Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Upper
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for manufacturer number: 7920108
- Manufacturer: KAMOKA
- Heating/Cooling: for vehicles without extra heating
- for PR number: 9M0
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 1K0 122 291C
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Housing material: Plastic
- Colour: black
- for OE number: 03C121118E
- Manufacturer: DELLO AUTOMEGA
- for OE number: 6H121131C
- Supplementary Article/Info 2: without thermostat
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- Housing material: Plastic
- Colour: black
- for OE number: 1K0122291J
- Manufacturer: DELLO AUTOMEGA
- for OE number: 1K0122291C
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 31
- Supplementary Article/Info 2: without thermostat
- Name: IM 90571
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- for manufacturer number: 7920049
- Manufacturer: KAMOKA
-
Engine Code: CAVA,
BWK, CTHA - Construction Year to: 11.2009
- Block Separation:
- Construction Year from: 12.2009
- Vehicle Equipment: for vehicles without electr. auxiliary heater
- for PR number: 9M0
- for OE number: 1K0 122 291 C
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- for manufacturer number: 7920110
- Manufacturer: KAMOKA
- Vehicle Equipment: for vehicles with parking heater
- Production date from: 02.11.2009
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 1K0 122 291R
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: KRàCIEC UKADU CHODZENIA VAG
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Radiator,
Upper - Manufacturer: JP GROUP
- Lisainfo: Coolant Flange
- Additional information: Coolant Flange
-
Fabrication Number: CTM-
VW- 080 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Radiator,
Upper - Supplementary Article/Info 2: with clip
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 1K0 122 291BA
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Housing material: Plastic
- Colour: black
- for OE number: 1K0122291BA
- Manufacturer: DELLO AUTOMEGA
- Engine Code: CAVA
- Diameter 1 [mm]: 9
- Diameter 2 [mm]: 20
- Diameter 3 [mm]: 35
- for OE number: 1K0122291C
- Manufacturer: MEAT&DORIA
- Weight [g]: 34
- Material: Plastic
- for OE number: 1K0122291R
- Colour: black
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
- Quantity: 1
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with fastening clamp
- General Information: Coolant flange
- Manufacturer: VIKA
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Fitting Position: Radiator,
Upper -
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 1K0 122 291BA
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
-
Engine Code: CAVA,
BWK, CTHA - Construction Year from: 11.2009
- Block Separation:
- Weight [kg]: 0.035
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 1K0 122 291 R
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.03
- for OE number: 1K0 122 291 J
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 03C 121 121 E
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.031
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Outer Diameter 1 [mm]: 8
- Inner Diameter 1 [mm]: 4
- Manufacturer: METALCAUCHO
- Quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- Diameter 1 [mm]: 20
- Diameter 2 [mm]: 36
- for OE number: 3B0122291B
- Manufacturer: MEAT & DORIA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 1K0 122 291J
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 3B0122291B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 29
- Supplementary Article/Info 2: without thermostat
- Name: IM 90582
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- for OE number: 1K0122291C
- Manufacturer: NRF
- Weight [kg]: 0.055
- for OE number: 1K0 122 291 BA
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 6H121131C
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 9
- Supplementary Article/Info 2: without thermostat
- Name: Jahutusvedeliku flants
- Manufacturer: IMP
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Consult accessories list for recommended additional repairs:
- Hose Diameter [mm]: 35
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.055
- for OE number: 1K0 122 291 BA
- Supplementary Article/Supplementary Info: with quick coupling
- Name: SW 33 10 6847
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with parking heater
- Production date from: 02.11.2009
- Material: Plastic
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: CAVA,
BWK, CTHA - Construction Year to: 11.2009
- Block Separation:
- Construction Year from: 12.2009
- Vehicle Equipment: for vehicles without electr. auxiliary heater
- for PR number: 9M0
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Outer Diameter 1 [mm]: 8
- Inner Diameter 1 [mm]: 4
- Weight [kg]: 0.031
- for OE number: 1K0 122 291 C
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BWK
- Name: EP 1.660.021
- Manufacturer: EPS
- Weight [kg]: 0.06
- Outer Diameter [mm]: 35
- Supplementary Article/Info 2: without thermostat
- Manufacturer: METALCAUCHO
- Engine Code: BWK
- Manufacturer: FACET
- Consult accessories list for recommended additional repairs:
- Hose Diameter [mm]: 32
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Manufacturer: BGA
- Fitting Position: Thermostat
-
Supplementary Article/Supplementary Info: without gasket/
seal - for OE number: 03C121118D
- Manufacturer: METZGER
- for OE number: 3B0 122 291 B
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Plastic
- Supplementary Article/Info 2: with seal ring
- for OE number: 1K0 122 291 BA
- Fitting Position: Upper
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks