• Fitting Position: Rear Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Number of Holes: 5
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Brake Disc Type: Vented
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Fitting Position: Rear Axle
• Number of Holes: 5
• Centering Diameter [mm]: 75
• Height [mm]: 71
• Bolt Hole Circle Ø [mm]: 120
• Minimum thickness [mm]: 18.4
• Name: PIDURIKETAS
• Manufacturer: MAX

• Brake Disc Type: Vented
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Fitting Position: Front Axle
• Number of Holes: 5
• Centering Diameter [mm]: 75
• Height [mm]: 73
• Bolt Hole Circle Ø [mm]: 120
• Minimum thickness [mm]: 26.4
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18.4
• Height [mm]: 70.8
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 75
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Hub Diameter [mm]: 165
• Weight [kg]: 7.44
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 71
• Outer Diameter [mm]: 330
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 18.4
• Centering Diameter [mm]: 75
• Weight [kg]: 7.44
• Observe service information:
• Manufacturer: FEBI HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 18.4
• Height [mm]: 70.8
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: painted
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO

• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 71
• Outer Diameter [mm]: 330
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 18.4
• Centering Diameter [mm]: 75
• Weight [kg]: 7.44
• Observe service information:
• Manufacturer: BLUEPRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 330
• Height [mm]: 71
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18.4
• Number of Holes: 5
• Surface: painted
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0277/1467
• Surface: Coated
• Machining: High-carbon
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18.4
• Centering Diameter [mm]: 75
• Height [mm]: 71
• Name: DE BG4644C
• Manufacturer: DELPHI

• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 71
• Outer Diameter [mm]: 330
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 18.4
• Centering Diameter [mm]: 75
• Weight [kg]: 7.44
• Name: SW 20 93 8577
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 73
• Outer Diameter [mm]: 327
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 26.4
• Centering Diameter [mm]: 75
• Weight [kg]: 10.1
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 73
• Outer Diameter [mm]: 327
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 26.4
• Centering Diameter [mm]: 75
• Weight [kg]: 10.1
• Observe service information:
• Manufacturer: BLUEPRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 330
• Height [mm]: 71
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18.4
• Centering Diameter [mm]: 75
• Bolt Hole Circle Ø [mm]: 120
• Wheel Bolt Bore Diameter [mm]: 16.5
• Number of Holes: 5
• Brake Disc Type: Vented
• Surface: Zink flake coated
• Supplementary Article/Info 2: with bolts/screws
• Quality: PREMIUM
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.

• Fitting Position: Rear Axle
• Brake Disc Type: Vented
• Number of Holes: 5
• Outer Diameter [mm]: 330
• Centering Diameter [mm]: 75
• Height [mm]: 71
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18.4
• Bolt Hole Circle Ø [mm]: 120
• Colour: black
• Surface: painted
• Thread Size: 16.6
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quantity per packing unit: 2
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 1
• Outer Diameter [mm]: 327
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 26.4
• Centering Diameter [mm]: 75
• Weight [kg]: 10.1
• Name: SW 20 93 8576
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18.4
• Height [mm]: 70.8
• Bolt Hole Circle Ø [mm]: 120
• Brake Disc Type: Vented
• Centering Diameter [mm]: 75
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 16.6
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Height [mm]: 70.8
• Minimum thickness [mm]: 18.4
• Surface: Coated
• Inner Diameter [mm]: 154
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 16.6
• Packaging length [cm]: 34.3
• Packaging width [cm]: 34.3
• Packaging height [cm]: 17.5
• Weight [kg]: 7.4
• Name: PIDURIKETAS
• Manufacturer: TEX
• Quality class: Q

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Height [mm]: 73
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Outer Diameter [mm]: 328
• Number of Holes: 5
• Centering Diameter [mm]: 75
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Manufacturer: SKF TARCZE HAM

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 71
• Centering Diameter [mm]: 75
• Outer Diameter [mm]: 330
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 18.4
• Name: BR 09.B569.11
• Manufacturer: BREMBO
• Quality class: Q

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 328
• Weight [kg]: 9.8
• Height [mm]: 73
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Surface: Coated
• Minimum thickness [mm]: 26.4
• Name: ALT 128586FCAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18.4
• Brake Disc Type: Vented
• Number of Holes: 5
• Machining: High-carbon
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 120
• Height [mm]: 71
• Centering Diameter [mm]: 75
• Inner Diameter [mm]: 154
• Bore Diameter [mm]: 16.5
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Rear Axle
• Construction Year from: 01.2016
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 71
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 20
• Outer Diameter [mm]: 330
• Number of Holes: 5
• Centering Diameter [mm]: 75
• Surface: painted
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26.4
• Height [mm]: 73
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 75
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Hub Diameter [mm]: 165
• Weight [kg]: 10.5
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: E1 90R-02C0277/1467
• Brake Disc Type: Vented
• Number of Holes: 5
• Supplementary Article/Info 2: without ABS sensor ring, without wheel bearing
• Machining: High-carbon
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18
• Centering Diameter [mm]: 75
• Height [mm]: 71
• Quality class: PJ
• Name: Brake discs

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Height [mm]: 71
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 18.4
• Weight [kg]: 7.4
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 26.4
• Height [mm]: 73
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: painted
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Height [mm]: 73
• Minimum thickness [mm]: 26.4
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 153.8
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 16.5
• Number of bolts/screws: 1
• Weight [kg]: 10.2
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355129631
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs, with bolts/screws

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17.6
• Brake Disc Type: Vented
• Number of Holes: 5
• Machining: High-carbon
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 120
• Height [mm]: 71
• Centering Diameter [mm]: 75
• Inner Diameter [mm]: 154
• Bore Diameter [mm]: 16.5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 5
• Outer Diameter [mm]: 328
• Centering Diameter [mm]: 75
• Height [mm]: 73
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26.4
• Bolt Hole Circle Ø [mm]: 120
• Colour: black
• Surface: painted
• Thread Size: 16.6
• Test Mark: E1 90R-02 C0176/0567
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26.4
• Height [mm]: 73
• Bolt Hole Circle Ø [mm]: 120
• Brake Disc Type: Vented
• Centering Diameter [mm]: 75
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 16.6
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Front Axle
• Outer Diameter [mm]: 328
• Height [mm]: 73
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26.4
• Centering Diameter [mm]: 75
• Bolt Hole Circle Ø [mm]: 120
• Wheel Bolt Bore Diameter [mm]: 16.5
• Number of Holes: 5
• Brake Disc Type: Vented
• Surface: Zink flake coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Quality: PREMIUM
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Height [mm]: 73
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 26.4
• Weight [kg]: 10.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 71
• Centering Diameter [mm]: 75
• Number of Holes: 5
• Quantity Unit: Set
• Surface: Coated
• Version: JC
• Weight [kg]: 16.2
• Bore Diameter [mm]: 75
• Minimum thickness [mm]: 18.4
• Packing Type: Carton
• Packaging length [cm]: 35
• Packaging width [cm]: 35
• Packaging height [cm]: 17
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 73
• Centering Diameter [mm]: 75
• Outer Diameter [mm]: 328
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 26.4
• Tightening Torque [Nm]: 140
• Manufacturer: BREMBO
• Name: BR 09.B570.11
• Quantity per packing unit: 2
• Quality class: Q

• Fitting Position: Front Axle
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 26.4
• Height [mm]: 73
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: painted
• Machining: High-carbon
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26.4
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 120
• Height [mm]: 73.1
• Centering Diameter [mm]: 75
• Inner Diameter [mm]: 153.8
• Bore Diameter [mm]: 16.5
• Test Mark: E1 90R-02C0115/0570
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quantity per packing unit: 2
• Quality class: Q

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Height [mm]: 73
• Minimum thickness [mm]: 26.4
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 153.8
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 16.5
• Packaging length [cm]: 35.8
• Packaging width [cm]: 35.8
• Packaging height [cm]: 10.5
• Weight [kg]: 10.2
• Name: PIDURIKETAS
• Manufacturer: TEX
• Quantity per packing unit: 2
• Quality class: Q

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 73.1
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Number of mounting bores: 1
• Number of Holes: 5
• Quantity Unit: Piece
• Surface: Coated
• Test Mark: R90 Homologated
• Version: JC
• Weight [kg]: 10.47
• Bore Diameter [mm]: 16.5
• Minimum thickness [mm]: 26.4
• Packing Type: Carton
• Bore Diameter 2 [mm]: 16.5
• Packaging length [cm]: 34
• Packaging width [cm]: 34
• Packaging height [cm]: 9.3
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 71
• Centering Diameter [mm]: 75
• Outer Diameter [mm]: 330
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 18.6
• Manufacturer: BREMBO
• Name: BR 09.B569.1X
• Quality class: Q

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Machining: High-carbon
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26.4
• Centering Diameter [mm]: 75
• Height [mm]: 73
• Bolt Hole Circle Ø [mm]: 120
• Bore Diameter up to [mm]: 16.6
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25.6
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 120
• Height [mm]: 73.1
• Centering Diameter [mm]: 75
• Inner Diameter [mm]: 153.8
• Bore Diameter [mm]: 16.5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Manufacturer: ATE
• Quantity per packing unit: 2

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Fitting Position: Front Axle
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 28
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 73
• Centering Diameter [mm]: 75
• Outer Diameter [mm]: 328
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 26.6
• Tightening Torque [Nm]: 140
• Manufacturer: BREMBO
• Name: BR 09.B570.1X
• Quantity per packing unit: 2
• Quality class: Q

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle Left
• Brake Disc Type: internally vented, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Height [mm]: 73
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• paired article number: 150.3494.55
• directional:
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 26.4
• Weight [kg]: 10.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle Right
• Brake Disc Type: internally vented, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Height [mm]: 73
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• paired article number: 150.3494.54
• directional:
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 26.4
• Weight [kg]: 10.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 20
• Height [mm]: 71
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Test Mark: KBA 60872
• Minimum thickness [mm]: 18.4
• Weight [kg]: 7.4
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 328
• Brake Disc Thickness [mm]: 28
• Height [mm]: 73
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 75
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 26.4
• Weight [kg]: 10.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN