• Fitting Position: Rear Axle
• Brake System: Bosch
• Height [mm]: 61.5
• Width [mm]: 126
• Thickness [mm]: 18.9
• Wear Warning Contact: prepared for wear warning indicator
• Lisainfo: Brake pad set, rear, 18.9 mm
• Additional information: Brake pad set, rear, 18.9 mm

• Filter type: In-Line Filter
• Thread Size 1: M12X1.5
• Thread Size 2: M14X1.5
• Height [mm]: 170
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 91
• Manufacturer: DENCKERMANN FILTRY

• Diameter [mm]: 90
• Height [mm]: 185
• Filter type: Spin-on Filter
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 18.6
• Length [mm]: 126
• Weight [kg]: 1.56
• Height 1 [mm]: 63
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: Bosch
• WVA Number: 23021
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Thickness [mm]: 18.6
• Length [mm]: 126
• Weight [kg]: 1.56
• Height 1 [mm]: 63
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: Bosch
• WVA Number: 23021
• Fitting Position: Rear Axle
• Manufacturer: ASHIKA-KLOCKI

• Filter type: Spin-on Filter
• Height [mm]: 167
• Outer Diameter [mm]: 82
• Entry Thread Size: M12x1.25
• Exit Thread Size: M 14x1,5
• Name: VA 587205
• Manufacturer: VALEO

• Filter type: Spin-on Filter
• Height [mm]: 167
• Outer Diameter [mm]: 82
• Entry Thread Size: M14x1.5
• Exit Thread Size: M12x1.5
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: Front Axle
• Brake System: PERROT
• Width [mm]: 149
• Height [mm]: 75
• Thickness [mm]: 17.5
• WVA Number: 20784
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 2.01
• Name: VA 302502
• Manufacturer: VALEO

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D927-7828
• Brake System: Perrot
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20784
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 149.2
• Width 2 [mm]: 149
• Height 1 [mm]: 75
• Height 2 [mm]: 75
• Thickness 1 [mm]: 17.5
• Thickness 2 [mm]: 17.5
• Name: DE LP468
• Manufacturer: DELPHI
• Additional information: LP468 DELPHI
• Lisainfo: LP468 DELPHI

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 18
• Width [mm]: 149
• Height [mm]: 75
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: PERROT
• Weight [kg]: 1.9
• Manufacturer: TOMEX

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 18
• Width [mm]: 149
• Height [mm]: 75
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: PERROT
• Warning Contact Length [mm]: 100
• Weight [kg]: 1.91
• Manufacturer: TOMEX

• Fitting Position: Rear Axle
• Width [mm]: 125
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Filter type: In-Line Filter
• Outer Diameter [mm]: 90.5
• Height [mm]: 167
• Manufacturer: HENGST FILTER

• Fitting Position: Front Axle
• Construction Year to: 08.1993
• Quantity per packing unit: 4
• Manufacturer Restriction: PERROT
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E1 90R 01024/464
• Height [mm]: 69
• Width [mm]: 149
• Thickness [mm]: 18
• Manufacturer: LUCAS

SVHC: No information available, please contact the manufacturer!

• Filter type: In-Line Filter
• Height [mm]: 168
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 89
• Entry Thread Size: M12x1.5
• Exit Thread Size: M14x1.5
• SVHC: 7439-92-1; Lead
• Manufacturer: MANN+HUMMEL

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 18.8
• Width [mm]: 125.8
• Height [mm]: 62
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: BOSCH
• Weight [kg]: 1.38
• Manufacturer: TOMEX

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 149
• Thickness [mm]: 18
• Height [mm]: 75
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Perrot
• Supplementary Article/Info 2: with anti-squeak plate
• WVA Number: 21056
• Manufacturer: BREMBO
• Name: BR P 50 134

• Filter type: In-Line Filter
• Diameter [mm]: 82
• Height [mm]: 168.5
• Entry Thread Size: M12x1,5
• Exit Thread Size: M14x1,5
• Packaging height [cm]: 17.5
• Net Weight [g]: 336
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Name: KN KL38
• Manufacturer: KNECHT

• Fitting Position: Rear Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Quantity per packing unit: 4
• Width [mm]: 126
• Thickness [mm]: 19
• Height [mm]: 62
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Bosch
• Supplementary Article/Info 2: with anti-squeak plate
• WVA Number: 23021
• Name: BR P 50 020
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Article number of recommended accessories: 8DK 355 250-301, 8DZ 355 203-031
• Quantity per packing unit: 4
• Width [mm]: 125.8
• Height [mm]: 61.5
• Thickness [mm]: 18.9
• Wear Warning Contact: prepared for wear warning indicator
• Additionally required articles (article numbers): P8027
• WVA Number: 23021
• Brake System: Bosch
• Weight [kg]: 1.4
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DB355008651
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: Perrot
• Supplementary Article/Supplementary Info: without accessories
• Width [mm]: 149
• Height [mm]: 74
• Height 1 [mm]: 74
• Thickness [mm]: 18
• Article number of recommended accessories: FWI206, FWI311
• WVA Number: 20784
• Test Mark: R90 Homologated
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 2.31
• Packing Type: Carton
• Packaging length [cm]: 17.5
• Packaging width [cm]: 10.5
• Packaging height [cm]: 8
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: Bosch
• Supplementary Article/Supplementary Info: without accessories
• Width [mm]: 126
• Height [mm]: 63
• Height 1 [mm]: 63
• Thickness [mm]: 18.6
• Article number of recommended accessories: FWI246
• WVA Number: 23021
• Test Mark: R90 Homologated
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.56
• Packing Type: Carton
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width [mm]: 156
• Height [mm]: 55
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: PERROT
• Width [mm]: 149
• Height [mm]: 75
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: BENDIX-BOSCH
• Width [mm]: 126
• Height [mm]: 62
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Entry Thread Size: M 12 X 1.5
• Exit Thread Size: M 14 X 1.5
• Height [mm]: 126
• Outer Diameter [mm]: 86.5
• Outer Diameter 1 [mm]: 91.8
• Filter type: with water sensor
• Name: BM FE0383
• Manufacturer: BREMSI