• Fitting Position: Front Axle Right
• paired article number: 1144600870
• Manufacturer: JP GROUP
• Lisainfo: Tie rod end, right
• Additional information: Tie rod end, right

• Fitting Position: Front Axle Left
• paired article number: 1144600880
• Manufacturer: JP GROUP
• Lisainfo: Tie rod end, left
• Additional information: Tie rod end, left

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Tie rod, left/right
• Additional information: Tie rod, left/right

• Fitting Position: Rear Axle, both sides, Rear Axle Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.231
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right, outer
• Fabrication Number: SKZ-VW-008
• paired article number: SKZ-VW-007
• Manufacturer: NTY
• Name: NTY SKZ-VW-008

• Fitting Position: Front Axle Left, outer
• Fabrication Number: SKZ-VW-007
• paired article number: SKZ-VW-008
• Manufacturer: NTY
• Name: NTY SKZ-VW-007

• Fitting Position: Front Axle Right
• Length [mm]: 93
• Cone Size [mm]: 13
• paired article number: 9010262
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Length [mm]: 93
• Cone Size [mm]: 13
• paired article number: 9010263
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Fabrication Number: SDK-VW-003
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M16x1.5
• External Thread [mm]: M12x1.5
• Thread Type: with right-hand thread, with internal thread
• Length [mm]: 95
• Thread Size 1: M16x1.5
• paired article number: SR9606
• Manufacturer: BGA

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• External Thread [mm]: M16x1,5
• Internal Thread [mm]: M16x1,5
• Length [mm]: 311
• Manufacturer: MERTZ

• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• Quality class: PJ
• Name: Tie rod end left

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• Quality class: PJ
• Name: Tie rod end right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Axle Joint Thread Type: with right-hand thread
• Axle Joint Length [mm]: 288
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M16x1.5
• Manufacturer: BGA

• Fitting Position: Front Axle Left
• Internal Thread [mm]: M 16 x 1,5
• Supplementary Article/Info 2: with nut
• paired article number: 110 174
• External Thread [mm]: M 12 x 1,5
• Length [mm]: 95
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Overall Length [mm]: 334
• External Thread 1 [mm]: M 16
• Thread Pitch 1 [mm]: 1.5
• External Thread 2 [mm]: M 16
• Thread Pitch 2 [mm]: 1.5
• Supplementary Article/Info 2: with nut
• DIN standards (Nuts): DIN 936 (thin hexagon nuts)
• Spanner Size: 24
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M 16 x 1,5
• Supplementary Article/Info 2: with nut
• External Thread [mm]: M 12 x 1,5
• Length [mm]: 95
• paired article number: 110 173
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, inner
• Width [mm]: 36
• Height [mm]: 36
• Weight [kg]: 0.665
• Material: Steel
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Max. Length [mm]: 330
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF V/TOURAN/A3
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF V/TOURAN/A3
(kvaliteediklass: PJ)"

• Fitting Position: 1st front axle right
• Length [mm]: 94
• Thread Size 1: M16x1.5
• Thread Size 2: M12x1.5
• paired article number: 22-91107-2
• Weight [kg]: 0.41
• Name: DY 22-91107-1
• Manufacturer: DYS

• Quantity: 2
• Fitting Position: Front Axle, Front Axle both sides
• Length [mm]: 311
• Weight [kg]: 0.748
• Required quantity: 2
• External Thread [mm]: M16 x 1,5
• General Information: track rod
• Manufacturer: VIKA

• Construction Year from: 01.2013
• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 330
• Thread Size 1: M16x1.5
• Thread Size 2: M16x1.5
• Weight [kg]: 0.77
• Name: DY 24-23867
• Manufacturer: DYS

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 311
• Thread Size 1: M16x1.5
• Thread Size 2: M16x1.5
• Weight [kg]: 0.66
• Name: DY 24-06103
• Manufacturer: DYS

• External Thread [mm]: M 16x1,5
• Fitting Position: Front Axle Right, Front Axle Left
• Name: COC 49398480
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right, outer, Front Axle
• Thread Size: M16x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.3
• paired article number: TA1914
• Length [mm]: 120
• Width [mm]: 40
• Height [mm]: 80
• Manufacturer: DELPHI
• Name: DE TA1915

• Fitting Position: Front Axle Left, outer, Front Axle
• Thread Size: M16x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.3
• paired article number: TA1915
• Length [mm]: 120
• Width [mm]: 40
• Height [mm]: 80
• Manufacturer: DELPHI
• Name: DE TA1914

• Fitting Position: Front Axle Left
• Internal Thread [mm]: M 16x1,5
• paired article number: 49398834
• Thread Type: with right-hand thread
• Name: COC 49398852
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M 16x1,5
• paired article number: 49398852
• Thread Type: with right-hand thread
• Name: COC 49398834
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right
• Rod/Strut: Camber Link
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Rod/Strut: Camber Link
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Thread Size: M16x1,5
• for OE number: 1K0423811J
• paired article number: 9006637
• Manufacturer: SASIC

• Fitting Position: Front Axle Right
• paired article number: 80025AL
• Cone Size [mm]: 13.3, 16.4
• Length [mm]: 95
• Thread Size: M16 x 1,5, M12 x 1,5
• Name: ALT 80024AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left
• paired article number: 80024AL
• Cone Size [mm]: 13.3, 16.4
• Length [mm]: 95
• Thread Size: M16 x 1,5, M12 x 1,5
• Name: ALT 80025AL
• Manufacturer: ALTE AUTOMOTIVE

• Thread Size 1: M16x1.5
• Thread Size 2: M16x1.5
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 332
• Width [mm]: 37
• Height [mm]: 37
• Manufacturer: DELPHI
• Name: DE TA1905

• Fitting Position: Front Axle Right
• Thread Size: M16x1,5
• for OE number: 1K0423812J
• paired article number: 9006638
• Manufacturer: SASIC

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with nut
• Manufacturer: FAST

• Fitting Position: Front Axle
• Weight [kg]: 0.705
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Packaging length [cm]: 34
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• paired article number: 101409
• Length [mm]: 112
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Left
• Weight [kg]: 0.41
• Supplementary Article/Info 2: with self-locking nut
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Fitting Position: Front Axle, Left
• Length [mm]: 112
• Weight [kg]: 0.41
• Required quantity: 1
• Internal Thread [mm]: M16 x 1,5
• External Thread [mm]: M12 x 1,5
• General Information: tie rod end; left
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Thread Size 1: M16x1,5 A
• Thread Size 2: M16x1,5 A
• Axle Joint Length [mm]: 311
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 840016910

• Quantity: 1
• Fitting Position: Front Axle, Right
• Length [mm]: 112
• Weight [kg]: 0.41
• Required quantity: 1
• Internal Thread [mm]: M16 x 1,5
• External Thread [mm]: M12 x 1,5
• General Information: tie rod end; right
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Length [mm]: 329
• Thread Size 1: M16 x 1,5
• Thread Size 2: M16 x 1,5
• Name: ALT 81164AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left, outer
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 94
• Internal Thread [mm]: M16x1,5
• Thread Size: M12x1,5
• paired article number: JTE1055
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right, outer
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 94
• Internal Thread [mm]: M16x1,5
• Thread Size: M12x1,5
• paired article number: JTE1054
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 311
• Internal Thread Size: M16 x 1,5
• External Thread Size: M16 x 1,5
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.748
• Supplementary Article/Supplementary Info: with lock nut
• for OE number: 1K0 423 810 A
• Manufacturer: SWAG
• Name: SW 32 92 6045

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Cone Size [mm]: 13.4
• Thread Size: M16X1,5
• paired article number: 840 1154 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle Right
• Cone Size [mm]: 13.4
• Thread Size: M16X1,5
• paired article number: 840 1153 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with accessories
• Axle Joint Length [mm]: 292
• Overall Length [mm]: 331
• Thread Size: M16x1,5
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides, inner
• Thread Type: with right-hand thread
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Axle Joint Length [mm]: 288
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Length [mm]: 94
• Thread Size 1: M12x1,5
• Thread Size 2: M16x1,5
• reinforced version:
• replacement in pairs recommended:
• with environmental seal: Carbon neutral
• Required quantity: 1
• paired article number: 116 020 0025/HD
• Manufacturer: MEYLE

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: Front Axle, Right
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 35281 02
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Right
• General Information: ball joint; right; with screw
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle, Left
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 35282 02
• Manufacturer: LEMFÖRDER
• Name: LMI 3528102

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Front Axle both sides
• Quantity: 2
• External Thread [mm]: M16 x 1,5
• Weight [kg]: 0.748
• Length [mm]: 311
• Required quantity: 2
• General Information: tie rod
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle, Front Axle Left
• Quantity: 1
• General Information: tie rod end; left
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle, Front Axle Right
• Quantity: 1
• General Information: tie rod end; right
• Manufacturer: BORSEHUNG