Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: MAX
- Material: Plastic
-
Supplementary Article/Supplementary Info: with spring,
with gasket/ seal - Full Set:
- for OE number: 357198140S
- Manufacturer: DELLO AUTOMEGA
- Housing material: Plastic
- Supplementary Article/Info 2: with seal ring
- for OE number: 026121144F
- Manufacturer: DELLO AUTOMEGA
Manufacturer: 3RG
- Housing material: Plastic
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 055121121F
- Manufacturer: DELLO AUTOMEGA
- Material: Plastic
- Fitting Position: Cylinder Head
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Weight [kg]: 0.02
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of circuits: 2
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- for OE number: 055 121 121F
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Cylinder Head,
transmission sided - Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Water Pump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Thickness [mm]: 3.15
- Inner Diameter [mm]: 36
- Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Full Set:
- Manufacturer: METZGER
- Engine Code: DX
- Diameter [mm]: 32
- for OE number: 055121121F
- Manufacturer: MEAT&DORIA
- for manufacturer number: 7920013
- Manufacturer: KAMOKA
- Weight [kg]: 0.038
- Supplementary Article/Supplementary Info: with retaining spring
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 64
- Width [mm]: 83
- Height [mm]: 58.3
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 2
- Weight [kg]: 0.05
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 50
- Supplementary Article/Info 2: without thermostat
- Manufacturer: METALCAUCHO
- Fitting Position: Left
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Required quantity: 1
-
Fitting Position: Left,
Cylinder Head, transmission sided - Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 037121145
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 45
- Supplementary Article/Info 2: without thermostat
- Name: IM 90186
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Installatsiooni pool: Silindripea,
kastipoolselt - Manufacturer: NRF
- OE-numbri jaoks: 055121121F
- Manufacturer: NRF
- Diameter [mm]: 25
- for OE number: 026121144E
- Manufacturer: MEAT&DORIA
- Material: Plastic
- Weight [kg]: 0.062
- Supplementary Article/Info 2: with seal ring
- for OE number: 055 121 121 F S1
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Weight [kg]: 0.062
- for OE number: 055 121 121 F S1
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 4171
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of circuits: 2
-
Fitting Position: Cylinder Head,
Flywheel side - Manufacturer: VERNET
-
Fitting Position: Cylinder Head,
Left - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Cylinder Head,
Rear - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Plastic
- Weight [kg]: 0.059
- for OE number: 055 121 121 F
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Flantsiühenduste arv: 1
- Installatsiooni pool: Silindripea
- Manufacturer: NRF
- Weight [kg]: 0.05
- Fitting Position: Cylinder Head
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Left,
Cylinder Head, Flywheel side - Manufacturer: VERNET
- Construction Year from: 12.1983
- Weight [g]: 46
- Fitting Position: Cylinder Head
-
Supplementary Article/Supplementary Info: with gasket/
seal - Material: Plastic
- for OE number: 026121144A
- Colour: black
- Number of mounting bores: 2
- Packaging length [cm]: 9.1
- Packaging width [cm]: 9.1
- Packaging height [cm]: 13.5
- Manufacturer: MOTORAD
- Fitting Position: Thermostat
- Manufacturer: VERNET
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks