• Engine Code: V9X
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Number of pins: 3
• Fabrication Number: ECP-NS-016
• Manufacturer: NTY

• Number of pins: 3
• Name: DE SS12347-12B1
• Manufacturer: DELPHI

• Engine Code: V9X
• Manufacturer: FACET

for article number: 7.8666, 7.8703S, 7.8706, 7.8710S, 7.8716, 7.8718, 7.8719, 7.8720, 7.8737, 7.8782, 7.8785, 7.8883, 7.8916, 7.8930

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: V9X
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Engine Code: V9X
• Number of pins: 3
• Sensor Type: Hall Sensor
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

Manufacturer: JPN

• Number of pins: 3
• Connector Shape: rectangular
• Fitting Depth [mm]: 28.2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Engine Code: V9X
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Construction Year to: 12.2013
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Housing Type: without housing
• Fabrication Number: EPP-NS-007
• Manufacturer: NTY

• Construction Year to: 12.2013
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV656
• Manufacturer: ESEN SKV

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for OE number: 2373100Q0C
• Manufacturer: MEAT&DORIA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28.6
• Supplementary Article/Info 2: without cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Sensor
• Fabrication Number: ESL-CT-008
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Construction Year to: 03.2013
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: JPN

• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 380
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 03.2013
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: JPN

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 230
• Overall Length [mm]: 380
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Housing Type: without housing
• Number of pins: 5
• Manufacturer: ERA

• Engine Code: V9X
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.394
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: V9X
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year to: 12.2013
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2013
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 481
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO

Oxygen Sensor: Regulating Sensor, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Engine Code: V9X
• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor
• Fitting Position: after catalytic converter
• Number of pins: 5
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: 5146168AA
• Manufacturer: MEAT & DORIA

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring