• Engine Code: CSLC
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• General Information: Pressure difference sensor
• Manufacturer: VIKA

• General Information: Pressure difference sensor
• Manufacturer: VIKA

• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Exhaust System: before soot particulate filter
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 3
• Surve alates (Pa): −14 000
• Surve (Pa) kuni: 100 000
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• General Information: Pressure difference sensor
• Manufacturer: BORSEHUNG

• Engine Code: CSLC
• Fitting Position: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Output Voltage [V]: 5
• Pressure from [kPA]: 100
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Connector Shape: oval
• Colour: black
• Name: SN EGP154.01
• Manufacturer: SNR

Vehicle Identification Number (VIN): [3C-9E079 137;], [3C-9G005 642;], [3C-9P044 381;], [5J-9-A509 526;], [5J-A3006 000;], [5J-AB500 000;], [5J-AK500 000;]

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 03L906051B
• Manufacturer: MEAT & DORIA

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• Engine Code: CSLC
• for OE number: 03L 906 088 HC
• Cable Length [mm]: 690
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.1
• Shape: L Shape
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV397

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Name: DE DPS00020
• Manufacturer: DELPHI

• Exhaust System: before soot particulate filter
• Vehicle type: Crafter 30
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: CZUJNIK CI—N. SPALIN VW GOLF 2,0TDI 14-
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after soot particulate filter
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Fitting Position: after soot particulate filter
• General Information: Sold in Hitachi brand: printing and packaging
• Name: HI 2507410
• Manufacturer: HITACHI

• for OE number: 059906051C
• Manufacturer: MEAT & DORIA

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 13.7
• Manufacturer: DELPHI

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• for OE number: 03L906051D
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 685
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Required quantity: 1
• Fitting Position: before catalytic converter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 427
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• General Information: Exhaust temperature sensor
• Manufacturer: VIKA

• Engine Code: CSLC
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Cable Length [mm]: 750
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-001
• Manufacturer: NTY

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Name: SW 30 10 0853
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before turbocharger
• Length [mm]: 175
• Thread Size: M14 X 1,5
• Number of pins: 2
• Manufacturer: JPN

• Engine Code: CSLC
• for OE number: 03L 906 088 HD
• Overall Length [mm]: 465
• Cable Length [mm]: 380
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Socket colour: beige
• Weight [kg]: 0.08
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV431
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

• Engine Code: CSLC
• Required quantity: 1
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 477
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Required quantity: 1
• Fitting Position: before exhaust turbocharger
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 174
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Fitting Position: before soot particulate filter
• Number of pins: 2
• Cable Length [mm]: 740
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fitting Position: before soot particulate filter
• Cable Length [mm]: 690
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Manufacturer: FAST

• External Thread Size: M14 x 1,5
• Spanner Size: 17
• Number of connectors: 2
• Fitting Position: behind exhaust turbocharger
• Cable Length [mm]: 174
• Weight [kg]: 0.06
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before turbocharger
• Quantity: 1
• Cable Length [mm]: 175
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS30251

• Fitting Position: after soot particulate filter
• Overall Length [mm]: 530
• Cable Length [mm]: 380
• Number of pins: 2
• Connector Shape: D Shape
• Manufacturer: FAST

• Fitting Position: after soot particulate filter
• Number of pins: 3
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: before exhaust turbocharger
• Component Number: G 235
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Sensor Type: NTC Sensor
• Cable Length [mm]: 173
• Spanner Size: 17
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Exhaust System: before soot particulate filter
• for OE number: 03L 906 051 B
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: before catalytic converter
• Number of pins: 2
• Cable Length [mm]: 475
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Fitting Position: before exhaust turbocharger
• Required quantity: 1
• Vehicle type: Crafter 30
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 175
• Name: HE 6PT358181591
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before exhaust turbocharger
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M14 x 1,5
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 03L 906 088 FQ
• Overall Length [mm]: 325
• Shape: straight
• Tightening Torque [Nm]: 45
• Cable Length [mm]: 225
• Sensor Type: PTC
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: before soot particulate filter
• Manufacturer: BOSCH

• Length [mm]: 750
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 750
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM149

• Fitting Position: after soot particulate filter
• Number of pins: 2
• Cable Length [mm]: 430
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Engine Code: CSLC
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.404
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: CSLC
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 500
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Fitting Position: before exhaust turbocharger
• Manufacturer: BOSCH

• Engine Code: CSLC
• Operating Mode: Electric
• Voltage [V]: 12
• Conductor Number: 2
• Cable Length [mm]: 295
• Thread Size: M14 x 1,5 mm
• Fitting Position: before exhaust turbocharger
• Name: Andur, heitgaasitemperatuur
• Manufacturer: PIE

• Oxygen Sensor: Heated
• Conductor Number: 5
• Cable Length [mm]: 740
• Fitting Position: before catalytic converter
• Manufacturer: PIERBURG

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Cable Length [mm]: 805
• Weight [kg]: 0.121
• Name: SW 33 10 4126
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Socket colour: black
• for article number: 77030
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Exhaust System: for pre-catalytic converter
• Block Separation:
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 720
• Manufacturer: DELPHI
• Name: DE ES20541-12B1

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle type: Crafter 30
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.15
• Manufacturer: VALEO
• Name: VA 368417

Oxygen Sensor: Regulating Sensor, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Exhaust System: before catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,14
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV910
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: before exhaust turbocharger
• Corresponds to the original part in colour: black
• Sensor Type: Closed-type Sensor, PTC
• Cable Length [mm]: 195
• Number of pins: 2
• Alternative Repair Kit: 0894114
• Version: IAM
• Manufacturer: METZGER

• Fabrication Number: ENOX-VW-004
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with control unit
• Number of pins: 5
• Supplementary Article/Info 2: with cable
• Connector Shape: oval
• Oxygen Sensor: Thread pre-greased
• Number of mounting bores: 2
• Manufacturer: NTY

• Fitting Position: after catalytic converter
• Name: DRM 02346
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Number of pins: 5
• Rated Voltage [V]: 12
• Thread Size: M 20
• Thread Pitch [mm]: 1.5
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 905
• Sensor Length [mm]: 98
• Spanner Size: 22
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Thread pre-greased
• Number of mounting bores: 2
• Supplementary Article/Supplementary Info: with control unit
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Cable Length [mm]: 590
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.3
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 71SKV072

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Fitting Position: Front
• General Information: NOx sensor; front; 12V
• Manufacturer: VIKA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• General Information: NOx sensor; 12V
• Manufacturer: VIKA

• Fitting Position: after catalytic converter
• Cable Length [mm]: 590
• Number of pins: 5
• Thread Size: M20
• Connector Shape: oval
• Name: DE ANS1023-12B1
• Manufacturer: DELPHI

• Shape: Square
• Number of mounting bores: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: oval
• Number of pins: 5
• Socket colour: black
• for OE number: 03L907807T
• Name: NOx-sensor, NOx-katalsaator
• Manufacturer: MD

• Fitting Position: after catalytic converter
• Thread Size: M20 x 1,5
• Number of connectors: 5
• Manufacturer: METZGER