• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Water pump
• Additional information: Water pump

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

Additional information: KP25649XS-1 GATES Kaks erinevat pingutusviisi vaata videot https://www.youtube.com/watch?v=4cnIAhmcoEs Lisainfo: KP25649XS-1 GATES Kaks erinevat pingutusviisi vaata videot https://www.youtube.com/watch?v=4cnIAhmcoEs

• Fabrication Number: CPW-VW-051
• Manufacturer: NTY

• Manufacturer Restriction: Citroen, Fiat, Peugeot
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Number of pins: 2
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 175
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, vee tsirkulatsioonipump, eelsoojendi

• for OE number: 03L 121 011
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Number of Teeth: 19
• Name: VEEPUMP
• Manufacturer: MAX

• reinforced version:
• Model Year from: 2009
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.68
• Manufacturer: AKSDASIS

• Construction Year from: 11.2011
• Water Pump Type: for timing belt drive
• Water pump impeller material: Thermoplast
• Supplementary Article/Info 2: with water pump seal ring
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Hammastehulk: 19
• Ventilaatorilabade/labade arv: 8
• Manufacturer: JPN

• Overall Height [mm]: 95
• Number of Teeth: 19
• Water pump impeller material: Sheet Steel
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 2
• Supplementary Article/Supplementary Info: with holder
• Fabrication Number: CPZ-ME-000
• Manufacturer: NTY

• Vehicle Equipment Line/Variant: TB
• for OE number: 03L121011PX
• Belt Pulley Ø [mm]: 56
• Height 1 [mm]: 28.5
• Weight [kg]: 1.1
• Name: DA DP206
• Manufacturer: DAYCO

• Construction Year from: 11.2011
• Rakendustüüp: mehhaaniliselt
• Wasserpumpenausführung: jaoks sõrme-rihmülekandega
• Manufacturer: DRIVE

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exchange Part:
• reinforced version:
• Model Year from: 2009
• Manufacturer: DOLZ
• Name: DO A224

• Construction Year from: 11.2011
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: do not use sealant
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: GRA

• Weight [kg]: 0.722
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Manufacturer: CONTITECH

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: SW 30 93 6048
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Name: VEEPUMP
• Manufacturer: SKF

• Engine Code: CKUB
• Operating Mode: Electric
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA
• Lisainfo: 538006010
• Additional information: 538006010

Manufacturer: BGA

• Operating Mode: Electric
• Etteanne (l/h): 900
• Kaitseaste (IP-kood): IP6K7
• Piirangutega toode/piirangu info: ilma kinnituseta
• Name: Lisaveepump
• Manufacturer: MAX

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 2
• Connector Shape: D Shape
• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: without holder
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• for OE number: 059121012A
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.25
• Number of connectors: 3
• Always compare old and new part (in particular OE No.):
• Name: CE 22SKV053
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.3
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 22SKV066

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: High temperature-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Water pump impeller material: Metal
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Number of blades/vanes: 8
• Impeller Diameter [mm]: 64
• Manufacturer: HEPU

• Pulleys: with belt pulley
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 0.71
• Name: VEEPUMP
• Manufacturer: VAL

• Voltage [V]: 12
• for OE number: 06D121601
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with holder
• for OE number: 2048350364
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: A2118350264
• Connector Shape: D Shape
• Inlet Ø [mm]: 185
• Outlet Ø [mm]: 184
• Material: Plastic
• Operating Mode: Electric
• Plug Type: Male
• Power [W]: 12
• Voltage [V]: 12
• Name: NI 831057
• Manufacturer: NISSENS

• Manufacturer Restriction: PIERBURG
• Operating Mode: Electric
• Manufacturer: DOLZ
• Name: DO EA513A

• Version: 1
• Connector Shape: oval
• Inlet Ø [mm]: 222
• Outlet Ø [mm]: 222
• Material: Plastic
• Operating Mode: Electric
• Plug Type: Female
• Power [W]: 18
• Voltage [V]: 12
• Manufacturer: NISSENS
• Name: NI 831116

• Vehicle Equipment Line/Variant: AUX
• for OE number: 059121012A
• Operating Mode: Electric
• Name: DA DEP1018
• Manufacturer: DAYCO

• Operating Mode: Electric
• Manufacturer: JP GROUP
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: NRF

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Vehicle Equipment: for vehicles with auxiliary water pump
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Pressure [bar]: 0.1
• Flow rate [l/h]: 900
• Protection Type (IP Code): IP6K7
• Supplementary Article/Supplementary Info: without holder
• Name: LISAVEEPUMP
• Manufacturer: BOS

• Operating Mode: Electric
• Name: POMPA WODY VW 2,7TDI/3,0TDI
• Manufacturer: SKF

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: oval
• Housing Colour: black
• Hose Diameter [mm]: 20
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer Restriction: PIERBURG
• Observe system fill quantity:
• Always compare old and new part (in particular OE No.):
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Flow rate [l/h]: 900
• Pressure [bar]: 0.1
• Quality: OE EQUIVALENT
• for OE number: 0392023004
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Operating Mode: Electric
• Weight [kg]: 0.4
• Packaging length [cm]: 14
• Packaging width [cm]: 13
• Packaging height [cm]: 11

• Operating Mode: Electric
• Voltage [V]: 12
• Weight [kg]: 0.3
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 8
• for OE number: 059121012A, 95510631200

• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Operating Mode: Electric
• Manufacturer: GATES

• Voltage [V]: 12
• Number of connectors: 3
• Operating Mode: Electric
• Weight [kg]: 0.21
• for OE number: 059 121 012 A
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CKUB, CSNA
• Block Separation:
• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: A 204 835 03 64
• Diameter 1 [mm]: 20
• Diameter 2 [mm]: 20
• Flow rate [l/min.]: 12
• Name: LISAVEEPUMP
• Manufacturer: PIE

• Rakendustüüp: elektriline
• Pinge [V]: 12
• OE-numbri jaoks: 059 121 012 A
• Manufacturer: HEPU

• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 4
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Engine Code: CKUB
• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: HT -CKUB # CK
• Number of Teeth: 160
• Width [mm]: 25
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY
• Additional information: KTBWP7880 DAYCO
• Lisainfo: KTBWP7880 DAYCO

• Engine Code: CKUB
• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Observe service information:
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA
• Lisainfo: 530055032
• Additional information: 530055032

• Engine Code: CKUB
• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Observe service information:
• Name: SW 30 94 5116
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Number of tension rollers: 1
• Number of deflection pulleys: 3
• Supplementary Article/Info 2: with bolts/screws
• Supplementary Article/Supplementary Info: with camshaft screws
• Manufacturer: HEPU

• Construction Year from: 11.2011
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Manufacturer: METELLI ROZRZAD

• Driven Units: Camshaft
• Engine Code: CKUB, CKUC, CSNA
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.622
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Driven Units: Camshaft, Oil Pump
• Engine Code: CKUB, CKUC, CSNA
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Weight [kg]: 2.752
• Width 1 [mm]: 25
• Width 2 [mm]: 9.2
• 2 Belts:
• Number of Teeth 2: 59
• Number of Teeth 1: 160
• Supplementary Article/Supplementary Info: with camshaft screws
• Engine Timing: Timing belt in the oil bath
• Name: Veepump hammasrihmakomplekt
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)