Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Material: GRP
(Glass fibre Reinforced Plastic) -
Shape: T Shape
(T Piece) - Cooling Hose: from distributor to auxiliary water pump
- Number of inlets/outlets: 3
-
for pipe diameter [mm]: 20,
32 - Operating Mode: Hydraulic
- General Information: pipe union
- Manufacturer: VIKA
- Operating Mode: Mechanical
- General Information: pipe union
- Manufacturer: VIKA
- Fitting Position: Right Front
- Vehicle Equipment: for vehicles with headlamp cleaning system
-
Fabrication Number: EDS-
VW- 006 -
paired article number: EDS-
VW- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Left Front
- Vehicle Equipment: for vehicles with headlamp cleaning system
-
Fabrication Number: EDS-
VW- 005 -
paired article number: EDS-
VW- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Left Front
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Right Front
- paired article number: 15SKV703
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 15SKV704
- Fitting Position: Left Front
- paired article number: 15SKV704
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
Manufacturer: DELLO AUTOMEGA
- Operating Mode: Electric
- Pump Type: Mono Pump
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Washer pump,
headlight cleaning -
Additional information: Washer pump,
headlight cleaning
- Fitting Position: Right Front
- Manufacturer: DELLO AUTOMEGA
- Pump Type: Mono Pump
- Voltage [V]: 12
- Material: Plastic
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MAX
- Fitting Position: Left
-
Mounting Type: Pre-
assembled -
Supplementary Article/Info 2: with integrated washer fluid jet,
with seal ring -
Wash Nozzle Type: Two-
hole Nozzle -
Housing material: Plastic,
POM (Polyoxymethylene) - Housing Colour: black
- paired article number: 113 439
-
Name: PESUVEEDS,
TULEPESURID - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Right
-
Mounting Type: Pre-
assembled -
Supplementary Article/Info 2: with integrated washer fluid jet,
with seal ring -
Wash Nozzle Type: Two-
hole Nozzle -
Housing material: Plastic,
POM (Polyoxymethylene) - Housing Colour: black
- paired article number: 113 438
-
Name: PESUVEEDS,
TULEPESURID - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Connector Shape: oval
- Pump Type: Mono Pump
- Operating Mode: Electric
- Number of pins: 2
- Rated Voltage [V]: 12
-
for OE number: 3B7 955 681,
1 209 387, 955 624 502 00 -
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Right
- Manufacturer: JP GROUP
-
Lisainfo: Washer Fluid Jet,
headlight cleaning -
Additional information: Washer Fluid Jet,
headlight cleaning
- Fitting Position: Left
- Manufacturer: JP GROUP
-
Lisainfo: Washer Fluid Jet,
headlight cleaning -
Additional information: Washer Fluid Jet,
headlight cleaning
- Fitting Position: Left
-
Wash Nozzle Type: Two-
hole Nozzle - Housing material: Plastic
- Housing Colour: black
-
Supplementary Article/Info 2: with integrated washer fluid jet,
with seal ring -
Name: Pesuveeds,
Tulepesurid - Manufacturer: MAX
- Fitting Position: Right
-
Wash Nozzle Type: Two-
hole Nozzle - Housing material: Plastic
- Housing Colour: black
-
Supplementary Article/Info 2: with seal ring,
with integrated washer fluid jet -
Name: Pesuveeds,
Tulepesurid - Manufacturer: MAX
- Fitting Position: Left
- General Information: headlight spray actuator; left
- Manufacturer: VIKA
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.175
- Vehicle Equipment: for vehicles with headlamp cleaning system
-
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: FEB
- Additional information: F26274
- Lisainfo: F26274
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pump Type: Mono Pump
- Pressure [bar]: 2.5
- Flow rate [l/h]: 432
- Voltage [V]: 12
- Operating Mode: Electric
- Weight [kg]: 0.155
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Operating Mode: Electric
- Pump Type: Mono Pump
- Voltage [V]: 12
- Outlet Ø [mm]: 7
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: MEY
- Lisainfo: 3130670001
- Additional information: 3130670001
- Fitting Position: Left
- paired article number: ZVFP228
- Fitting Position: Right
- paired article number: ZVFP227
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.175
- Vehicle Equipment: for vehicles with headlamp cleaning system
- Manufacturer: SWAG
- Name: SW 32 92 6274
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Voltage [V]: 12
- Weight [kg]: 0.175
- Number of connectors: 2
- Supplementary Article/Info 2: for headlamp cleaning system
- Pump Type: Mono Pump
- Manufacturer: METALCAUCHO
- Operating Mode: Electric
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Fitting Position: Front
- Article number of recommended accessories: 2324118
- Manufacturer: METZGER
- Fitting Position: Left Front
-
Name: Pesuveeds,
Tulepesurid - Manufacturer: MD
- Operating Mode: Electric
- Voltage [V]: 12
- Number of pins: 2
- Pump Type: Mono Pump
- Connector/Clamp: Connector may need adjustment
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Right Front
-
Name: Pesuveeds,
Tulepesurid - Manufacturer: MD
- Voltage [V]: 12
- Operating Mode: Electric
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Quantity: 1
- Weight [g]: 82
- Fitting Position: Left
- General Information: spraying jet; left
- Manufacturer: BORSEHUNG
- Fitting Position: Left Front
- Weight [kg]: 0.072
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Voltage [V]: 12
- Plug Type ID: 3b
- Pump Type: Mono Pump
- Observe the vehicle manufacturer specifications:
- Always compare old and new part (in particular OE No.):
- Manufacturer: VDO
- Fitting Position: Right Front
- Weight [kg]: 0.072
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks