Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Colour Coding: grey
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
- Length [mm]: 61
- Spanner Size: 19
- Manufacturer: KAMOKA
- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: brown
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
55 - 0, 85 - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: green
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
3 - 0, 6 - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- Colour Coding: green
- Number of connectors: 1
- External Thread [mm]: M10X1
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- for OE number: 95510612500
- Manufacturer: KAMOKA
-
Fabrication Number: ECC-
AU- 003 - Thread Size: M10x1
- Spanner Size: 24
- Supplementary Article/Info 2: with seal ring
- Socket colour: green
- Number of pins: 1
-
Name: NTY ECC-
AU- 003 - Manufacturer: NTY
- Thread Size: M10x1
- Spanner Size: 22
- Colour Coding: green
- Number of pins: 1
- Pressure from [bar]: 0.3
- Pressure to [bar]: 0.6
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Colour Coding: grey
-
Fabrication Number: ECT-
VW- 000 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity: 1
- Construction Year from: 05.2014
- Construction Year to: 05.2014
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: black
- Colour Coding: grey
- General Information: Coolant temperature sensor; black
- Manufacturer: VIKA
-
Connector Shape: oval,
D Shape - Colour Coding: grey
- Sensor Type: NTC Sensor
- Number of pins: 2
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- General Information: Exterior temperature sensor
- Manufacturer: VIKA
- Engine Code: CKUB
- Colour: green
- Pressure to [bar]: 0.6
- Pressure from [bar]: 0.3
- Pressure [bar]: 0.5
- Thread Size: M10x1
- Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Pressure [bar]: 6
- Housing Colour: green
- Thread Size: M10x1.0
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
- Lisainfo: SW90024
- Additional information: SW90024
- Engine Code: CKUB
- Colour: green
- Pressure to [bar]: 0.6
- Pressure from [bar]: 0.3
- Pressure [bar]: 0.5
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET
- Thread Size: M10 x 1
- Spanner Size: 24
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure [bar]: 0.45
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Switch Pressure [bar]: 0.5
- Thread Size: M10x1.0
-
Sensor Type: Open-
style sensor - Manufacturer: VERNET
- Number of connectors: 2
- Manufacturer: 3RG
- Colour Coding: grey
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 2
- for OE number: 06A919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Pressure from [bar]: 0.3
- Pressure to [bar]: 0.6
- Combi Switch Function: Normally Open Contact
- Colour: green
- Spanner Size: 24
-
Thread Size: M10 x 1,
0 - Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Lisainfo: 1148200001
- Additional information: 1148200001
- Thread Size: M 10x1
- Housing Colour: green
- Pressure [bar]: 0.5
- Manufacturer: FAE
- Thread Size: 20 mm
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Additional information: WS2607
- Lisainfo: WS2607
- Pressure [bar]: 0.5
- Thread Size: M10 x 1
- Number of pins: 1
- Technical Information Number: circuit N.O.
- Manufacturer: ERA
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.15
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.3
- Pressure to [bar]: 0.6
- Number of pins: 1
- Corresponds to the original part in colour: green
- Assy./disassy. by qualified personnel required!:
- Name: Olisurvellitus
- Manufacturer: HEL
- Quantity: 1
- General Information: Oil pressure sensor
- Manufacturer: BORSEHUNG
- General Information: Fuel temperature sensor
- Manufacturer: VIKA
- Engine Code: CKUB
-
Fitting Position: Behind the radiator,
Fuel pump to filter -
Thread Size: M12x1,
5 mm - Sensor Type: NTC Sensor
- Number of pins: 2
- Connector Shape: oval
- Guarantee: 3 years guarantee
- Socket colour: black
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV673
- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: green
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CKUB
- Colour: grey
- Block Separation:
- Colour Coding: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Required quantity: 1
- Supplementary Article/Info 2: with clamp holder
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: CKUB
- Colour: grey
- Block Separation:
- Colour Coding: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA
- Number of pins: 2
-
Name: Andur,
ktusetemperatuur - Manufacturer: MAX
- Thread Size: M 10 x 1
-
Control Range [bar]: 0,
3- 0, 6 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: green
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 91 9014
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Housing Colour: grey
- Number of pins: 2
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10278
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: black,
grey - Fitting Depth [mm]: 20
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead -
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Number of pins: 2
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Version: 2
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: 0
- Thread Size: 0
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour Coding: grey
- Corresponds to the original part in colour: black
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Version: IAM
-
Article number of recommended accessories: 0899250,
0905513 - Power [W]: 0.06
- Manufacturer: METZGER
- Quantity: 1
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
- Number of connectors: 2
- Colour Coding: grey
- General Information: Coolant temperature sensor; 2 pin; black; grey
- Manufacturer: BORSEHUNG
- for OE number: 03C 906 433 E
- Length [mm]: 69
- Supplementary Article/Info 2: with screw
-
Fabrication Number: ECP-
AU- 011 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Vehicle Equipment: for vehicles with start-
stop function -
for PR number: 7L0,
7L6 - Number of pins: 2
- Operating Mode: Mechanical
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6DD010966431
- Number of pins: 2
- Manufacturer: FAE
- Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE
- Observe technical data:
- Manufacturer Restriction: VAG
- Number of pins: 2
- Cable Length [mm]: 500
- Cable Cross Section [mm²]: 0.75
- Socket Width [mm]: 1.5
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: +125
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagatuli - Manufacturer: HBE
- Quantity: 1
- Weight [kg]: 0.02
- Width [mm]: 31
- Number of connectors: 3
- Length [mm]: 69
- Colour: black
- Supplementary Article/Info 2: with screw
- Required quantity: 1
- General Information: Crankshaft position sensor; black
- Manufacturer: VIKA
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV507
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.01
- for OE number: 059 919 523 A
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: FEB
- Additional information: FE106318
- Lisainfo: FE106318
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 2F-
H- 000 001 - Cable Cross Section [mm²]: 0.75
- Manufacturer Restriction: VAG
- Socket Width [mm]: 2.8
- Number of pins: 3
- Cable Length [mm]: 250
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
- Manufacturer: HBE
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Engine Code: CKUB
- Number of pins: 3
-
Name: Andur,
vntvoll - Manufacturer: MAX
-
Lisainfo: 24-
0244 -
Additional information: 24-
0244
Manufacturer: NRF
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.01
- for OE number: 059 919 523 A
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 10 6318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 20
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Quantity: 1
- Weight [kg]: 0.02
- Width [mm]: 31
- Number of connectors: 3
- Length [mm]: 69
- Colour: grey
- Supplementary Article/Info 2: with screw
- Required quantity: 1
- General Information: Crankshaft position sensor
- Manufacturer: VIKA
- Engine Code: CKUB
- Manufacturer: FACET
- Check OE number:
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with screw
- Number of pins: 3
-
Name: Andur,
vntvoll - Manufacturer: MEY
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: grey
- Manufacturer: BREMI
- Engine Code: CKUB
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
- Supplementary Article/Info 2: with screw
- for OE number: 03C 906 433 E
- Length [mm]: 31
- Guarantee: 3 years guarantee
- Width [mm]: 29
- Height [mm]: 82
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Sensor Type: Hall Sensor
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 19.5
- Connector Shape: D Shape
- Alternative Repair Kit: 550479
- Rated Voltage [V]: 12
- Manufacturer: ERA
- Engine Code: CKUB
- Number of pins: 3
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- for OE number: 03C906433A
- Manufacturer: MEAT&DORIA
- Number of pins: 3
- Manufacturer: DELPHI ELEKTRONIKA
- Number of pins: 3
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
-
Supplementary Article/Info 2: without cable,
with screw - Quality: OE EQUIVALENT
- for OE number: 0986280421
- Manufacturer: MEAT & DORIA
- Length [mm]: 69
- Width [mm]: 31
- Number of connectors: 3
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with screw
-
Name: ANDUR,
VNTVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 3
- Cable Length [mm]: 390
- Weight [kg]: 0.036
- Name: SW 33 11 1366
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Sensor Type: Hall Sensor
- Connector Shape: D Shape
- Manufacturer: VDO
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Socket colour: grey
- Manufacturer: BRM
Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW AMAROK 10-, CRAFTER 12- 2,0 TDI
- Fitting Depth [mm]: 20
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: with screw
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead, 872- 50- 4; 1- Methyl- 2- pyrrolidone -
Name: Andur,
vntvoll - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Length [mm]: 69
- Width [mm]: 31
- Number of connectors: 3
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with screw
- Name: SW 30 93 7317
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Sensor Type: Hall Sensor
- Version: IAM
- Manufacturer: METZGER
- Number of pins: 3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of connectors: 3
- Cable Length [mm]: 390
- Weight [kg]: 0.036
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
-
Supplementary Article/Info 2: without cable,
with screw - for OE number: 045906433A
- Manufacturer: MEAT&DORIA
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO
- Engine Code: CSNA
- Number of pins: 2
- Connector Shape: oval
- Socket colour: black
- Fitting Position: Suction Pipe
- for OE number: 03N906081A
-
Name: Andur,
sisendohu temperatuur - Manufacturer: MD
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: D Shape
- Manufacturer: FAE
- for OE number: 03C 906 433 E
- Width [mm]: 30
- Height [mm]: 28
- Length [mm]: 80
- Number of pins: 3
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 20
-
Supplementary Article/Info 2: with screw,
without cable - Connector Shape: D Shape
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
- Manufacturer: VALEO
- Engine Code: CKUB
- Required quantity: 1
- Length [mm]: 400
- Manufacturer: FACET
Manufacturer: BOSCH
- Housing Type: with housing
- Housing material: Plastic
- Voltage [V]: 12
- Length [mm]: 110
-
Fabrication Number: EPP-
AU- 016 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.24
- Always compare old and new part (in particular OE No.):
- Name: CE 07SKV159
- Manufacturer: ESEN SKV
- for OE number: 03L 906 461 A
- Manufacturer: KAMOKA
-
Engine Code: CKUB,
CSNA - Required quantity: 1
- Block Separation:
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Fitting Position: before catalytic converter
- Cable Length [mm]: 477
- Number of pins: 5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Oxygen Sensor: Regulating Sensor,
Thread pre- greased - Cable Length [mm]: 750
- Number of circuits: 5
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 750
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Engine Code: CKUB
- Required quantity: 1
- Housing Type: with housing
- Length [mm]: 110
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 80
- Name: EP 1.991.446
- Manufacturer: EPS
-
Engine Code: CKUB,
CSNA -
Oxygen Sensor: Regulating Sensor,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
- Length [mm]: 800
- Name: Lambda andur
- Manufacturer: MAX
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
-
Resistor Type: Hot-
wire Sensor - Number of connectors: 4
- Weight [kg]: 0.18
- Housing Type: with housing
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CKUB
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 500
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.404
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased
- Number of circuits: 5
- Length [mm]: 750
- Conductor Number: 5
- Cable Length [mm]: 750
- Oxygen Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM149
- Oxygen Sensor: Regulating Sensor
- Fitting Position: Front
- Length [mm]: 900
- Number of connectors: 5
- Manufacturer: VERNET
- Engine Code: CKUB
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 500
- Conductor Number: 5
- Number of circuits: 5
- Manufacturer: FACET
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Housing Type: with housing
-
Housing material: Plastic,
PBT, GRP (Glass fibre Reinforced Plastic) - Number of pins: 4
- Connector Shape: rectangular
- Fitting Position: Air Filter Housing
- Number of mounting bores: 2
-
Supplementary Article/Info 2: without seal ring,
with integrated grille - Recommended additional repairs: Air Filter
- Article number of recommended accessories: 113 883
- New Part:
- Used part return not required:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: before catalytic converter
-
Oxygen Sensor: Regulating Sensor,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 6
- Cable Length [mm]: 805
- Weight [kg]: 0.121
- Name: SW 33 10 4126
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: CKUB,
CSNA - Block Separation:
- Operating Mode: Electric
- Voltage [V]: 12
- Manufacturer: PIERBURG
-
Oxygen Sensor: Regulating Sensor,
Broadband Oxygen Sensor, Heated -
Exhaust System: for pre-
catalytic converter - Block Separation:
- Fitting Position: before catalytic converter
- Cable Length [mm]: 720
- Manufacturer: DELPHI
- Engine Code: CKUB
- Fitting Position: before catalytic converter
- Cable Length [mm]: 735
- Conductor Number: 5
- Supplementary Article/Info 2: with fastening material
- Number of circuits: 5
- Name: EP 1.998.374
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Length [mm]: 800
- Number of pins: 6
- Socket colour: black
- Manufacturer: FAE
- Quality: OE EQUIVALENT
- for OE number: 0281002956
- Manufacturer: MEAT&DORIA
-
Oxygen Sensor: Regulating Sensor,
Broadband Oxygen Sensor - Fitting Position: before catalytic converter
- Required quantity: 1
- Vehicle type: Crafter 30
- Cable Length [mm]: 800
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Housing Type: with housing
- Number of pins: 4
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10397-
12B1
- Fitting Position: before catalytic converter
-
Oxygen Sensor: Regulating Sensor,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 6
- Cable Length [mm]: 805
- Weight [kg]: 0.121
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CKUB
- Vehicle type: Crafter 30
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 750
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Exhaust System: before catalytic converter
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV910
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Required quantity: 1
- Vehicle type: Crafter 30
-
Mounting Type: Pipe-
neck - Number of pins: 4
- Suction pipe connector diameter [mm]: 80
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 8ET009149441
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Manufacturer: BREMI
- Required quantity: 1
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 500
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
- Name: VA 368417
Oxygen Sensor: Regulating Sensor, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated
- Construction Year to: 09.2015
- Engine Code: CKUB
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 735
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
- Name: VA 368403
Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: BOS
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Fitting Position: Front
- General Information: NOx sensor; front; 12V
- Manufacturer: VIKA
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- General Information: NOx sensor; 12V
- Manufacturer: VIKA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks