• Length [mm]: 990
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-BM-005
• Manufacturer: NTY
• Name: NTY ESL-BM-005

Fitting Position: Left Front, Right Front, before catalytic converter

• Connector Shape: rectangular
• Thread Size: M12
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.2
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Number of pins: 4
• Colour: black
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Fabrication Number: ECT-BM-010
• Manufacturer: NTY

• Connector Shape: rectangular
• Operating Mode: Hydraulic
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M52 B28 (286S1)
• Pressure [bar]: 0
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Tightening torque from [Nm]: 50
• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Tolerance [%]: 10
• Thread Size: M12x1,5
• Spanner Size: 24
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Number of pins: 1
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6ZL006097001

• Thread Size: M 12x1,5
• Housing Colour: brown
• Number of pins: 1
• Manufacturer: FAE

• Length [mm]: 68
• Housing Colour: black
• Spanner Size: 22
• Manufacturer: KAMOKA

• Length [mm]: 68
• Spanner Size: 22
• Colour: black
• Number of pins: 4
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Thread Size: M12x1,5
• Colour: brown
• Weight [kg]: 0.043
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.034
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: round
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 12 x 1,5
• Pressure [bar]: 0.3
• Manufacturer: MEAT&DORIA

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 20 23 0002

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 4
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621703993
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 1
• Switch pressure from [bar]: 0.23
• Switch pressure to [bar]: 0.43
• Thread Size: M 12 x 1,5
• Colour: brown
• Version: Neue Version
• Manufacturer: METZGER

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Fabrication Number: ECT-BM-013
• Manufacturer: NTY

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Combi Switch Function: Normally Closed Contact
• Colour: brown
• Spanner Size: 24
• Thread Size: M12 x 1,5
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.02
• Warranty: 3 years warranty
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 40
• for OE number: 13 62 1 739 510
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Length [mm]: 79
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• for OE number: 12 14 1 703 277
• Cable Length [mm]: 760
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: black
• Fabrication Number: ECP-BM-002
• Manufacturer: NTY

• Construction Year to: 09.1998
• Sensor Type: Hall Sensor
• Number of pins: 3
• Cable Length [mm]: 785
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 13621703993, MEK000020, MEK100160A

• Engine Code: M52 B28 (286S1)
• Sensor Type: Active sensor
• for OE number: 12 14 1 435 351
• Manufacturer: KAMOKA

• Engine Code: M52 B28 (286S1)
• Cable Length [mm]: 760
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Thread Size: M12x1,5
• Spanner Size: 24
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Housing Colour: brown
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL009600271
• Manufacturer: HELLA

• Fabrication Number: ECP-BM-008
• Manufacturer: NTY

• Fitting Position: Intake Side
• Supplementary Article/Info 2: with cable
• Voltage [V]: 12
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 78.5
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.1998
• Sensor Type: Active sensor
• Cable Length [mm]: 710
• Number of pins: 3
• Name: Andur,p””rded
• Manufacturer: MAX

• Construction Year to: 09.1998
• Engine Code: M52
• Voltage [V]: 12
• Length [mm]: 670
• Number of pins: 2
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: M52 B28 (286S1)
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: M52 B28 (286S1)
• Sensor Type: Active sensor
• for OE number: 12 14 1 435 350
• Manufacturer: KAMOKA

• Number of pins: 3
• Operating Mode: Mechanical
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: DLP

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M52 B28 (286S1)
• Sensor Type: Active sensor
• for OE number: 13 62 7 787 192
• Manufacturer: KAMOKA

• Construction Year from: 10.1998
• Number of pins: 3
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 405
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 20 93 2915

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 13 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Voltage [V]: 12
• Length [mm]: 310
• Number of pins: 3
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV239

Manufacturer: MAGNETI MARELLI

• Engine Code: M52 B28 (286S1)
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: rectangular
• for OE number: 12 14 1 703 221
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Height [mm]: 33
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 09.1998
• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: black
• Sensor Type: Hall Sensor
• Cable Length [mm]: 760
• for OE number: 12 14 1 703 277
• Manufacturer: MEAT&DORIA

• Length [mm]: 390
• Number of pins: 3
• Fitting Depth [mm]: 27.5
• Housing Colour: black
• Weight [kg]: 0.062
• Resistor [Ohm]: 13
• Manufacturer: ERA

• Engine Code: M52 B28 (286S1)
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 3
• Name: Andur,drosselklapiasend
• Manufacturer: MAX

• Construction Year from: 09.1998
• Number of pins: 3
• Manufacturer: DELPHI

• Production date to: 31.08.1998
• Sensor Type: Hall Sensor
• Cable Length [mm]: 726.9
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Construction Year to: 09.1998
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M52 B28 (286S1)
• Construction Year from: 10.1998
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Construction Year from: 09.1996
• Engine Code: M 52 B 28
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• for OE number: 12 14 1 703 221
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Number of connectors: 3
• Weight [kg]: 0.03
• Name: SW 33 10 9727
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: black
• Cable Length [mm]: 760
• Number of pins: 3
• Weight [kg]: 0.07
• Fitting Depth [mm]: 24
• Resistor [kOhm]: 18
• Manufacturer: ERA

• Engine Code: M52B28
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Additional information: 253835 VALEO
• Lisainfo: 253835 VALEO

• Engine Code: M52 B28 (286S1)
• Length [mm]: 490
• Number of pins: 3
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Construction Year to: 09.1998
• Engine Code: M52B28
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.09
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL
• Lisainfo: VAL254030
• Additional information: VAL254030

• Construction Year from: 11.1998
• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 12 14 1 709 616, NSC106100
• Manufacturer: MEAT&DORIA

• Construction Year to: 09.1995
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Colour: black
• Number of pins: 3
• Weight [kg]: 0.03
• Fitting Depth [mm]: 33
• Manufacturer: ERA

• Engine Code: M52B28
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Construction Year to: 09.1998
• Voltage [V]: 12
• Cable Length [mm]: 785
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M52B28
• Number of pins: 3
• Number of connectors: 3
• Supplementary Article/Info 2: for crankshaft, without cable
• Colour: black
• Sensor Type: Hall Sensor, Active sensor
• Supplementary Article/Supplementary Info: with holder
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 33
• Connector Shape: D Shape
• Number of mounting bores: 1
• Mounting Angle [degrees]: 90
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Construction Year from: 10.1998
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. BMW M52/M54 98-
• Manufacturer: BRM

• Engine Code: M52 B28 (286S1)
• Length [mm]: 210
• Number of pins: 3
• Fitting Depth [mm]: 14
• Resistor M[ohm]: 13.5
• Manufacturer: ERA

• Construction Year to: 09.1998
• Number of pins: 3
• Cable Length [mm]: 755
• Fitting Depth [mm]: 24
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Construction Year from: 09.1998
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: without gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Number of pins: 3
• Cable Length [mm]: 405
• Fitting Depth [mm]: 28
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Construction Year from: 10.1998
• Number of pins: 3
• Fitting Depth [mm]: 33.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI