• Fitting Position: Driver side, Passenger Side
• Wiper blade type: Flat wiper blade
• Quantity: 1
• Length [mm]: 450
• Length [inch]: 18
• Matching Adapter: U
• Adapter enclosed: M+A+B+C
• Blade material: SBR (Styrene butadiene rubber)
• Technical Information: Product may differ from images
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: VAL
• Additional information: 575003 VAL
• Lisainfo: 575003 VAL

Lisainfo: Sünteetiline õli
Spetsifikatsioon: Dexron II / III, Mercon, Mercon V, JASO M 315 1A; MB 23, ZF TE ML 09X /11B /1, MAN 339 type D & F;
Valmistaja vabastus: VW G 052 162 A1; Ni

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 10
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: AJU
• Additional information: AJU22005800
• Lisainfo: AJU22005800

• Quantity per packing unit: 25
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 24
• Thickness [mm]: 2
• Shape: A Shape
• Material: VF (vulcanized fibre)
• Alternative Repair Kit: 505.540
• Manufacturer: ELRING

• Quantity per packing unit: 25
• Inner Diameter [mm]: 12.2
• Thickness [mm]: 2.2
• Material: VF (vulcanized fibre)
• Outer Diameter [mm]: 23.8
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Passenger Side, Driver side, both sides
• Wiper blade type: Bracket wiper blade without spoiler
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: MAX

• Fitting Position: Passenger Side
• Matching Adapter: HKSTD
• Length [mm]: 400
• Length [inch]: 16
• Weight [g]: 83
• Name: TR EF400
• Manufacturer: TRICO

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Height [mm]: 281
• Outer Diameter [mm]: 145
• Inner Diameter [mm]: 85.3
• Filter type: Filter Insert
• Manufacturer: ASHIKA

• Height [mm]: 281
• Outer Diameter [mm]: 145
• Inner Diameter [mm]: 85.3
• Filter type: Filter Insert
• Manufacturer: JAPKO

• Fitting Position: Passenger Side
• Length [mm]: 400
• Length [inch]: 16
• Fastening Type: Hook fixing
• Weight [g]: 85
• Name: TR NF400
• Manufacturer: TRICO

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Height [mm]: 126
• Thread Size: M 24 X 1.5
• Outer Diameter [mm]: 102
• Filter type: Spin-on Filter
• Outer Diameter 2 [mm]: 80
• Inner Diameter 2 [mm]: 72
• Bypass Valve Opening Pressure [bar]: 1
• Manufacturer: DRIVE

• Outer Diameter 1 [mm]: 103
• Thread Size: M24X1.5 -6H
• Height [mm]: 126
• Filter type: Spin-on Filter
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front
• Quantity Unit: Kit
• Length 1 [mm]: 400
• Length 2 [mm]: 400
• Wiper blade type: Bracket wiper blade without spoiler
• Name: Klaasipuhastaja kumm
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Height [mm]: 120
• Outer Diameter [mm]: 100
• Internal Thread Size: M24 x 1,5
• Weight [kg]: 0.738
• Name: OLIFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Height [mm]: 120
• Outer Diameter [mm]: 100
• Internal Thread Size: M24 x 1,5
• Weight [kg]: 0.738
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 121
• Outer Diameter [mm]: 217.5
• Inner Diameter [mm]: 109
• Filter type: Filter Insert
• Manufacturer: ASHIKA

• Height [mm]: 121
• Outer Diameter [mm]: 217.5
• Inner Diameter [mm]: 109
• Filter type: Filter Insert
• Manufacturer: JAPKO

• Length [mm]: 145
• Width [mm]: 86
• Height [mm]: 280
• Filter type: Air Recirculation Filter
• Manufacturer: DENCKERMANN FILTRY

• Quantity per packing unit: 10
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 21
• Thickness [mm]: 1.6
• Material: Aluminium
• Shape: A Shape
• Alternatively:

• Filter type: Spin-on Filter
• Height [mm]: 126
• Thread Size: M 24 X 1.5
• Outer Diameter [mm]: 102
• Supplementary Article/Info 2: with one anti-return valve
• Outer Diameter 2 [mm]: 80
• Inner Diameter 2 [mm]: 72
• Name: OLIFILTER
• Manufacturer: MAX

• Filter type: Filter Insert
• Height [mm]: 121
• Outer Diameter [mm]: 221
• Name: Ohufilter
• Manufacturer: MAX

• Height [mm]: 281
• Inner Diameter [mm]: 86
• Outer Diameter [mm]: 146
• Filter type: Filter Insert
• Inner Diameter 1 [mm]: 31
• Manufacturer: DRIVE

• Filter type: Filter Insert
• Height [mm]: 281
• Inner Diameter [mm]: 86
• Outer Diameter [mm]: 146
• Name: OHUFILTER
• Manufacturer: MAX

• Fitting Position: Front
• Length [mm]: 400
• Supplementary Article/Info 2: with vehicle-specific adaptor
• Manufacturer: MAGNETI MARELLI

• Filter type: Spin-on Filter
• Height [mm]: 127
• Thread Size: M24x1.5
• Outer Diameter [mm]: 98
• Inner Diameter 1 [mm]: 79
• Inner Diameter 2 [mm]: 71
• Bypass Valve Opening Pressure [bar]: 1
• Weight [kg]: 0.71
• Manufacturer: VALEO
• Name: VA 586044

• Height [mm]: 121.5
• Thread Size: M 24 X 1,5
• Outer Diameter [mm]: 102
• Outer Diameter 1 [mm]: 104
• Outer Diameter 2 [mm]: 79
• Inner Diameter 1 [mm]: 71
• Bypass Valve Opening Pressure [bar]: 1
• Supplementary Article/Info 2: with one anti-return valve
• Filter type: Spin-on Filter
• Manufacturer: SOFIMA

• Fitting Position: Front
• Quantity Unit: Kit
• Length 1 [mm]: 400
• Length 2 [mm]: 400
• Wiper blade type: Bracket wiper blade without spoiler
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: BOS

• Filter type: Spin-on Filter
• Height [mm]: 127
• Thread Size: M24x1.5
• Outer Diameter [mm]: 102
• Inner Diameter 1 [mm]: 79
• Inner Diameter 2 [mm]: 71
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 103
• Seal Diameter [mm]: 80
• Thread Size: M24x1,5
• Height [mm]: 126
• Manufacturer: HENGST FILTER

• Filter type: Spin-on Filter
• Height [mm]: 120
• Thread Size: M 26 x 1,5
• Outer Diameter [mm]: 93
• Seal Ring Outer Diameter: 88
• Gasket inner diameter: 81
• Manufacturer: BOSCH

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 103
• Thread Size: M24X1,5
• Height [mm]: 125
• Name: Oil filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
LAND CRUISER 80 (/J8
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
LAND CRUISER 80 (/J8
(kvaliteediklass: PJ)"

• Height [mm]: 283
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 146
• Packing Type: Box
• Filter type: Filter Insert
• Packaging length [cm]: 10.8
• Packaging width [cm]: 10.8
• Packaging height [cm]: 10.9
• Name: CH CAF100470C
• Manufacturer: CHAMPION

• Filter type: Filter Insert
• Height [mm]: 280
• Outer Diameter [mm]: 146
• Inner Diameter 1 [mm]: 86
• Diameter 3 [mm]: 32
• Packaging length [cm]: 15
• Packaging width [cm]: 15
• Packaging height [cm]: 29
• Net Weight [g]: 717
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN LX941

• Filter type: Spin-on Filter
• Gasket inner diameter: 72
• Seal Ring Outer Diameter: 80
• Height [mm]: 126
• Thread Size: M24x1.5
• Outer Diameter [mm]: 102
• Supplementary Article/Info 2: with one anti-return valve
• Bypass Valve Opening Pressure [bar]: 1
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Filter type: Filter Insert
• Height [mm]: 281
• Outer Diameter 1 [mm]: 146
• Outer Diameter 2 [mm]: 146
• Inner Diameter 1 [mm]: 86
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Height [mm]: 281
• Outer Diameter [mm]: 146
• Outer Diameter 1 [mm]: 146
• Outer Diameter 2 [mm]: 146
• Inner Diameter [mm]: 86
• Inner Diameter 1 [mm]: 86
• Inner Diameter 2 [mm]: 30
• Weight [kg]: 0.81
• Manufacturer: VALEO

• Filter type: Filter Insert
• Height [mm]: 121
• Outer Diameter [mm]: 221
• Weight [kg]: 0.88
• Name: OHUFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Height [mm]: 281
• Inner Diameter [mm]: 86
• Outer Diameter [mm]: 146
• SVHC: No SVHC present!
• Name: OHUFILTER
• Manufacturer: MAN

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 12
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Engine Code: 2L-T
• ACEA specification: A3/B4, A3/B3
• API specification: SL, CF
• Recommended change interval [years]: 1
• Capacity [litre]: 5
• Observe the vehicle manufacturer specifications:
• Packing Type: Canister
• Observe system fill quantity:
• SAE viscosity class: 10W-40
• Width [mm]: 115
• Height [mm]: 230
• Length [mm]: 300
• Weight [kg]: 4.6
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 100
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 21
• Thickness [mm]: 1.6
• Material: Aluminium
• Shape: A Shape

• Fill quantity [l]: 2.4
• Oil - manufacturer recommendation: Volvo 97341

Specification: Allison C-4, Ford Mercon, GM Dexron IIIH, GM/Opel 19 40 707, MAN 339 Type V2, MAN 339 Type Z3, MB 236.6, Voith 55.6335, Volvo 97341, VW G 052 162, ZF TE-ML 02F/11B/14C, ZF TE-ML 04D/09/14B/

• Fill quantity [l]: 2.4
• Oil - manufacturer recommendation: Idemi

Specification: SP-III & Dia Queen, Allison C-4/TES 295/, ATF LT 71141, Dexron III H, DiaQueenJ2, ETL 7045E, Ford Mercon, Ford Mercon V, Ford WSS-M2C138-CJ, Ford WSS-M2C166-H, Ford WSS-M2C202-B, GM Dexron IID, GM Dexron III, Honda Z1 (except CVT, Hyundai/Mitsubishi S, I, Idemi, Idemitsu K17, Isuzu bes, Mitsubishi SP, SP-II, SP-III

• Fill quantity [l]: 2.4
• Oil - manufacturer recommendation: MAN Typ Z1/V1

Specification: Allison C-4, Caterpillar TO-2, Ford Mercon, GM Dexron IIIG, MAN 339 Type V2, MAN 339 Z-2, MAN Typ Z1/V1, MB 236.1, Voith 55.6335, Volvo 97341, ZF TE-ML 02F/03D/09/, ZF TE-ML 04D/14A

• Fill quantity [l]: 6.9
• Specification: API SF/CD
• SAE viscosity class: 10W-30
• Oil - manufacturer recommendation: MIL-L-46152C

• Fill quantity [l]: 2.4
• Oil: Mineral Oil
• Oil - manufacturer recommendation: Dexron III F

Specification: Caterpillar TO-2, Ford Mercon, MAN 339 Type V2, MAN 339 Z-2, Volvo 97341, ZF registration no.0, ZF TE-ML 04D, ZF TE-ML 04D/14A, ZF TE-ML 14A

• Fill quantity [l]: 2.4
• Oil: Full Synthetic Oil
• Oil - manufacturer recommendation: MB 236.41

Specification: GM Dexron III, MB 236.41, Mercon LV, Mercon SP, Toyota Type WS (JWS