• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

• Number of connectors: 3
• Fabrication Number: ECS-BM-007
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Emission Standard: Euro 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Number of pins: 3
• for OE number: 1362 7 805 152
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Emission Standard: Euro 5
• not for emission standard: Euro 5
• Product fulfils: Euro 5
• Pistikkontaktide arv: 3
• Manufacturer: JPN

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Production date from: 01.07.2014
• not for emission standard: Euro 5
• not for special equipment code: 0161
• Fitting Position: after exhaust gas recirculation
• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 195
• Thread Size: M10x1.25
• Manufacturer: METZGER

• Construction Year from: 07.2014
• Connector Shape: oval
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: oval
• Number of pins: 3
• Fitting Position: Exhaust Manifold
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Emission Standard: Euro 5
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009409021
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV801

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Emission Standard: Euro 5
• Number of connectors: 3
• Material: Plastic
• Name: SW 20 94 7155
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: NRF

• Emission Standard: Euro 5
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV350
• Manufacturer: ESEN SKV

• Emission Standard: Euro 5
• Number of pins: 3
• Opening pressure [kPa]: 89.9
• Manufacturer: DELPHI
• Name: DE DPS00004

• Construction Year from: 07.2014
• Number of connectors: 3
• Guarantee: 5 years guarantee
• Name: HU 137417
• Manufacturer: HUECO / HITACHI

• Engine Code: N47 C20 A
• Fitting Position: after soot particulate filter
• not for emission standard: Euro 5
• Construction Year from: 09.2014
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: EP 1.993.306
• Manufacturer: EPS

• Engine Code: N47 C20 A
• Fitting Position: after soot particulate filter
• not for emission standard: Euro 5
• Construction Year from: 09.2014
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Connector Shape: D Shape
• Number of circuits: 1
• Weight [kg]: 0.03
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 13627805152
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N47 C20 A
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Engine Code: N47 C20 A
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: N47 C20 A
• Fitting Position: after soot particulate filter
• Construction Year from: 09.2014
• Number of pins: 3
• Pressure [Pa] from: 88,000
• Pressure [Pa] to: 202,000
• Manufacturer: FAE

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 551455
• Manufacturer: ERA

• Emission Standard: Euro 5
• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 400
• Number of connectors: 4
• Weight [kg]: 0.133
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N47 C20 A
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 250
• Overall Length [mm]: 370
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Weight [kg]: 0.06
• Name: VA 369070
• Manufacturer: VALEO

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 420
• Fabrication Number: ESL-BM-016
• Manufacturer: NTY

• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 450
• Connector Shape: angular
• Conductor Number: 4
• Thread Size: M18 x 1,5
• Cable Length [mm]: 330
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Weight [kg]: 0.13
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: EGT-BM-024
• Cable Length [mm]: 265
• Number of pins: 2
• Connector Shape: oval
• Fitting Position: after soot particulate filter
• Sensor Type: NTC Sensor
• Manufacturer: NTY

• Block Separation:
• Cable Length [mm]: 310
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.07
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV451

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV407

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 420
• Name: DE ES21086-12B1
• Manufacturer: DELPHI

• Block Separation:
• Shape: straight
• Connector Shape: oval
• Cable Length [mm]: 265
• Socket colour: black
• Number of pins: 2
• Manufacturer: METZGER

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 09.2014
• not for emission standard: Euro 5
• Number of pins: 3
• Manufacturer: MEYLE

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV905
• Manufacturer: ESEN SKV

• Engine Code: N47 C20 A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Block Separation:
• Cable Length [mm]: 265
• Number of pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

Exhaust System: before catalytic converter, before soot particulate filter

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 380
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 420
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0281004079