Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Packing Type: Bottle
- Colour: red
- Chemical Properties: Part Synthetic Oil
- Capacity [litre]: 1
-
Recommended change interval [km]: 60,
000 - Observe system fill quantity:
- Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Width [mm]: 115
- Length [mm]: 60
-
Article number of the recommended special tool: V99-
1017 - Height [mm]: 225
- Manufacturer: VAICO
Oil manufacturer recommendation: ZF TE-ML 11B, VOITH H55.6335.xx, VOLVO 97340, Allison TES 389, Ford Mercon, ZF TE-ML 09, Allison C-4, ZF TE-ML 14A, MB 236.9, ZF TE-ML 02F, Volvo 97341, ZF TE-ML 03D, DTFR 13C100, MB 236.1, ZF TE-ML 17C, ZF TE-ML 04D, MAN 339 Typ Z1/V1/L1, CAT TO-2, DTFR 13C170, GM Dexron III-H, ATF III General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Code: GA8HP75Z
- Colour of operating fluid: yellow
- Capacity [litre]: 1
- Weight [kg]: 0.945
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Code: GA8HP75Z
- Colour of operating fluid: yellow
- Capacity [litre]: 1
- Weight [kg]: 0.945
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Name: FE 27975
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 230
- Colour: red
- Capacity [litre]: 5
- Chemical Properties: Part Synthetic Oil
- Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
-
Recommended change interval [km]: 60,
000 -
Article number of the recommended special tool: V99-
1017 - Length [mm]: 300
- Width [mm]: 115
- Packing Type: Canister
- Manufacturer: VAICO
Oil manufacturer recommendation: CAT TO-2, GM Dexron III-H, ZF TE-ML 14A, DTFR 13C100, VOLVO 97340, Ford Mercon, ZF TE-ML 03D, Allison TES 389, ATF III, ZF TE-ML 09, MB 236.1, Volvo 97341, ZF TE-ML 04D, ZF TE-ML 17C, Allison C-4, ZF TE-ML 02F, ZF TE-ML 11B, VOITH H55.6335.xx, DTFR 13C170, MB 236.9, MAN 339 Typ Z1/V1/L1 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Code: GA8HP75Z
- Colour of operating fluid: yellow
- Capacity [litre]: 20
- Weight [kg]: 17.99
-
Manufacturer: FEBI-
OLEJE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Number: ZF GA8P75H 8/
1 - Oil manufacturer recommendation: VW G 05
Specification: SPH-IV, Aisin Warner AW-1, HYUNDAI NWS-9638, Hyundai SP IV, MB 236.12, MB 236.14, MB 236.15, MB 236.17, Mitsubishi ATF-J3, Mitsubishi ATF-PA, Mitsubishi SP-IV, Nissan Matic S, SAAB 93 165 147, Toyota Type WS (JWS, VW G 05, VW G 055 162, VW G 055 190
-
Transmission Number: ZF GA8P75H 8/
1 - Oil: Full Synthetic Oil
- Oil manufacturer recommendation: JW
Specification: Aisin Warner AW-1, CHRYSLER 68157995AA, DSI H 6-SPEED TRANSM, Fiat 9.55550-AV2, Fiat 9.55550-AV5, Ford WSS-M2C924-A, GM Dexron VI, Honda ATF DW-1, HYUNDAI NWS-9638, Hyundai SP IV, JAGUAR 02JDE26444, Jaguar Fluid 8432, JW
-
Transmission Number: ZF GA8P75H 8/
1 - Oil: Full Synthetic Oil
- Oil manufacturer recommendation: VW G 055 025
Specification: Aisin Warner AW-1, ATF-Z1, GM Dexron III, Honda/Kia/Mitsubishi, Hyundai/KIA CVT-1, JWS 3309/3314/3317, JWS 3320 (CVT), MB 236.1 - 236.11, MB 236.20, Mercon SP, Mercon V, Mitsubishi SP-IV, Ni, VW G 052 055, VW G 052 180, VW G 052 516, VW G 055 025
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks