Lisainfo: Brake pad set, front, 15.3 mm

• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• OE-numbri jaoks: 0J1201511A
• Kõrgus (mm): 171
• Kütuseliik: Bensiin
• Välisläbimõõt [mm]: 75
• Manufacturer: KAMOKA

• Engine Code: DX, JJ
• Construction Year to: 12.1983
• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH
• Name: BS 1987949018

• Outer Diameter [mm]: 72
• Width [mm]: 20
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: CR
• Number of Teeth: 121
• Width [mm]: 18
• Manufacturer: DAYCO
• Name: DA 94017

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• for OE number: 056 109 119 A
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 136
• Välisläbimõõt [mm]: 62
• Välisläbimõõt 1 [mm]: 62
• Keermemõõt: M12x1,5
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: In-Line Filter
• Diameter [mm]: 75
• Height [mm]: 170
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 7.9
• Packaging height [cm]: 17.2
• Net Weight [g]: 223
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Name: KN KL79
• Manufacturer: KNECHT

• Filter type: In-Line Filter
• Diameter [mm]: 75
• Height [mm]: 170
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 7.9
• Packaging height [cm]: 17.2
• Net Weight [g]: 223
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Manufacturer: MAHLE KNECHT

• Width [mm]: 24
• Outer Diameter [mm]: 72
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: KAMOKA

• Driven Units: Camshaft
• Number of Teeth: 121
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTITECH
• Name: CT 637

• Construction Year to: 02.1984
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 121
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,153
• Manufacturer: GATES

• Construction Year to: 07.1983
• Fitting Position: Front Axle
• Width [mm]: 137.8
• Thickness [mm]: 15.3
• Brake System: Volkswagen
• Height 1 [mm]: 48.9
• Height 2 [mm]: 51.5
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 31
• Brake System: VAG
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 31
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 180
• Manufacturer: BREMBO
• Name: BR S 85 507

• Width [mm]: 20
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 72
• Material: Metal
• Weight [kg]: 0.3
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: HSN
• Number of Teeth: 121
• Width [mm]: 18
• Manufacturer: DAYCO
• Name: DA 94737

• Filtritüüp: Keeratav filter
• Kõrgus (mm): 135
• Välisläbimõõt [mm]: 58
• keermemõõt, sissepääs: M14x1.5
• keermemõõt, väljapääs: M12x1.5
• SVHC: SVHS aineid ei esine
• Manufacturer: FILTRON FILTRY

• Fitting Position: Rear Axle
• Construction Year to: 07.1983
• Supplementary Article/Supplementary Info: with lever
• Width [mm]: 31
• Inner brake drum diameter [mm]: 180
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Width [mm]: 20.4
• Outer Diameter [mm]: 72
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 134
• Entry Thread Size: M14x1,5
• Exit Thread Size: M12x1,5
• Packaging height [cm]: 14.6
• Net Weight [g]: 172
• Packaging length [cm]: 5.6
• Packaging width [cm]: 5.6
• Name: KN KL5
• Manufacturer: KNECHT

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 134
• Entry Thread Size: M14x1,5
• Exit Thread Size: M12x1,5
• Packaging height [cm]: 14.6
• Net Weight [g]: 172
• Packaging length [cm]: 5.6
• Packaging width [cm]: 5.6
• Manufacturer: MAHLE KNECHT

• Engine Code: DX, JJ
• Construction Year to: 12.1983
• Kütusesüsteemi seadmed: Bensiini sissepritse
• Filtritüüp: Ühendusfilter
• Läbimõõt [mm]: 64
• Kõrgus (mm): 136
• keermemõõt, sissepääs: M 14 x 1,5
• keermemõõt, väljapääs: M 12 x 1,5
• Manufacturer: BOSCH
• Name: BS 0450905021

• Construction Year to: 07.1983
• Installatsiooni pool: Tagasild
• Laius (mm): 31
• Pidurisüsteem: Ate/Teves
• Piduritrumli läbimõõt seespool [mm]: 180
• Kaal (kg): 1,03
• Manufacturer: TOMEX

• Fitting Position: Rear Axle
• Läbimõõt [mm]: 180
• Laius (mm): 31
• Pidurisüsteem: VAG
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Brake System: VOLKSWAGEN
• Width [mm]: 138
• Height [mm]: 51.3
• Thickness [mm]: 15
• Width 2 [mm]: 138
• Height 2 [mm]: 49.1
• Thickness 2 [mm]: 15
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 20887
• Weight [kg]: 1.06
• Manufacturer: VALEO
• Name: VA 301124

• Width 1 [mm]: 24
• Outer Diameter 1 [mm]: 72
• Manufacturer: SNR
• Name: SN GT357.01

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP571

• Filter type: In-Line Filter
• Height [mm]: 134
• Outer Diameter [mm]: 55
• Packing Type: Carton
• Thread Size 1: M14x1.5
• Thread Size 2: M12x1.5
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 15.3
• Name: CH CFF100203
• Manufacturer: CHAMPION

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 15
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 20960
• Weight [kg]: 0.8
• Manufacturer: VALEO

• Engine Code: DX,JJ
• Filtritüüp: Keeratav filter
• Kõrgus (mm): 131
• Välisläbimõõt [mm]: 74
• Välisläbimõõt 1 [mm]: 81
• keermemõõt, sissepääs: M14x1.5
• keermemõõt, väljapääs: M 12x1,25
• Kaal (kg): 0,279
• Manufacturer: VALEO

• Braking/Driving Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Weight [kg]: 1.14
• Brake System: VAG
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Manual
• Manufacturer: SKF
• Name: SK VKM11000

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LS1276

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D280-7183 D280-7243
• Test Mark: E1 90R-01881/512
• Brake System: Volkswagen
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20887, 20888
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 138.1
• Width 2 [mm]: 137.7
• Height 1 [mm]: 48.2
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI HAMULCE

• Fitting Position: Front Axle
• Brake System: Kelsey - Hayes
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 51.3
• Height 2 [mm]: 49.1
• Wear Warning Contact: excl. wear warning contact
• Vibration: without vibration damper
• Width 1 [mm]: 138
• Width 2 [mm]: 138
• Thickness 1 [mm]: 15
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D206-7126 D280-7209
• Test Mark: E1 90R-01881/513
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20887, 20888
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 48.8
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 19
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP421

• Fitting Position: Front Axle
• Braking/Driving Dynamics: for vehicles without ABS
• Width 1 [mm]: 137.6
• Height 1 [mm]: 48.8
• Thickness 1 [mm]: 19.3
• Width 2 [mm]: 137.6
• Height 2 [mm]: 51.1
• Thickness 2 [mm]: 19.3
• Brake System: KELSEY HAYES
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 1.29
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Thickness [mm]: 7.5
• Friction Surface Width [mm]: 29
• Supplementary Article/Supplementary Info: with accessories
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Packaging length [cm]: 19.8
• Packaging width [cm]: 12.5
• Packaging height [cm]: 8.2
• Weight [kg]: 1.1
• Manufacturer: TEXTAR

• Fitting Position: Rear Axle
• Construction Year to: 07.1983
• Quantity per packing unit: 4
• Brake System: VAG
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with lever
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 15,3
• Laius (mm): 137,8
• Kõrgus 1 (mm): 51,2
• Kõrgus 2 (mm): 49
• Piirangutega toode/piirangu info: koos lisadega
• Pidurisüsteem: VAG
• Kaal (kg): 1,08
• Manufacturer: TOMEX

• Vehicle Equipment Line/Variant: TENS
• Belt Pulley Ø [mm]: 72
• Height 1 [mm]: 20.5
• Height 2 [mm]: 27.5
• Weight [kg]: 0.4
• Manufacturer: DAYCO PASKI

• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 5
• Weight [kg]: 1.52
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: E1 90R-01881/513
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20887, 20888
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 50.1
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 19
• Thickness 2 [mm]: 19
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Engine Code: DX, JJ
• Construction Year to: 12.1983
• Fitting Position: Front Axle
• for brake disc diameter [mm]: 239
• for brake disc thickness [mm]: 12
• Supplementary Article/Info 2: with mounting manual
• Article number of recommended accessories: 1987474042, 1987474175, 1987474137
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20887
• Number of springs: 4
• Thickness [mm]: 19.2
• Width [mm]: 137.8
• Height [mm]: 48.3
• Height 2 [mm]: 50.2
• Manufacturer Restriction: Kelsey-Hayes System
• Manufacturer: BOSCH

• Construction Year to: 07.1983
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: with lever
• Test Mark: E1 90R-011043/034
• MAPP code available:
• Article number of recommended accessories: 03.0137-9008.2
• Observe dimensions:
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Brake System: Vag
• Construction Year to: 12.1983
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Width [mm]: 31
• Inner brake drum diameter [mm]: 180
• Manufacturer: METELLI UKL.HAMULCOWY

Lisainfo: Brake shoe set, without E-mark, 180x30 mm

• Engine Code: DX, JJ
• Construction Year to: 12.1983
• Fitting Position: Front Axle
• for brake disc diameter [mm]: 239
• for brake disc thickness [mm]: 10
• Article number of recommended accessories: 1987474003, 1987474137, 1987474051, 1987474042
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20228
• Thickness [mm]: 15
• Width [mm]: 61.9
• Height [mm]: 56.5
• Brake System: ATE
• Manufacturer: BOSCH

• Outer Diameter [mm]: 72
• Width [mm]: 24
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 531006310

• Fitting Position: Rear Axle
• Width [mm]: 31
• Supplementary Article/Supplementary Info: with lever
• Brake System: ATE
• Inner brake drum diameter [mm]: 180
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Construction Year to: 12.1983
• Quantity per packing unit: 4
• FMSI Code: D228-7309 D228-7498
• Test Mark: E1 90R-01878/541
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21144
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.5
• Width 2 [mm]: 87
• Height 1 [mm]: 66.8
• Height 2 [mm]: 66.8
• Thickness 1 [mm]: 16
• Thickness 2 [mm]: 16
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP451

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Width 1 [mm]: 87
• Height 1 [mm]: 52.9
• Thickness 1 [mm]: 15
• Brake System: LUCAS/TRW
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 0.86
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 5
• Weight [kg]: 1.52
• Name: SW 30 90 7013
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Width 1 [mm]: 137.6
• Height 1 [mm]: 48.8
• Thickness 1 [mm]: 15.3
• Width 2 [mm]: 137.6
• Height 2 [mm]: 51.1
• Thickness 2 [mm]: 15.3
• Brake System: KELSEY HAYES
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 1.29
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D1017-7920 D1112-821
• Test Mark: E1 90R-01878/507
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP565
• Additional information: LP565 DELPHI
• Lisainfo: LP565 DELPHI

• Fitting Position: Front Axle
• Construction Year to: 07.1983
• Quantity per packing unit: 4
• Manufacturer Restriction: VAG
• Width [mm]: 137.8
• Height [mm]: 49
• Thickness [mm]: 15.3
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01024/159
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.2
• Units/Pulleys: incl. tensioner pulley
• for OE number: 051 198 119
• Observe service information:
• Name: SW 30 02 0040
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Pulleys contained: 1
• Number of Teeth: 121
• Width [mm]: 18
• Tension pulley diameter [mm]: 83
• for components see parts list:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DX, JJ
• Construction Year to: 12.1983
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake Lining: with lining
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Brake System: LUCAS
• Supplementary Article/Info 2: with bolts/screws, without anti-squeak plate
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 15.2
• Wear Warning Contact: without integrated wear sensor
• Test Mark: ECE-R90
• WVA Number: 20960
• Weight [kg]: 0.89
• Manufacturer: VALEO KLOCKI

• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 5
• Weight [kg]: 1.52
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 137.7
• Height 1 [mm]: 49
• Height 2 [mm]: 51.3
• Thickness [mm]: 15.3
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20887
• Brake System: Kelsey-Hayes
• Article number of recommended accessories: 82026700
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.1
• Manufacturer: TEXTAR
• Quality class: Q
• Name: Brake pads

• Construction Year to: 07.1983
• Fitting Position: Front Axle
• Width [mm]: 137.8
• Height 1 [mm]: 48.9
• Height 2 [mm]: 51.5
• Thickness [mm]: 15.3
• Brake System: Volkswagen
• Test Mark: E9 90R-02A1251/4447
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Construction Year to: 07.1983
• Quantity per packing unit: 4
• Manufacturer Restriction: VAG
• Test Mark: E9 90R-02A0116/5577
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: LUCAS
• Supplementary Article/Info 2: with bolts/screws, without anti-squeak plate
• Width [mm]: 87
• Height [mm]: 52.8
• Thickness [mm]: 16.4
• Wear Warning Contact: without integrated wear sensor
• Test Mark: ECE-R90
• WVA Number: 20960, 23554
• Weight [kg]: 0.94
• Manufacturer: VALEO KLOCKI

• Engine Code: DX, JJ
• Construction Year to: 12.1983
• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 1
• Manufacturer: BOSCH
• Name: BS 1987946321

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: KELSEY HAYES
• Width [mm]: 138
• Height 1 [mm]: 49
• Height 2 [mm]: 51
• Thickness [mm]: 15
• WVA Number: 20887
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 138
• Thickness [mm]: 15
• Height 1 [mm]: 48
• Height 2 [mm]: 49
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• WVA Number: 20887, 20888
• Manufacturer: BREMBO

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: KTB
• Number of Teeth: 121
• Width [mm]: 18
• Length [mm]: 1,153
• Number of belts: 1
• Pulleys contained: 1
• Weight [kg]: 0.6
• Manufacturer: DAYCO
• Name: DA KTB265

• Belt Width [mm]: 18
• Colour: black
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Manufacturer: SKF
• Name: SK VKMA01000

• Number of Teeth 1: 121
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530016210

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth: 121
• Manufacturer: SNR