• Thickness [mm]: 2.5
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 21
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1,75
• Length [mm]: 25
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Material: Steel
• Length [mm]: 37
• Thread Length [mm]: 17
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Surface: Zinc-coated
• Thread Size: M12 x 1,75
• Quality/ Grade: 5.8
• for OE number: 11519933
• Manufacturer: DELLO AUTOMEGA

• Inner Diameter [mm]: 10.8
• Outer Diameter [mm]: 20.8
• Thickness [mm]: 2.6
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: ELR

• Length [mm]: 27.5
• Thread Size: M12x1,72
• Manufacturer: 3RG

• Length [mm]: 25
• Weight [kg]: 0.039
• Thread Size: M 12 x 1,75
• Packing Type: Blister Pack
• Weight [g]: 39
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METALCAUCHO

• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: with seal ring
• Name: Sulgurkruvi, olivann
• Manufacturer: DRM

• Engine Code: LT1(376CUV8)
• Thickness [mm]: 2.5
• Width [mm]: 11
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: AJU

• Thread Size: M12x1,75x17
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: with seal ring
• Always compare old and new part (in particular OE No.):
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Surface: Zinc-coated
• Spanner Size: 15
• Supplementary Article/Info 2: with seal ring
• Length [mm]: 37
• Thread Pitch [mm]: 1.75
• Fitting Position: engine sided
• Thread Size: M12 x 1,75
• Thread Length [mm]: 25
• Bolt Head-/Nut Design: Male Hex
• Weight [kg]: 0.039
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 37
• Outer Diameter [mm]: 27
• External Thread Size: M12 x 1,75
• Thread Length [mm]: 17
• Quality/ Grade: 5.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 25
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12x1,75
• Length [mm]: 18
• Supplementary Article/Info 2: with seal ring
• Name: FI 257862.001
• Manufacturer: FA1

• Length [mm]: 37
• Outer Diameter [mm]: 27
• External Thread Size: M12 x 1,75
• Thread Length [mm]: 17
• Quality/ Grade: 5.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 25
• Weight [kg]: 0.039
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 40 94 4442

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Steel
• Thread Size: M12x1,75
• Length [mm]: 38
• Screw length below head [mm]: 25
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 15
• Seal Material: Rubber
• Packing Type: Bag
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Length [mm]: 37
• Outer Diameter [mm]: 27
• External Thread Size: M12 x 1,75
• Thread Length [mm]: 17
• Quality/ Grade: 5.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 25
• Weight [kg]: 0.039
• Supplementary Article/Info 2: with seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: DRM

Name: USZCZELKA —RUBY SPUSTU OLEJU 10.8X20.8X2.6 GUM. 5 SZT.

• Thread Size: M12 x 1,75
• Screw length below head [mm]: 24
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 15
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12x1,75x17
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 21
• Thickness [mm]: 2.5
• Material: NBR (nitrile butadiene rubber)

• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 21
• Thickness [mm]: 2.5
• Alternatively:
• Material: NBR (nitrile butadiene rubber)