Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Fitting Position: Rear Axle
- Height [mm]: 220
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Right,
Front Axle Left - Height [mm]: 202
-
Supplementary Article/Info 2: with protective cap/
bellow -
Material: PU
(Polyurethane) - Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Length [mm]: 108
- Weight [kg]: 0.16
- Packaging length [cm]: 10.7
- Packaging width [cm]: 3.3
- Packaging height [cm]: 3.3
- Manufacturer: FEBEST
-
Lisainfo: 1929-
001 FEBEST -
Additional information: 1929-
001 FEBEST
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - for special equipment code: S223A
- Fitting Position: Rear Axle
- Height [mm]: 220
- Weight [kg]: 0.375
- Packaging length [cm]: 22
- Packaging width [cm]: 8
- Packaging height [cm]: 8
- Manufacturer: FEBEST
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Fitting Position: Rear Axle
- Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Length [mm]: 95
- Packaging length [cm]: 10.8
- Packaging width [cm]: 3.3
- Packaging height [cm]: 3.3
- Weight [kg]: 0.213
- Manufacturer: FEBEST
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Required quantity: 2
- Suspension: for vehicles with sports suspension
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Suspension: for vehicles with electronic suspension control
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Required quantity: 2
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Weight [kg]: 0.26
- Packaging length [cm]: 14.5
- Packaging width [cm]: 3.5
- Packaging height [cm]: 3.5
- Manufacturer: FEBEST
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
- Fitting Position: Front Axle
- Name: CFD PK0309
- Manufacturer: DACO
- Fitting Position: Rear Axle
-
Suspension: for vehicles with height-
adjustable suspension - Quantity per packing unit: 2
- Guarantee: 5 years guarantee
- Weight [kg]: 0.282
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE ODBOJE I OSLONY
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Weight [kg]: 0.26
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Weight [kg]: 0.26
- Name: SW 33 10 8421
- Manufacturer: SWAG
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - for special equipment code: S223A
- Fitting Position: Front Axle
- Weight [kg]: 0.368
- Packaging length [cm]: 14.8
- Packaging width [cm]: 12.4
- Packaging height [cm]: 7.3
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
- Fitting Position: Front Axle
- Weight [kg]: 0.14
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: KYB
- Fitting Position: Front Axle
- Weight [kg]: 0.14
- Name: SW 33 10 8410
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
- Name: Shock absorber protection kit left+right
- Quality class: Q
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
-
Name: BI 11-
271314 - Manufacturer: BILSTEIN
- Quality class: Q
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
- Guarantee: 5 years guarantee
- Weight [kg]: 0.314
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
- Guarantee: 5 years guarantee
- Weight [kg]: 0.364
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks