• General Information: temperature sensor
• Manufacturer: VIKA

• Engine Code: BJM
• Fitting Position: Fuel Line
• Supplementary Article/Info 2: without connector parts
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: MAX

• Engine Code: BJM
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: BJM
• Fitting Position: Fuel Line
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Fabrication Number: ECM-AU-001
• Number of pins: 4
• Manufacturer: NTY
• Name: NTY ECM-AU-001

• Engine Code: BJM, CECB
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Fitting Position: Fuel Line
• for OE number: 038 906 081 B, 5033378AA
• Name: Andur, ktusetemperatuur
• Manufacturer: MD

• Housing Type: without housing
• Supplementary Article/Info 2: with bracket, with seal ring
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 330
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of connectors: 4
• Manufacturer: JP GROUP
• Lisainfo: Thrust sensor for intercooler
• Additional information: Thrust sensor for intercooler

• Transmission Type: Manual Transmission
• Fabrication Number: ECS-AU-000
• Manufacturer: NTY

• for OE number: 76 906 433
• Length [mm]: 350
• Fabrication Number: ECP-AU-017
• Manufacturer: NTY

• Cable Cross Section [mm²]: 0.75
• Manufacturer Restriction: VAG
• Socket Width [mm]: 2.8
• Number of pins: 3
• Cable Length [mm]: 250
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV486

• General Information: pressure sensor
• Manufacturer: VIKA

• Sensor Type: Active sensor
• for OE number: 03G 906 433
• Manufacturer: KAMOKA

• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX
• Lisainfo: 21-0216
• Additional information: 21-0216

• for OE number: 038 906 051 C
• Manufacturer: TRUCKTEC

• Connector Shape: D Shape
• Number of pins: 3
• Housing material: Plastic
• Housing Colour: black
• for OE number: 076906051A
• Manufacturer: DELLO AUTOMEGA

Exhaust System: for vehicles with factory fitted soot -/particulate filter, not for vehicles with retro-fitted soot/particulate filter

• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Fitting Position: Fuel Line
• Housing Type: without housing
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: D Shape
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Material: Plastic

Lisainfo: Pressure difference sender for diesel particulate filter Additional information: Pressure difference sender for diesel particulate filter

• Fitting Position: Fuel Line
• Housing Type: with housing
• Housing Colour: black
• Number of pins: 2
• Manufacturer: METZGER

• Cable Length [mm]: 320
• Number of connectors: 3
• Housing Colour: grey
• Manufacturer: JP GROUP
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA VW GOLF 1,9TDI 00-
• Manufacturer: BRM

• Engine Code: BJM, CECB
• Construction Year from: 07.2006, 05.2009
• Vehicle Identification Number (VIN) from: 2E..7..005001
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• for OE number: 07Z 906 051 A
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX
• Lisainfo: 21-0323
• Additional information: 21-0323

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: CALORSTAT BY VERNET

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV137
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

• Engine Code: BJM
• Sensor Type: Active sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: grey
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW POLO 1,9TDI 01-
• Manufacturer: BRM

• Engine Code: CECB, BJM
• Length [mm]: 380
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, with cable
• Cable Length [mm]: 445, 330
• Required quantity: 1
• Sensor Type: Active sensor, Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Housing Colour: black
• Connector Shape: D Shape
• Number of mounting bores: 1
• Socket colour: black
• Weight [kg]: 0.06
• for OE number: 045 957 147 A
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 076 906 051 A
• Manufacturer: TRUCKTEC

• Number of pins: 4
• Pressure from [kPA]: 28
• Manufacturer: DELPHI
• Name: DE PS10117

• Engine Code: BJM
• Vehicle type: Crafter 50
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Length [mm]: 245
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: grey
• Sensor Type: Hall Sensor
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

Manufacturer: FAST

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 550704
• Manufacturer: ERA

• Engine Code: BJM
• Length [mm]: 320
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: BJM
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Quantity: 1
• Construction Year from: 06.2006
• Material: Plastic
• Weight [kg]: 0.02
• Number of connectors: 3
• General Information: pressure sensor
• Manufacturer: VIKA

• Construction Year from: 07.2006
• Number of pins: 3
• Number of connectors: 2
• for OE number: 076 906 051 A
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: BJM
• Fitting Position: Rear
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Required quantity: 1
• Vehicle Identification Number (VIN) from: 2F-9-008 321
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Sensor Type: Hall Sensor
• Cable Length [mm]: 306
• Supplementary Article/Info 2: with protection hose
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter, not for vehicles with retro-fitted soot/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 070 906 088 AA
• Overall Length [mm]: 320
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-VW-054
• Cable Length [mm]: 165

• for OE number: 070 906 088 A
• Overall Length [mm]: 810
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-VW-053
• Cable Length [mm]: 650
• Manufacturer: NTY

• Engine Code: BJM
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Engine Code: BJM, CECB
• Number of pins: 4
• Manufacturer: MEYLE

• Length [mm]: 330
• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Length [mm]: 35
• Width [mm]: 48.5
• Thickness [mm]: 43
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 005 153 50 28
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 70 906 088
• Overall Length [mm]: 620
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Fabrication Number: EGT-VW-049
• Cable Length [mm]: 455
• Manufacturer: NTY

• Engine Code: BJM, CECB
• Construction Year from: 07.2006, 05.2009
• Vehicle Identification Number (VIN) from: 2E..7..005 001
• Block Separation:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• for OE number: 076 906 088 F
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-VW-043
• Cable Length [mm]: 650
• Manufacturer: NTY

• Engine Code: BJM, CECB
• Vehicle Identification Number (VIN) from: 2F-9-008 321
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 076 906 051 A
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• Number of pins: 3
• Cable Length [mm]: 315
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

for model code: Crafter 30, Crafter 35, Crafter 50, Crafter 28, Crafter 46, Crafter 32

• Length [mm]: 350
• Number of connectors: 3
• Cable Length [mm]: 270
• Weight [kg]: 0.035
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 076 906 088 E
• Overall Length [mm]: 425
• Number of pins: 2
• Fabrication Number: EGT-VW-021
• Cable Length [mm]: 280
• Manufacturer: NTY

• for OE number: 076 906 088 C
• Overall Length [mm]: 620
• Number of pins: 2
• Connector Shape: D Shape
• Fabrication Number: EGT-VW-044
• Cable Length [mm]: 475
• Manufacturer: NTY

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 038 906 051 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 350
• Number of connectors: 3
• Cable Length [mm]: 270
• Weight [kg]: 0.035
• Manufacturer: SWAG
• Name: SW 30 93 6115

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: after soot particulate filter
• Component Number: G 527, G 648
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: brown
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Cable Length [mm]: 670
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: before soot particulate filter
• Component Number: G 448, G 495
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: brown
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Cable Length [mm]: 175
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Version: AM
• Article number of recommended accessories: 2324099
• Manufacturer: METZGER

• Fitting Position: after soot particulate filter
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: grey
• Supplementary Article/Info 2: with cable
• Length [mm]: 330
• Manufacturer: FAE

• Construction Year from: 05.2009
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 650
• Overall Length [mm]: 760
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.09
• Manufacturer: VALEO

• Number of pins: 4
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: D Shape
• for OE number: 070 906 088 AA
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Vehicle Identification Number (VIN) from: 2E-7 005 001
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE DPS00002

• for OE number: 2E0 906 461 C
• Manufacturer: KAMOKA

• Housing Type: with housing
• Fabrication Number: EPP-CH-003
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Engine Code: BJM
• Voltage [V]: 12
• Cable Length [mm]: 160
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: EPP-ME-023
• Housing Type: with housing
• Number of pins: 4
• Manufacturer: NTY