Lisainfo: (AM)

• Engine Code: LY4
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: LY4
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: LY4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Pressure [bar]: 0.3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Thread Size: 1/8x28 BSP
• Pressure [bar]: 0.35
• Manufacturer: FAE

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Pressure [bar]: 0.3
• Housing Colour: black
• Thread Size: 1/8
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: oil pressure sensor
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Surve (bar): 0,35
• Keermemõõt: 1/8x28 BSP
• Manufacturer: JPN

• Construction Year to: 04.2008
• Manufacturer: BOSCH

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 90411977
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 3
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Thread Size: M14x1.5
• Manufacturer: VERNET

• Length [mm]: 51
• Fabrication Number: ECP-DW-006
• Manufacturer: NTY

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: LY4
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: LY4
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Name: DE TS10462
• Manufacturer: DELPHI

• Number of connectors: 2
• Colour: grey
• Weight [kg]: 0.03
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Quantity: 1
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Quantity: 1
• Number of pins: 2
• Housing Colour: black
• Thread Size: M 14X1.5-6g
• Spanner Size: S21
• Name: DE TS10527
• Manufacturer: DELPHI

• Number of pins: 3
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 235
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168791
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 01.2005
• Required quantity: 1
• Vehicle type: Kalos
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 325
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550284
• Manufacturer: ERA

• Engine Code: LY4
• Required quantity: 1
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Cable Length [mm]: 275
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Fitting Depth [mm]: 24
• Rated Voltage [V]: 12
• Number of connectors: 3
• Number of mounting bores: 1
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP190.01
• Manufacturer: SNR

• Engine Code: LY4
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI
• Additional information: MD60084
• Lisainfo: MD60084

• Quantity: 1
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Required quantity: 1
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 690
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.1
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Length [mm]: 470
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-DW-000
• Manufacturer: NTY

• Cable Length [mm]: 480
• Oxygen Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-DW-002
• Manufacturer: NTY

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-DW-001
• Manufacturer: NTY

• Vehicle type: Aveo, Kalos
• Block Separation:
• Number of pins: 3
• Cable Length [mm]: 285
• Fitting Depth [mm]: 38.3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Quantity: 1
• Cable Length [mm]: 275
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Engine Code: LY4
• Required quantity: 1
• Length [mm]: 350
• Name: EP 1.957.052
• Manufacturer: EPS

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Quantity: 1
• Emission Standard: Euro 4 (D4)
• Number of connectors: 4
• Length [mm]: 375
• Manufacturer: VERNET

• Engine Code: LY4
• Construction Year from: 02.2005
• Construction Year to: 04.2008
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Finger-type Sensor Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: LY4
• Fitting Position: after catalytic converter
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.559
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Emission Standard: Euro 3
• Fitting Position: after catalytic converter
• Block Separation:
• Quantity: 1
• Cable Length [mm]: 480
• Manufacturer: DELPHI
• Name: DE ES20037-12B1

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: after catalytic converter
• Cable Length [mm]: 290
• Manufacturer: DELPHI
• Name: DE ES21325-12B1

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Block Separation:
• Quantity: 1
• Cable Length [mm]: 500
• Name: DE ES21186-12B1
• Manufacturer: DELPHI

• Engine Code: LY4
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Length [mm]: 470
• Cable Length [mm]: 500
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Length [mm]: 370
• Resistor [Ohm]: 6
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 370
• Oxygen Sensor: Heated
• Name: Lambda andur
• Manufacturer: MAG

• Construction Year to: 08.2007, 04.2008
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• for OE number: 96 291 099, 96419957
• Block Separation:
• Construction Year from: 02.2005
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Emission Standard: Euro 4 (D4)
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Exhaust Manifold
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Number of circuits: 4
• Number of connectors: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.11
• for OE number: 96291099
• Observe service information:
• Name: LAMBDA ANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.