Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) to: 9K-
W- 503258 - Inner Diameter [mm]: 40
- Outer Diameter 1 [mm]: 52
- Outer Diameter 2 [mm]: 58
- Height [mm]: 7.5
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Fitting Position: Rear Axle both sides
- Manufacturer: TOPRAN
- Lisainfo: 103 514 HP
- Additional information: 103 514 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Weight [kg]: 0.039
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 9K-
W- 503259 -
Vehicle Identification Number (VIN) to: 9K-
X- 541900 - Fitting Position: Rear Axle
- Outer Diameter 1 [mm]: 50
- Outer Diameter 2 [mm]: 45
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 19
- Width 1 [mm]: 15
- Width 2 [mm]: 15
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Supplementary Article/Info 2: with wheel hub
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
VW- 000 - Manufacturer: NTY
-
Name: NTY KLP-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 72
- Inner Diameter [mm]: 40
- Width [mm]: 37
-
Lisainfo: Wheel bearing,
front -
Additional information: Wheel bearing,
front
- Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 72
- Inner Diameter [mm]: 40
- Width [mm]: 37
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 72
- Inner Diameter [mm]: 40
- Width [mm]: 37
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Name: Wheel bearing kit
- Quality class: PJ
Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
-
for OE number: 357498625B,
191498625A, 357498625 - Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
-
Vehicle Identification Number (VIN) from: 9K-
W- 503259 -
Vehicle Identification Number (VIN) to: 9K-
X- 541900 - Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter 1 [mm]: 29
- Outer Diameter 1 [mm]: 50.3
- Width 1 [mm]: 14.7
- Inner Diameter 2 [mm]: 19.1
- Outer Diameter 2 [mm]: 45.3
- Width 2 [mm]: 14.7
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Height [mm]: 37
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Quality class: PJ
- Name: Wheel bearing kit
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Net weight [kg]: 0.77
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK
- Fitting Position: Rear Axle
- Number of Holes: 4
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Height [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Weight [kg]: 0.565
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.682
- Supplementary Article/Supplementary Info: with attachment material
- for OE number: 357 498 625 C
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 72
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 72
- Inner Diameter [mm]: 40
- Width [mm]: 37
- Supplementary Article/Supplementary Info: with attachment material
- Full Set:
- Quantity per axle: 2
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Width [mm]: 37
- Fitting Position: Front Axle both sides
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
-
Supplementary Article/Info 2: with retaining ring,
with screw, with nut - Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Fitting Position: Front Axle
- Required quantity: 2
- Parameter: DP2010.10.0096
- Manufacturer: DRIVE
-
Alternative Repair Kit: 100 498 0035,
100 498 0135, 100 598 0235 - Fitting Position: Front Axle
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Height [mm]: 37
- Bearing Type: Ball Bearing
- Name: RATTALAAGER
- Manufacturer: MEY
- Fitting Position: Rear Axle
- Diameter [mm]: 72
- Width [mm]: 37
- Weight [kg]: 0.64
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Weight [g]: 670
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
-
Supplementary Article/Info 2: with retaining ring,
with nut - Manufacturer: OPTIMAL
- Construction Year to: 06.2003
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.551
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Supplementary Article/Info 2: with wheel hub
- Packaging length [cm]: 7.2
- Packaging width [cm]: 7.2
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
-
Fitting Position: Front Axle Left,
Front Axle Right - Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Weight [kg]: 0.839
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 40
- Outer Diameter 1 [mm]: 72
- Weight [kg]: 0.72
- Width 1 [mm]: 37
- Manufacturer: A.B.S.
- Fitting Position: Front
- Weight [kg]: 1.49
- Bolt Hole Circle Ø 1 [mm]: 100
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Front
- Weight [kg]: 1.96
- Bolt Hole Circle Ø 1 [mm]: 100
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Supplementary Article/Info 2: with wheel hub
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: KLT-
SE- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 06.2003
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with attachment material
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Height [mm]: 37
- Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
-
Vehicle Identification Number (VIN) from: 9K-
X- 541 901* - Fitting Position: Rear Axle
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: with attachment material
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Height [mm]: 37
- Full Set:
- Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
-
Vehicle Identification Number (VIN): [;31-
N- 255 989] -
Fitting Position: Right,
Left, Front Axle - Width 1 [mm]: 37
- Inner Diameter 1 [mm]: 40
- Outer Diameter 1 [mm]: 72
- Tightening Torque [Nm]: 265
- Manufacturer: SNR
- Name: SN R154.28
-
Fitting Position: Front Axle Left,
Front Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 72
- Inner Diameter 1 [mm]: 40
- Manufacturer: GSP
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Width [mm]: 37
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
-
Fitting Position: Front Axle Left,
Front Axle Right - Trim Level: FRRE LR+FR
- for OE number: 357498625C
- Number of bores: 40
- Width [mm]: 37
- Diameter 2 [mm]: 1
- Name: DA KWD1037
- Manufacturer: DAYCO
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 120
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Flange Ø [mm]: 119.8
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Vehicle Identification Number (VIN) from: 9K-
X- 541901 - Fitting Position: Rear Axle both sides
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Quantity per axle: 2
- Manufacturer: TOPRAN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 2
- Fitting Position: Front
- General Information: wheel bearing with assembly parts; front
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 9K-
X- 541901 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 4
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub with bearing,
rear -
Additional information: Wheel hub with bearing,
rear
Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring
- Construction Year from: 02.2001
- Fitting Position: Rear
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Braking/Drive Dynamics: for vehicles with ABS
- Weight [kg]: 1.8
- Number of Holes: 4
- Bolt Hole Circle Ø 1 [mm]: 100
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV043
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 4
-
Thread Size: M12X1,
5 - Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Supplementary Article/Info 2: with ABS sensor ring
- Inner Diameter 2 [mm]: 30
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Flange Ø [mm]: 119.8
- Supplementary Article/Info 2: with ABS sensor ring
- Quality class: PJ
- Name: Wheel hub
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 72
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Supplementary Article/Info 2: with ABS sensor ring
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter 1 [mm]: 30
- Outer Diameter 1 [mm]: 120
- Height 1 [mm]: 62
- Rim Hole Number: 4
- Weight [kg]: 1.75
- Number of Teeth, ABS ring: 43
- Manufacturer: A.B.S.
Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring
- Fitting Position: Rear Axle
- Width [mm]: 61.8
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Mounting bores distance [mm]: 100
- Supplementary Article/Info 2: with ABS sensor ring
-
Thread Size: M12x1,
5 - Rim Hole Number: 4
- Number of Teeth, ABS ring: 43
- Net weight [kg]: 1.65
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK
- Fitting Position: Rear Axle
- Required quantity: 2
- Parameter: DP2010.10.0436
- Rim Hole Number: 4
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: DRIVE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 4
-
Thread Size: M12X1,
5 - Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Supplementary Article/Info 2: with ABS sensor ring
- Inner Diameter 2 [mm]: 30
- Version: One
- Manufacturer: GSP
- Quantity: 2
-
Vehicle Identification Number (VIN) from: 9K-
X- 541 901 - Fitting Position: Rear Axle
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Bearing Type: Angular Ball Bearing
- Width [mm]: 64
- Weight [kg]: 1.6
- Required quantity: 2
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- General Information: wheel hub with bearing; rear
- Manufacturer: VIKA
- Rim Hole Number: 4
-
Fitting Position: Rear Axle,
Left, Right - Outer Diameter [mm]: 120
- Inner Diameter [mm]: 30
- Supplementary Article/Info 2: with integrated ABS sensor
- Width [mm]: 62
- Manufacturer: IJS GROUP
-
Fitting Position: Right,
Left, Rear Axle - Number of Holes: 4
- Inner Diameter 1 [mm]: 30
- Supplementary Article/Info 2: with rubber mount
- Width 1 [mm]: 62
- Number of pins: 43
- Outer Diameter 1 [mm]: 120
- Manufacturer: SNR
- Name: SN R182.61
-
Vehicle Identification Number (VIN) from: 9K-
X- 541901 - Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: without attachment material
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth, ABS ring: 43
- Rim Hole Number: 4
- Number of Teeth: 43
- Bearing Type: Ball Bearing
- Name: RATTARUMM
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring
- Width [mm]: 37
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 73
- Bolt Hole Circle Ø [mm]: 100
-
Sealing lip material: NBR
(nitrile butadiene rubber) - Number of Holes: 4
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.543
- Supplementary Article/Supplementary Info: with attachment material
- Manufacturer: FEBI BILSTEIN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Vehicle Identification Number (VIN) from: 9K-
X- 541901 - Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 120
- Inner Diameter [mm]: 30
- Width [mm]: 61.5
- SVHC: No SVHC present!
- Manufacturer: FAG