 350
• Number of circuits: 4
• Manufacturer: VDO

• Oxygen Sensor: Heated
• Number of pins: 4
• Connector Shape: round
• Cable Length [mm]: 860
• for article number: 81533
• for OE number: MHK000220
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Probe
• Construction Year to: 09.1998
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 900
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 09.1998
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Manufacturer Restriction: 4-adrig
• Cable Length [mm]: 990
• Thread Size: M 18x1,5
• Manufacturer: METZGER