• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Rear Axle Left, Rear Axle Right
• Lisainfo: Support for shock absorber, rear, upper
• Additional information: Support for shock absorber, rear, upper

• Fitting Position: Front Axle
• Suspension: for vehicles with increased ground clearance

• Fitting Position: Rear Axle
• Manufacturer: JP GROUP
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Suspension: for vehicles with electronic suspension control
• for PR number: G53
• Fabrication Number: AD-VW-010
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY

• Fitting Position: Front Axle
• for OE number: 1J0412249
• Manufacturer: SASIC

• Required quantity: 2
• Inner Diameter [mm]: 14
• Fitting Position: Front Axle
• Manufacturer: TEDGUM
• Name: TG 00722859

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 7201592
• Manufacturer: GSP

• for PR number: G53, G54
• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Thickness [mm]: 13.5
• for OE number: 1J0 412 249, 450 330 00 51
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: 3RG

• Fitting Position: Front Axle
• Weight [kg]: 0.091
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left
• Weight [g]: 65
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Name: IM 32295/1
• Manufacturer: ORIGINAL IMPERIUM

• Width [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.08
• Name: Laager - K„„ndmik VW GOLF/PASSAT 91-
• Manufacturer: FEB
• Additional information: FE01111
• Lisainfo: FE01111

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: G10, G14, G72, G73, G54, G74, G79, G13, G53, G70
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 2
• Fitting Position: Front Axle
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Width [mm]: 13.5
• Weight [kg]: 0.08
• Required quantity: 2
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Quality/ Grade: 12, P6
• General Information: deep groove ball thrust bearing; front
• Manufacturer: VIKA

• Model Year from: 2015
• Fitting Position: Front Axle
• Weight [kg]: 0.065
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4.5
• Packaging height [cm]: 1.4
• Manufacturer: FEBEST

• Width [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.08
• Name: SW 30 54 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 13.5
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 82
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, without bearing, front
• Additional information: Bearing for strut, without bearing, front

• Fitting Position: Front Axle
• Bearing Type: Angular Ball Bearing
• Material: Plastic, Metal
• Quantity per axle: 2
• Alternative Repair Kit: 6490035, 6490247
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Alternative Repair Kit: 108 561
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Quantity per axle: 2
• Manufacturer: SKF
• Name: SK VKD35110

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 45
• Inner Diameter [mm]: 14
• Material: Plastic
• for OE number: 1J0 412 249
• Name: Top mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Fabrication Number: AD-VW-006
• Manufacturer: NTY

• Model Year from: 2015
• Suspension: for vehicles with electronic suspension control
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager - K„„ndmik. VW P. GOLF 4 KPL.
• Manufacturer: MAX

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Suspension: for vehicles with electronic suspension control
• for PR number: G53
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik VW GOLF/PASSAT 91-
• Manufacturer: LMI

for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with electronic suspension control
• for PR number: G53
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik VW P. GOLF 91- PASSAT
• Manufacturer: SAA

for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Right, Left, Front Axle
• Outer Diameter 1 [mm]: 65
• Height [mm]: 53
• Outer Diameter 2 [mm]: 82
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF410.82

• Fitting Position: Front Axle
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 13.5
• Bearing Type: Rolling Bearing
• Manufacturer: MEY

Name: Laager - K„„ndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-

• Fitting Position: Right, Left, Front Axle
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 13
• Inner Diameter 1 [mm]: 14
• Name: SN M254.01
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.23
• Required quantity: 2
• Alternative Repair Kit: 80001637
• Supplementary Article/Info 2: without ball bearing
• Name: COC 21652788
• Manufacturer: CORTECO

• Height [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: FEB
• Additional information: FE09227
• Lisainfo: FE09227

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Thickness [mm]: 54
• Weight [kg]: 0.237
• Required quantity: 2
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• General Information: suspension strut storage; front
• Manufacturer: VIKA

• Inner Diameter [mm]: 26
• Height [mm]: 54
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 54 0012

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0412331
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Weight [g]: 285
• Supplementary Article/Info 2: without bearing
• Thickness [mm]: 54
• Name: IM 32354
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: without bearing
• Fabrication Number: AD-VV-003
• Manufacturer: NTY

• Quantity: 2
• Inner Diameter [mm]: 26
• Thickness [mm]: 54
• Outer Diameter [mm]: 83
• Weight [kg]: 0.237
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: suspension strut storage; front
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Support for shock absorber, rear, upper
• Additional information: Support for shock absorber, rear, upper

• Model Year from: 2015
• Fitting Position: Rear Axle
• Diameter [mm]: 16
• Weight [kg]: 0.245
• reinforced version:
• Packaging length [cm]: 20
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 25346 01, 36957 01
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 (BEZ O½YSKA)
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: MEY

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 815008930
• Manufacturer: FAG

• for PR number: 1JA, 1JB, 1JP, 1JS, 1JT
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Housing Type: Aluminium Housing
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Model Year from: 2015
• Fitting Position: Rear Axle
• Weight [kg]: 0.24
• Packaging length [cm]: 20
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 802 270, 802 697
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 9
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Block Separation:
• Manufacturer: JP GROUP

Suspension: for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with electronic suspension control
• for PR number: G53
• Fitting Position: Front Axle
• Weight [kg]: 0.25
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Quantity: 2
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: VIKA

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
SEAT CORDOBA (6K2)
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Block Separation:
• Shape: round

Suspension: for vehicles with bad road version, for vehicles with standard suspension, for vehicles with sports suspension

• Fabrication Number: AD-VV-005
• Manufacturer: NTY

Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle

• Fitting Position: Front Axle
• for OE number: 1H0412303B
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Name: Laager - K„„ndmik. VW T. GOLF 4/B
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: CORTECO
• Name: COC 80001637

• for PR number: 1JA, 1JB, 1JP, 1JS, 1JT
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Quantity per axle: 2
• Replace in pairs only:
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• for OE number: 1J0 513 353 C
• Housing Type: Aluminium Housing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
SKODA FELICIA I (6U1
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: with bearing
• Required quantity: 2
• Height [mm]: 53
• Outer Diameter [mm]: 83
• Centering Diameter [mm]: 14.2
• Manufacturer: TRW

for OE number: 1J0 412 249, 1J0 412 331 B, 1J0 412 331 C, 357 412 249 A, 6K0 413 031 B SVHC: No information available, please contact the manufacturer!

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: VIKA

• not for vehicle type: GTi, WRC
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Thickness [mm]: 54
• Weight [kg]: 0.237
• Required quantity: 2
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• General Information: Repair kit for rubber bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Shape: round
• for OE number: 1J0513425
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

Suspension: for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 1J0412331B
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Weight [g]: 355
• Supplementary Article/Info 2: with ball bearing
• Component Number: 2
• Bearing manufacturer: IMPERGOM
• Name: IM 37241
• Manufacturer: ORIGINAL IMPERIUM

• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: VIKA

• not for vehicle type: GTi, WRC
• Fitting Position: Front Axle
• Name: CFD PK0211
• Manufacturer: DACO

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with sports suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
IBIZA/POLO
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
IBIZA/POLO
(kvaliteediklass: PJ)"

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB657.08

• Model Year from: 2015
• Suspension: for vehicles with electronic suspension control
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Fitting Position: Front Axle both sides
• Supplementary Article/Info 2: without ball bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"

• for OE number: 1J0 513 353 B, 6R0 513 353, 6R0 513 353 B
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quality class: PJ
• Name: Suspension strut support bearing left, right

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without ball bearing
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• not for vehicle type: GTi, WRC
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA