• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Water pump
• Additional information: Water pump

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

Additional information: KP25649XS-1 GATES Kaks erinevat pingutusviisi vaata videot https://www.youtube.com/watch?v=4cnIAhmcoEs Lisainfo: KP25649XS-1 GATES Kaks erinevat pingutusviisi vaata videot https://www.youtube.com/watch?v=4cnIAhmcoEs

Fabrication Number: CPW-VW-051

• for OE number: 03L 121 011
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• reinforced version:
• Model Year from: 2009
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.68
• Manufacturer: AKSDASIS

• Water Pump Type: for timing belt drive
• Water pump impeller material: Thermoplast
• Supplementary Article/Info 2: with water pump seal ring
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Hammastehulk: 19
• Ventilaatorilabade/labade arv: 8
• Manufacturer: JPN

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 2
• Supplementary Article/Supplementary Info: with holder
• Fabrication Number: CPZ-ME-000

• Vehicle Equipment Line/Variant: TB
• for OE number: 03L121011PX
• Belt Pulley Ø [mm]: 56
• Height 1 [mm]: 28.5
• Weight [kg]: 1.1
• Name: DA DP206
• Manufacturer: DAYCO

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: do not use sealant
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Manufacturer: GRAF

• Weight [kg]: 0.722
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Manufacturer: CONTITECH

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: SW 30 93 6048
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• SVHC: No SVHC present!
• Name: LU 538006010
• Manufacturer: INA
• Lisainfo: 538006010
• Additional information: 538006010

Manufacturer: BGA

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Name: SK VKPC81269
• Manufacturer: SKF

• Voltage [V]: 12
• for OE number: 059121012A
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment Line/Variant: FOR HEATER
• Vehicle Equipment: for vehicles with auxiliary water pump
• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.3
• Always compare old and new part (in particular OE No.):
• Name: CE 22SKV066
• Manufacturer: ESEN SKV

• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.25
• Number of connectors: 3
• Always compare old and new part (in particular OE No.):
• Name: CE 22SKV053
• Manufacturer: ESEN SKV

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Water pump impeller material: Metal
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Number of blades/vanes: 8
• Impeller Diameter [mm]: 64
• Manufacturer: HEPU

• Pulleys: with belt pulley
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 0.71
• Name: VA 506974
• Manufacturer: VALEO

• Voltage [V]: 12
• for OE number: 06D121601
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with holder
• for OE number: 2048350364
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• for OE number: A2118350264
• Connector Shape: D Shape
• Inlet Ø [mm]: 185
• Outlet Ø [mm]: 184
• Material: Plastic
• Operating Mode: Electric
• Plug Type: Male
• Power [W]: 12
• Voltage [V]: 12
• Name: NI 831057
• Manufacturer: NISSENS

• Vehicle Equipment Line/Variant: AUX
• for OE number: 059121012A
• Operating Mode: Electric
• Name: DA DEP1018
• Manufacturer: DAYCO

• Operating Mode: Electric
• Manufacturer: JP GROUP
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Vehicle Equipment: for vehicles with auxiliary water pump
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Pressure [bar]: 0.1
• Flow rate [l/h]: 900
• Protection Type (IP Code): IP6K7
• Supplementary Article/Supplementary Info: without holder
• Manufacturer: BOSCH
• Name: BS 0392023004

• Operating Mode: Electric
• Supplementary Article/Info 2: with clip
• Manufacturer: NRF

• Voltage [V]: 12
• Flow rate [l/h]: 900
• Pressure [bar]: 0.1
• Quality: OE EQUIVALENT
• for OE number: 0392023004
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Operating Mode: Electric
• Weight [kg]: 0.4
• Packaging length [cm]: 14
• Packaging width [cm]: 13
• Packaging height [cm]: 11

• Operating Mode: Electric
• Voltage [V]: 12
• Weight [kg]: 0.3
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 8
• for OE number: 059121012A, 95510631200

• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Operating Mode: Electric
• Manufacturer: GATES

• Voltage [V]: 12
• Number of connectors: 3
• Operating Mode: Electric
• Weight [kg]: 0.21
• for OE number: 059 121 012 A
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rakendustüüp: elektriline
• Pinge [V]: 12
• OE-numbri jaoks: 059 121 012 A
• Manufacturer: HEPU

• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 4
• Manufacturer: BOSCH
• Name: BS 1987946943

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 4
• Number of Teeth: 160
• Manufacturer: SNR
• Name: SN KDP457.720
• Lisainfo: SN KDP457.720
• Additional information: SN KDP457.720

• Engine Code: CSLB
• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: HT -CSLB # CS
• Number of Teeth: 160
• Width [mm]: 25
• Length [mm]: 1,524
• Full Set:
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: DA KTBWP7880
• Manufacturer: DAYCO
• Additional information: KTBWP7880 DAYCO
• Lisainfo: KTBWP7880 DAYCO

• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530055032
• Lisainfo: 530055032
• Additional information: 530055032

• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Observe service information:
• Name: SW 30 94 5116
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Number of tension rollers: 1
• Number of deflection pulleys: 3
• Supplementary Article/Info 2: with bolts/screws
• Supplementary Article/Supplementary Info: with camshaft screws
• Manufacturer: HEPU

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Manufacturer: SKF

• Driven Units: Camshaft
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.622
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Manufacturer: CONTITECH
• Name: CT 1139WP6

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Driven Units: Camshaft, Oil Pump
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Weight [kg]: 2.752
• Width 1 [mm]: 25
• Width 2 [mm]: 9.2
• 2 Belts:
• Number of Teeth 2: 59
• Number of Teeth 1: 160
• Supplementary Article/Supplementary Info: with camshaft screws
• Engine Timing: Timing belt in the oil bath
• Manufacturer: CONTITECH

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Manufacturer: GRAF