Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)


-
Fitting Position: Rear Axle Left,
Rear Axle Right -
for vehicles with gross vehicle weight [kg]: 3,
000, 3, 500 - Quantity per packing unit: 2
- Rod/Strut: for coupling rod
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 26
- Inner Diameter [mm]: 12
- Width [mm]: 26
- Replace in pairs only:
-
Name: Puks -
Kndmik DB P. 207 - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 26.6
- for OE number: 6013210350
-
Name: Puks -
Kndmik DB P. 207- 408 - Manufacturer: SAS




























































- Quantity per packing unit: 10
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.




























































-
Fitting Position: both sides,
Rear Axle - Control/Trailing Arm Type: for control arm
- Length [mm]: 36
-
Material: Rubber/
Metal - Outer Diameter [mm]: 32
-
Mounting Type: Rubber-
Metal Mount - Axle alignment required after fitting:
- Inner Diameter [mm]: 12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



-
Engine Code: BJM,
CECB - Vehicle Identification Number (VIN) from: ******2E*C*000001
-
for PR number: 0WF,
0BB, 0BC, 0BD - Block Separation:
- Length [mm]: 36
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.082
-
Name: Puks -
Kndmik DB P. / T. 507D- 8 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



-
Engine Code: BJM,
CECB - Vehicle Identification Number (VIN) from: ******2E*C*000001
-
for PR number: 0WF,
0BB, 0BC, 0BD - Block Separation:
- Length [mm]: 36
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.082
- Name: SW 10 79 0060
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




- Fitting Position: Rear Axle
- Manufacturer: FAST




- Length [mm]: 52
- Inner Diameter [mm]: 21
- Width [mm]: 49
- Height [mm]: 42
- Weight [g]: 70
- Fitting Position: Front Axle
- Manufacturer: FAST



- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle,
Front Axle Right -
Fabrication Number: ZLP-
ME- 002 -
paired article number: ZLP-
ME- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.



- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle,
Front Axle Left -
Fabrication Number: ZLP-
ME- 001 -
paired article number: ZLP-
ME- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Pipe Diameter [mm]: 10
- paired article number: 9030223
- Manufacturer: KAMOKA





- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Pipe Diameter [mm]: 10
- paired article number: 9030224
- Manufacturer: KAMOKA






- Installatsiooni pool: esisild paremal
- Õõtshoovad: Stabilisaatori otsavarras
- Pikkus (mm): 138
-
Väliskeere [mm]: M12x1,
5 - Materjal: Metall
- Välisläbimõõt [mm]: 10
- Piirangutega toode/piirangu info 2: koos mutriga
-
paaris tootenumbrid: M-
S0050 - Manufacturer: MERTZ






- Installatsiooni pool: esisild vasakul
- Õõtshoovad: Stabilisaatori otsavarras
- Pikkus (mm): 138
-
Väliskeere [mm]: M12x1,
5 - Materjal: Metall
- Välisläbimõõt [mm]: 10
- Piirangutega toode/piirangu info 2: koos mutriga
-
paaris tootenumbrid: M-
S0051 - Manufacturer: MERTZ



-
Vehicle type: Crafter30-
35 -
Gross vehicle weight [kg]: 3,
500 - Rod/Strut: Suspension Rod
- Material: Steel
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Name: Stabilisaator,
Stabilisaator - Manufacturer: MAX


-
Fitting Position: Front Axle Right,
outer - Rod/Strut: Suspension Rod
- Diameter [mm]: 10
- Thread Size: MM12X1.5
- Manufacturer: OYODO

- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Length from [mm]: 138
- Outer Diameter [mm]: 10
-
External Thread Size: M12 x 1,
5 - Material: Aluminium
- Name: Stabilizer link left
- Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"


- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Weight [kg]: 0.326
- Length [mm]: 138
- Required quantity: 1
-
External Thread [mm]: M12 x 1,
5 - Material: Metal
- Outer Diameter [mm]: 10
- General Information: coupling rod; front left
- Manufacturer: VIKA





- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 213
- Manufacturer: KAMOKA


- Fitting Position: Rear Axle Right
- paired article number: S050295
- Length [mm]: 138
- Rod/Strut: Push Rod
-
Thread Size 1: M12X1,
5 - Manufacturer: GSP


- Fitting Position: Rear Axle Left
- paired article number: S050296
- Length [mm]: 138
- Rod/Strut: Push Rod
-
Thread Size 1: M12X1,
5 - Manufacturer: GSP


- Fitting Position: Rear Axle Left
- Length [mm]: 140
- Rod/Strut: Push Rod
- Manufacturer: GSP ZAWIESZENIE


-
Fitting Position: Front Axle Left,
outer - Rod/Strut: Suspension Rod
- Diameter [mm]: 10
- Thread Size: MM12X1.5
- Manufacturer: OYODO


- Fitting Position: Front Axle Left
- Rod/Strut: Suspension Rod
- Length [mm]: 137
- Pipe Diameter [mm]: 10
-
paired article number: 72-
1971 - Manufacturer: MAX
-
Lisainfo: MGZ-
206033 -
Additional information: MGZ-
206033
Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- LE


- Fitting Position: Front Axle Right
- Rod/Strut: Suspension Rod
-
paired article number: 72-
1970 - Manufacturer: MAX
-
Lisainfo: MGZ-
206034 -
Additional information: MGZ-
206034
Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- PR



- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Manufacturer: JP GROUP
-
Lisainfo: Connecting link for stabilizer,
front, right -
Additional information: Connecting link for stabilizer,
front, right



- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Manufacturer: JP GROUP
-
Lisainfo: Connecting link for stabilizer,
front, left -
Additional information: Connecting link for stabilizer,
front, left




- Fitting Position: Rear Axle
- Manufacturer: FAST


- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 185
- Net weight [kg]: 0.44
-
Name: Ootshoovad -
Kndmik DB T. SPRINTER 06- LE/ PR - Manufacturer: NK



- Vehicle type: CRAFTER 50
- Block Separation:
-
for PR number: 0BB,
0BC - for combined PR number: 0BD+1X2
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Lisainfo: Link Stabiliser
- Additional information: Link Stabiliser





















































- Vehicle type: Crafter 30
- Fitting Position: Front Axle Left
- Weight [kg]: 0.4
- Rod/Strut: Suspension Rod
- Manufacturer: FEBEST


- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 140
- Pipe Diameter [mm]: 16
- Inner Diameter [mm]: 12.2
- Name: ALT 93443AL
- Manufacturer: ALTE AUTOMOTIVE



-
Vehicle type: Crafter50,
Crafter46 - Block Separation:
-
for PR number: 0BB,
0BC, 0BD -
Stabiliser Bar Diameter [mm]: 28,
31, 34 -
Installatsiooni pool: Tagasild paremal,
Tagasild vasakul - Õõtshoovad: Stabilisaatori otsavarras
- Pikkus (mm): 140
- Siseläbimõõt 1 [mm]: 12
- Siseläbimõõt 2 (mm): 12
-
Name: Stabilisaator,
Stabilisaator - Manufacturer: MAX


- Fitting Position: Front Axle Right
- Base body material: Steel
- Rod/Strut: Push Rod
- Net weight [kg]: 0.42
- Length [mm]: 140
-
Thread Size: M12x1,
5 -
Thread Size 1: M12x1,
5 - paired article number: G20.5851
- Name: OMG G20.5850
- Manufacturer: OMG


- Rod/Strut: Coupling Rod
-
Left-/right-hand drive vehicles: for left-
hand/ right- hand drive vehicles - paired article number: FT20592
- Fitting Position: Front Axle Left
- Manufacturer: FAST
General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu




- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- paired article number: 5113354
- Length [mm]: 137.5
- Net weight [kg]: 0.41
- Manufacturer: NK
Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- LE




- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- paired article number: 5113353
- Length [mm]: 137.5
- Net weight [kg]: 0.41
- Manufacturer: NK
Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- PR


- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Replace in pairs only:
- Supplementary Article/Info 2: with nut
- Base body material: Steel
- paired article number: 111 651
- Manufacturer: TOPRAN
General Information: Articles with t+ logo are checked by us for completeness and contain all components required for a professional repair


- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Replace in pairs only:
- Supplementary Article/Info 2: with nut
- paired article number: 111 650
- Manufacturer: TOPRAN
General Information: Articles with t+ logo are checked by us for completeness and contain all components required for a professional repair

-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Rod/Strut: Coupling Rod
- Diameter [mm]: 12
- Length [mm]: 212
- Manufacturer: OYODO


- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 212
- Pipe Diameter [mm]: 12
- Inner Diameter [mm]: 12.2
- Name: ALT 83674AL
- Manufacturer: ALTE AUTOMOTIVE


- Fitting Position: Front Axle Right
- Weight [kg]: 0.34
- Rod/Strut: Coupling Rod
- Width [mm]: 68
- Height [mm]: 82
- max. length [mm]: 173
- Material: Steel
-
Thread Size 1: M12x1,
5 -
paired article number: M-
737 - Name: Stabilizer link right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MERC.SPRINTER 06-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
MERC.SPRINTER 06-
(kvaliteediklass: PJ)"


- Fitting Position: Left
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Thread Size 2: M12x1.5
- Manufacturer: PROFIPOWER


- Fitting Position: Front Axle Left
- Weight [kg]: 0.352
- Rod/Strut: Coupling Rod
- Width [mm]: 68
- Height [mm]: 82
- max. length [mm]: 173
- Material: Steel
-
Thread Size 1: M12x1,
5 -
paired article number: M-
736 - Name: Stabilizer link left
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MERC.SPRINTER 06-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
MERC.SPRINTER 06-
(kvaliteediklass: PJ)"


- Fitting Position: Rear Axle
- Weight [kg]: 0.58
- Rod/Strut: Coupling Rod
- Width [mm]: 41
- Height [mm]: 50
- max. length [mm]: 177
- Material: Steel
-
Thread Size 1: 12,
2 - Quality class: PJ
- Name: Stabilizer link left=right
Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"


- Fitting Position: Front Axle Left
- paired article number: 49398722
- Rod/Strut: Guide Rod
- Name: COC 49398738
- Manufacturer: CORTECO


- Fitting Position: Front Axle Right
- paired article number: 49398738
- Rod/Strut: Guide Rod
- Name: COC 49398722
- Manufacturer: CORTECO


-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Length [mm]: 140
- Diameter [mm]: 16
- Rod/Strut: Suspension Rod
- paired article number: 260796
- Weight [kg]: 0.58
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS

-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Rod/Strut: Coupling Rod
- Diameter [mm]: 16
- Length [mm]: 140
- Manufacturer: OYODO


- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Thread Size 2: M12x1.5
- Material: Cast Steel
-
paired article number: 30-
72959 - Weight [kg]: 0.24
-
Name: DY 30-
72958 - Manufacturer: DYS


- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Thread Size 2: M12x1.5
- Material: Cast Steel
-
paired article number: 30-
72958 - Weight [kg]: 0.24
-
Name: DY 30-
72959 - Manufacturer: DYS


- Fitting Position: Front Axle Right
- Thread Size 1: M12x1.5
- Thread Size 2: M12x1.5
- Rod/Strut: Coupling Rod
- paired article number: TC1923
- Width [mm]: 70
- Height [mm]: 70
- Length [mm]: 137
- Manufacturer: DELPHI


- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- for OE number: 2E0411317C
- paired article number: 2306004
- Manufacturer: SASIC


- Fitting Position: Right
- Rod/Strut: Coupling Rod
- Length [mm]: 138
- Thread Size 2: M12x1.5
- Manufacturer: PROFIPOWER


- Fitting Position: Front Axle Left
- Thread Size 1: M12x1.5
- Thread Size 2: M12x1.5
- Rod/Strut: Coupling Rod
- paired article number: TC1924
- Width [mm]: 70
- Height [mm]: 70
- Length [mm]: 137
- Manufacturer: DELPHI
- Name: DE TC1923

- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length 1 [mm]: 138
- Thread Size 1: MM12X1.5R
- Manufacturer: DENCKERMANN ZAWIESZENIE


- Installatsiooni pool: Tagasild mõlemapoolselt
- Õõtshoovad: Stabilisaatori otsavarras
-
Siseläbimõõt [mm]: 12,
2 - Pikkus (mm): 300
-
Kaal (kg): 0,
55 - Manufacturer: RTS


- Installatsiooni pool: Tagasild mõlemapoolselt
- Õõtshoovad: Stabilisaatori otsavarras
- Pikkus (mm): 140
-
Kaal (kg): 0,
58 - Manufacturer: RTS SA


-
Fitting Position: Front Axle Left,
outer - Length [mm]: 138
- Thread Size: MM12X1.5 RHT
- Diameter [mm]: 10
- Rod/Strut: Suspension Rod
- paired article number: 260548
- Weight [kg]: 0.352
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS


-
Fitting Position: Front Axle Right,
outer - Length [mm]: 138
- Thread Size: MM12X1.5 RHT
- Diameter [mm]: 10
- Rod/Strut: Suspension Rod
- paired article number: 260547
- Weight [kg]: 0.34
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS


- Fitting Position: Front Axle Right
- paired article number: VKDS 348019
- Rod/Strut: Coupling Rod
- Manufacturer: SKF
- Name: SK VKDS348020


-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Length [mm]: 212
- Diameter [mm]: 12
- Rod/Strut: Suspension Rod
- paired article number: 260574
- Weight [kg]: 0.372
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS


- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 137
- paired article number: 818 0335 10
- SVHC: No SVHC present!
-
Name: Stabilisaator,
Stabilisaator - Manufacturer: FAG


- Installatsiooni pool: Tagasild mõlemapoolselt
- Õõtshoovad: Stabilisaatori otsavarras
- Pikkus (mm): 213
-
Kaal (kg): 0,
37 - Manufacturer: RTS


- Fitting Position: Front Axle Left
- paired article number: VKDS 348020
- Rod/Strut: Coupling Rod
- Name: SK VKDS348019
- Manufacturer: SKF


- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Supplementary Article/Supplementary Info: with accessories
- Length [mm]: 138
- Thread Size: M10x1.5
- Pipe Diameter [mm]: 10
- paired article number: JTS502
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!


- paired article number: 28481
- Length [mm]: 138
- Outer Diameter [mm]: 10
-
External Thread Size: M12 x 1,
5 - Material: Metal
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Left
- Weight [kg]: 0.326
- Supplementary Article/Supplementary Info: with nuts
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- LE


- paired article number: 28480
- Length [mm]: 138
- Outer Diameter [mm]: 10
-
External Thread Size: M12 x 1,
5 - Material: Metal
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Right
- Weight [kg]: 0.327
- Supplementary Article/Supplementary Info: with nuts
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- PR


- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 137
- paired article number: 818 0336 10
- SVHC: No SVHC present!
-
Name: Stabilisaator,
Stabilisaator - Manufacturer: FAG


-
Fitting Position: Rear Axle Left,
Rear Axle Right -
for vehicles with gross vehicle weight [t]: 3,
500 - Rod/Strut: Coupling Rod
- Weight [kg]: 0.68
- Required quantity: 2
- Length [mm]: 140
- Packaging length [cm]: 21.5
- Packaging width [cm]: 8
- Packaging height [cm]: 8
- Manufacturer: MONROE


- Length [mm]: 246
- Width [mm]: 35
- Thickness [mm]: 35.5
- Rod/Strut: Coupling Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Hole Spacing [mm]: 212.5
- Weight [kg]: 0.395
- Observe service information:
-
Name: Ootshoovad -
Kndmik DB T. SPRINTER 06- LE/ PR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Rear Axle
-
for model code: 30,
35 - Rod/Strut: Coupling Rod
- Width [mm]: 35.5
- Height [mm]: 35
- Length [mm]: 212
- Manufacturer: DELPHI


- Installatsiooni pool: esisild paremal
- Õõtshoovad: Stabilisaatori otsavarras
-
Väliskeere 2 [mm]: M12x1,
5 - Pikkus (mm): 138
-
Kaal (kg): 0,
37 - Manufacturer: RTS










































































- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- Width [mm]: 40
- Height [mm]: 49.5
- Length [mm]: 140
- Name: DE TC6402
- Manufacturer: DELPHI


- Installatsiooni pool: esisild vasakul
- Õõtshoovad: Stabilisaatori otsavarras
-
Väliskeere 2 [mm]: M12x1,
5 - Pikkus (mm): 138
-
Kaal (kg): 0,
37 - Manufacturer: RTS


- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Weight [kg]: 0.42
- paired article number: L10617
- Packaging length [cm]: 21.5
- Packaging width [cm]: 8
- Packaging height [cm]: 8
- Manufacturer: MONROE


- Length [mm]: 246
- Width [mm]: 35
- Thickness [mm]: 35.5
- Rod/Strut: Coupling Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Hole Spacing [mm]: 212.5
- Weight [kg]: 0.395
- Observe service information:
- Name: SW 10 93 7325
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 138
-
Thread Size 1: M12x1,
5 -
Thread Size 2: M12x1,
5 - Required quantity: 1
- replacement in pairs recommended:
- paired article number: 016 060 0038
- Manufacturer: MEY
General Information: Same Product, same durability, new color As a side effect of MEYLE´s optimization of the manufacturing process and the environmental footprint, the product will have a new color. Within the next months, it is possible that the delivered product will be silver or black colored. Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- PR


- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 138
-
Thread Size 1: M12x1,
5 -
Thread Size 2: M12x1,
5 - Required quantity: 1
- replacement in pairs recommended:
- paired article number: 016 060 0039
- Manufacturer: MEY
General Information: Same Product, same durability, new color As a side effect of MEYLE´s optimization of the manufacturing process and the environmental footprint, the product will have a new color. Within the next months, it is possible that the delivered product will be silver or black colored. Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- LE


- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for motor home
- Rod/Strut: Coupling Rod
- Length [mm]: 185
- SVHC: No SVHC present!
- Manufacturer: FAG


-
Vehicle type: Crafter-
50 -
for vehicles with gross vehicle weight above [kg]: 5,
000 - Rod/Strut: Suspension Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Steel
- Article number of recommended accessories: 43385 01
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!


- Length [mm]: 175
- Thickness [mm]: 51
- Material: Steel
- Rod/Strut: Coupling Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.782
- Supplementary Article/Supplementary Info: with nuts
-
Supplementary Article/Info 2: with bolts/
screws - Observe service information:
-
Name: Stabilisaator,
Stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 138
-
Thread Size 1: M12x1,
5 -
Thread Size 2: M12x1,
5 - reinforced version:
- Required quantity: 1
- replacement in pairs recommended:
-
paired article number: 016 060 0038/
HD -
Name: Stabilisaator,
Stabilisaator - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.








- Fitting Position: Front Axle Right
- Rod/Strut: Suspension Rod
- paired article number: 30665 01
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- PR







- Fitting Position: Front Axle Left
- Rod/Strut: Suspension Rod
- Length [mm]: 137
- Pipe Diameter [mm]: 10
- paired article number: 30666 01
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB P. SPRINTER/VW CRAFTER 06- LE


-
Vehicle type: Crafter 50,
Crafter 46 - Block Separation:
-
for PR number: 0BB,
0BC, 0BD -
Stabiliser Bar Diameter [mm]: 28,
31, 34 -
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Coupling Rod
- Length [mm]: 140
- Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 12
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Ootshoovad -
Kndmik DB T. SPRINTER BM906 06- - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.


-
Vehicle type: Crafter 30-
35 -
Gross vehicle weight [kg]: 3,
500 - Rod/Strut: Suspension Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Steel
- Article number of recommended accessories: 37470 01
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. SPRINTER/CRAFTER 06- LE/PR