• Fitting Position: Cylinder Head
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Fabrication Number: ECT-BM-002
• Manufacturer: NTY

• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Engine Code: N57 D30 A
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• for OE number: 13 62 7 823 993
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 2
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Manufacturer: FACET

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-003
• Manufacturer: NTY

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• for OE number: 13 62 7 804 742, 89420 WA010
• Number of pins: 3
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Fabrication Number: ECM-BM-000
• Manufacturer: NTY

• Number of pins: 2
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Housing Colour: black
• Fitting Position: Cylinder Head
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Height [mm]: 28.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N57 D30 A
• Manufacturer: FACET

• Engine Code: N57 D30 A
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Number of pins: 3
• Fabrication Number: ECS-BM-003

• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: NRF

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Emission Standard: Euro 4/Euro 5
• Manufacturer: VERNET

• Number of pins: 3
• Pressure from [kPA]: 50
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA POWIETRZA BMW 114D, X7 XDRIVE 30D 10-

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Exhaust System: before soot particulate filter
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 93 6411
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV801

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N57 D30 A
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Engine Code: N57 D30 A
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Manufacturer: FACET

• Engine Code: N57 D30 A
• Manufacturer: FACET

• Engine Code: N57 D30 A
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 89.9
• Manufacturer: DELPHI
• Name: DE DPS00004

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fabrication Number: EFP-BM-004
• Manufacturer: NTY
• Name: NTY EFP-BM-004

• Exhaust System: before turbocharger
• Connector Shape: oval
• Number of pins: 3
• for OE number: 13628507634
• Manufacturer: NRF

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Name: SW 33 10 1713
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 13 62 7 804 150
• Fabrication Number: EPP-BM-016
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 13627805152
• Manufacturer: MEAT&DORIA

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 551455
• Manufacturer: ERA

• Number of pins: 3, 1
• Connector Shape: oval
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• Fitting Position: before soot particulate filter
• Guarantee: 5 years guarantee
• Number of connectors: 2
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before turbocharger
• Number of pins: 3
• Opening pressure [kPa]: 100
• Name: CZUJNIK CI—N. SPALIN BMW 114D, X6 XDRIVE 40D 04-
• Manufacturer: DLP

• Fitting Position: Fuel Rail
• Thread Size: M 18
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Thread Pitch [mm]: 1.5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV615

• not for emission standard: Euro 3, Euro 5
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Number of pins: 3
• Pressure to [kPA]: 400
• Manufacturer: FAE

• Number of pins: 3
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• for OE number: 13627804742
• Manufacturer: MEAT&DORIA

• Engine Code: N57 D30 A
• for OE number: 13 62 7 805 758
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Fabrication Number: EGT-BM-026
• Fitting Position: before catalytic converter
• Cable Length [mm]: 975
• Number of pins: 2
• Manufacturer: NTY

• Fabrication Number: EGT-BM-023
• Cable Length [mm]: 597
• Number of pins: 2
• Sensor Type: NTC Sensor
• for OE number: 13628507629
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: without connection line
• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N57 D30 A
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Fitting Position: EGR valve at manifold
• Cable Length [mm]: 560
• Overall Length [mm]: 650
• for OE number: 13628507629
• Manufacturer: METZGER

• Fitting Position: Exhaust Manifold
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Number of pins: 2
• Guarantee: 3 years guarantee
• Version: AM
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV437

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,200
• Thread Size: M18X1,5
• for OE number: 13537800602
• Manufacturer: MEAT&DORIA

• Exhaust System: before soot particulate filter
• Cable Length [mm]: 300
• Number of pins: 2
• Name: CZUJNIK TEMP. SPALIN BMW 1, 2, 3 2,0-3,0 D 04-
• Manufacturer: DLP

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: A0035427018
• Manufacturer: MEAT&DORIA

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Number of pins: 2
• Version: IAM
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Fitting Position: Particulate Filter
• Number of pins: 2
• Version: IAM
• Manufacturer: METZGER

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905