• Fitting Position: Front Axle Left, Front Axle Right
• Material: Thermoplast
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle
• Material: Thermoplast
• Height [mm]: 208
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 53
• Manufacturer: GATES

• Fitting Position: Front Axle
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: MAX

• Length [mm]: 210
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 72
• Inner Diameter 2 [mm]: 62
• Weight [kg]: 0.11
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. SPRINTER 06-/CRAFTER

• Fitting Position: Front Axle Right, Front Axle Left
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter 1 [mm]: 72
• Inner Diameter 2 [mm]: 62
• Manufacturer: FAST

• Fitting Position: Front Axle
• Height [mm]: 210
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. SPRINTER 06-/CRAFTER

• Fitting Position: Front Axle
• Height [mm]: 210
• Material: Rubber
• Weight [g]: 142
• Diameter 1 [mm]: 72
• Diameter 2 [mm]: 60
• Name: IM 32137
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Length [mm]: 210
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 72
• Inner Diameter 2 [mm]: 62
• Name: SW 10 94 4882
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Observe service information:
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer! Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. SPRINTER 06-/CRAFTER

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: KAITSEMšTS/KAITSEKUMM,AMORT
• Manufacturer: KYB
• Lisainfo: KYB940003
• Additional information: KYB940003

• Vehicle Equipment Line/Variant: Crafter 46 / 50
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: GSP AMORTYZATOR

• Vehicle type: 30-35
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
MERCEDES SPRINTER/VW CRAFTER 06-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MERCEDES SPRINTER/VW CRAFTER 06-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with lowered suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with standard suspension
• Manufacturer: KAMOKA AMORTYZATORY

• Vehicle type: 50
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
MB SPRINTER 906 06-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MB SPRINTER 906 06-
(kvaliteediklass: PJ)"

• Special Purpose Vehicle: not for motor home
• Vehicle Equipment Line/Variant: Crafter 32 / 35, Crafter 28 / 30
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• for OE number: 2E0513029AC
• Manufacturer: ASHIKA

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

• Special Purpose Vehicle: not for motor home
• Vehicle Equipment Line/Variant: Crafter 32 / 35, Crafter 28 / 30
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• for OE number: 2E0513029AC
• Manufacturer: JAPKO

• Fitting Position: Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• max. length [mm]: 505
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: KAVO

• Vehicle Equipment Line/Variant: Crafter 46 / 50
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Special Purpose Vehicle: not for motor home
• Vehicle Equipment Line/Variant: Crafter 32 / 35, Crafter 28 / 30
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• for OE number: 2E0513029AC
• Name: AMORT
• Manufacturer: JPA

• Vehicle Equipment Line/Variant: Crafter 28 / 30, Crafter 32 / 35
• Special Purpose Vehicle: not for motor home
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

• for OE number: 906 320 0731
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length 1/Length 2 [mm]: 505/315
• Length 1 [mm]: 505
• Length 2 [mm]: 315
• Fitting Position: Rear Axle
• Manufacturer: TRUCKTEC

• for OE number: 2E0413023AM
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: GSP AMORTYZATOR

• for OE number: 2E0413023AT
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: GSP AMORTYZATOR

• Vehicle type: 30-35, 50
• Suspension: for vehicles with standard suspension
• reinforced version:
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
MB SPRINTER (906) VW CRAFTER 06-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MB SPRINTER (906) VW CRAFTER 06-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Vehicle type: Crafter 28, 35, 32, 30
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 315
• Length 2 [mm]: 505
• Bore Diameter [mm]: 25
• Piston Rod Diameter [mm]: 12.4
• Weight [kg]: 2
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with standard suspension
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

for OE number: 2E0413023AM, 2E0413023AN, 2E0413023AR, 2E0413023NA, 2E3413023

• Suspension: for vehicles without heavy duty suspension
• Drive Type: Rear-Wheel Drive
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

for OE number: 2E0413023AP, 2E0413023AQ, 2E0413023AS, 2E0413023AT, 2E0413023BA, 2E3413023A

• Vehicle type: 30-35
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
MB SPRINTER (906) VW CRAFTER 06-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MB SPRINTER (906) VW CRAFTER 06-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Suspension: for vehicles with comfort suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

for OE number: 2E0 413 023 AM, 2E0 413 023 AN, 2E0 413 023 AR, 2E0 413 023 NA, 2E3 413 023

• Vehicle type: Crafter 28 / 30, Crafter 32 / 35
• Special Purpose Vehicle: not for motor home
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Suspension Strut Outer Diameter [mm]: 39
• Name: AMORT
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Vehicle type: Crafter 46, 50
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 330
• Length 2 [mm]: 520
• Bore Diameter [mm]: 25
• Piston Rod Diameter [mm]: 12.4
• Weight [kg]: 1.824
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Vehicle type: 30-35
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMA0176
• Shock Absorber Mounting Type: Top pin
• for OE number: 2E0413023AM
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• max. length [mm]: 542
• min. length [mm]: 360
• Standpipe Diameter [mm]: 45
• Piston Rod Diameter [mm]: 12
• Name: SN SA95121.12
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Vehicle type: Crafter 28 / 30, Crafter 32 / 35
• Special Purpose Vehicle: not for motor home
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Suspension Strut Outer Diameter [mm]: 45
• Name: AMORT
• Manufacturer: KYB
• Additional information: 349045
• Lisainfo: 349045

General Information: Please refer to the technical drawing in "Documents"

• for OE number: 906 320 7430
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Length 1/Length 2 [mm]: 650/460
• Length 1 [mm]: 650
• Length 2 [mm]: 460
• Piston Rod Diameter [mm]: 28
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Manufacturer: TRUCKTEC

• Vehicle type: Crafter 46 / 50
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

• Vehicle type: 30-35
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0176
• Shock Absorber Mounting Type: Top pin
• for OE number: 2E0413023AM
• Manufacturer: JAPKO

• Fitting Position: Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• max. length [mm]: 439
• Manufacturer: FAST

• Vehicle type: Crafter 32 / 35
• Special Purpose Vehicle: for motor home
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Suspension Strut Outer Diameter [mm]: 45
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Manufacturer: OYODO

• for PR number: 1P4, 1BA, 1P0, 1P5, 1P6, 1P8, 1P3, 1P9, 1UA, 1UV
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAVO PARTS

• Vehicle type: 30-35
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length [mm]: 535
• Length 1 [mm]: 316
• Length 2 [mm]: 500
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN

Lisainfo: "Tootja: BILSTEIN
MB SPRINTER 06-
(kvaliteediklass: Q)"

• Vehicle type: 30-35
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SM0176
• Shock Absorber Mounting Type: Top pin
• for OE number: 2E0413023AM
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Vehicle type: 50
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length [mm]: 546
• Length 1 [mm]: 320
• Length 2 [mm]: 511
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-169163

Lisainfo: "Tootja: BILSTEIN
MERC. SPRINTER 06-
(kvaliteediklass: Q)"

• Vehicle type: 30-35
• reinforced version:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Length [mm]: 532
• Length 1 [mm]: 312
• Length 2 [mm]: 497
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
MERC. SPRINTER 06-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERC. SPRINTER 06-
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SE30/13X185A
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: SACHS
• Name: SHS 314608

SVHC: No information available, please contact the manufacturer!

• Vehicle type: Crafter 46 / 50
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: KYB

Name: AMORTYZATOR VW T. CRAFTER (2E_, 2F_) 46/50 06- LE/PR GAS A JUST

• for PR number: 0JA, 1SA, 1UA, 1UB, 1UC
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 57
• Length 1 [mm]: 570
• Length 2 [mm]: 388
• Piston Rod Diameter [mm]: 28
• Quantity per axle: 1
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• for OE number: 906 320 6230
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Length 1/Length 2 [mm]: 435/260
• Length 1 [mm]: 435
• Length 2 [mm]: 260
• Fitting Position: Front Axle
• Manufacturer: TRUCKTEC

• for PR number: 1BF
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Bore Diameter [mm]: 15
• External Thread Size: M16 x 1,5
• Distance of mounting bores [mm]: 90
• Piston Rod Diameter [mm]: 28
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• min. length [mm]: 255
• Shock Absorber Design: Suspension Strut
• max. length [mm]: 437
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Fitting Position: Front Axle Left, Front Axle Right
• Pipe Diameter [mm]: 58
• Weight [kg]: 4.907
• Observe service information:
• Manufacturer: FEBI-AMORTYZATORY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1SA
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 57
• Length 1 [mm]: 553
• Length 2 [mm]: 368
• Piston Rod Diameter [mm]: 28
• Quantity per axle: 1
• Manufacturer: TRW

for combined PR number: 2MQ + 1SA, 2MQ + 1SB, 2MR + 1SA, 2MR + 1SB, VV8 + 1SB, VV8 + CG5, VV8 + 1BA, VV8 + 1BF, VV0 + 1SA, VV0 + 1SB, VV0 + 1UA, VV0 + 1UB, VV0 + 1UC, VV0 + 1UM, VV0 + 1UU SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt
• Pikkus (mm): 365
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• max. length [mm]: 439
• min. length [mm]: 262
• Standpipe Diameter [mm]: 60
• Piston Rod Diameter [mm]: 25
• Piston Rod Thread: M16X150
• Name: SN SA65143.14
• Manufacturer: NTN-SNR

• Drive Type: Rear-Wheel Drive
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 014 640 0009, 014 641 0005
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY
• Lisainfo: 0266230010
• Additional information: 0266230010

Suspension: for vehicles with standard suspension, for vehicles without heavy duty suspension

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 014 640 0009, 014 641 0005
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles with comfort suspension, for vehicles with lowered suspension, for vehicles with heavy duty suspension

• Fitting Position: Front Axle
• Vehicle type: Crafter 28, 35, 32, 30
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 260
• Length 2 [mm]: 440
• Bore Diameter [mm]: 35
• Piston Rod Diameter [mm]: 28
• Article number of recommended accessories: MK287, PK302
• Weight [kg]: 6.5
• Packaging length [cm]: 62
• Packaging width [cm]: 13.8
• Packaging height [cm]: 13.8
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length [mm]: 390
• Name: AMORT
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE40/28X185A
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

for OE number: 2E0 413 023 AM, 2E0 413 023 AN, 2E0 413 023 AR, 2E0 413 023 NA, 2E3 413 023 SVHC: No information available, please contact the manufacturer!