Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Outer Diameter [mm]: 32
- Manufacturer: 3RG
- Outer Diameter [mm]: 32
- Height [mm]: 8.5
-
Name: Sulgurkate,
nukkvoll - Manufacturer: ELR
- Fitting Position: frontal sided
- Engine Code: CKUB
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085C
- Rotation Direction: Clockwise rotation
- Name: FAI OS1663
- Manufacturer: FAI
- Additional information: OS1663 FAI
- Lisainfo: OS1663 FAI
- Engine Code: CKUB
- Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085
-
Swirl Type: Right-
hand Twist -
Version: PTFE POP/
ACM -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Lisainfo: 20036702B CORTECO
- Additional information: 20036702B CORTECO
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Width [mm]: 10
- Outer Diameter [mm]: 47
- for OE number: 03L103085C
- Name: DRM 01294
- Manufacturer: DR.MOTOR AUTOMOTIVE
Brief Information: Always compare old and new part (in particular OE No.)
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Fitting Position: Cylinder Head
-
Swirl Type: Right-
hand Twist -
Sealing lip material: PTFE
(polytetrafluoroethylene) -
Material: ACM
(Polyacrylate) - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CKUB
- Fitting Position: Front
- Height [mm]: 10
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 47
- Manufacturer: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: AW
-
Swirl Type: Right-
hand Twist - Dust Cover: without dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Additional information: 897.690 ELRING
- Lisainfo: 897.690 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: frontal sided
-
Engine Code: CKUB,
CSNA - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Fitting Position: frontal sided,
Cylinder Head - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
-
Material: ACM
(Polyacrylate) - Fitting Position: frontal sided
- Weight [kg]: 0.02
- Observe service information:
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Timing: Timing Belt
- Fitting Position: Exhaust Side
- Number of Teeth: 44
- Outer Diameter [mm]: 132
- Height [mm]: 27.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CKUB
- Construction Year to: 07.2012
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: CKUB,
CSNA - Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
-
Engine Code: CKUB,
CSNA - Block Separation:
- Fitting Position: Intake Side
- Length [mm]: 390
- Diameter [mm]: 57.85
- Name: NUKKVOLL
- Manufacturer: FRE
- Fitting Position: Intake Side
- Manufacturer: BGA
- Fitting Position: Exhaust Side
- Manufacturer: BGA
-
Engine Code: CKUB,
CSNA - Block Separation:
- Fitting Position: Exhaust Side
- Length [mm]: 450
- Diameter [mm]: 57.85
- Name: NUKKVOLL
- Manufacturer: FRE
- Fitting Position: Exhaust Side
- Engine Code: CKUB
- Length [mm]: 449.7
- Name: Nukkvoll
- Manufacturer: MVE
- Engine Code: CKUB
- Version: gegossen
- Fitting Position: Intake Side
- Manufacturer: KOLBENSCHMIDT
- Engine Code: CKUB
- Version: gegossen
- Fitting Position: Exhaust Side
- Name: Nukkvoll
- Manufacturer: KS
-
for OE number: 03L109022,
03L109022D - Fitting Position: Exhaust Side
- Overall Length [mm]: 449.7
- Manufacturer: AMC
- paired article number: 171969
- Fitting Position: Intake Side
- Weight [kg]: 1.99
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CKUB
-
Additionally required articles (article numbers): BFS174S,
R190S - Material: Steel
- for OE number: 03L109021D
- Valve type: for inlet valves
- Name: FAI C347
- Manufacturer: FAI
- Engine Code: CKUB
-
Additionally required articles (article numbers): BFS174S,
R190S - Material: Steel
- for OE number: 03L109022D
- Valve type: for exhaust valves
- Name: FAI C348
- Manufacturer: FAI
- paired article number: 176931
- Fitting Position: Exhaust Side
- Weight [kg]: 2.235
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for OE number: 03L109022,
03L109022D - Fitting Position: Exhaust Side
- Manufacturer: AMC
- Engine Code: CKUB
- Fitting Position: Exhaust Side
- Material: Steel
- Manufacturer: FEDERAL MOGUL
- Engine Code: CKUB
- Fitting Position: Intake Side
- Material: Steel
- Manufacturer: FEDERAL MOGUL
- Fitting Position: Intake Side
- Manufacturer: BGA
- Fitting Position: Exhaust Side
- Manufacturer: BGA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks