• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 138
• Width [mm]: 23
• Length [mm]: 1,104
• Number of belts: 1
• Pulleys contained: 1
• Weight [kg]: 0.8
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 23
• Number of Teeth 1: 138
• Manufacturer: SNR
• Name: SN KD457.32

• Length [mm]: 1,070
• Width [mm]: 21.3
• Number of belts: 1
• Weight [kg]: 0.886
• Number of ribs: 6
• Manufacturer: DOLZ
• Name: DO SKD205A

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• Weight [kg]: 1.58
• for article number: KD100/KD156
• Manufacturer: DOLZ
• Name: DO SKD100

• Engine Code: CLCA
• Driven Units: Camshaft
• Manufacturer: BGA

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• Weight [kg]: 2.29
• for article number: A251
• Manufacturer: DOLZ
• Name: DO KD156

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• for article number: KD062
• Manufacturer: DOLZ
• Name: DO SKD062

• Engine Code: CBDC
• Construction Year to: 05.2010
• Number of Teeth: 160
• Length [mm]: 1,524
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 4
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: BOS

• Engine Code: CLCA
• Construction Year from: 05.2010
• Number of Teeth: 160
• Length [mm]: 1,524
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 4
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: BOS

• Driven Units: Camshaft
• Trim Level: HT -CBDC
• for OE number: 03L198119E
• Number of Teeth: 160
• Width [mm]: 30
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 2.2
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY
• Additional information: KTB563 DAYCO
• Lisainfo: KTB563 DAYCO

• Engine Code: CLCA
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA
• Lisainfo: 530055010
• Additional information: 530055010

• Engine Code: CLCA
• Article number of the recommended special tool: VKN 1000
• Belt Width [mm]: 25
• Belt Material: PTFE (polytetrafluoroethylene)
• Colour: black
• Number of Teeth: 160
• Belts: with trapezoidal tooth profile
• Manufacturer: SKF
• Name: SK VKMA01148
• Lisainfo: VKMA 01148 SKF
• Additional information: VKMA 01148 SKF

• Driven Units: Camshaft
• Engine Code: CLCA
• Article number of the recommended special tool: GAT4840A, GAT4844
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Number of belts: 1
• Number of track rollers: 4
• Width 1 [mm]: 30
• Number of Teeth 1: 160
• Manufacturer: SNR

• Driven Units: Camshaft
• Trim Level: HT -CLCA
• for OE number: 03L198119F
• Number of Teeth: 160
• Width [mm]: 25
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 2.4
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Engine Code: CBDC
• Belt Width [mm]: 30
• Belt Material: PTFE (polytetrafluoroethylene)
• Colour: black
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Engine Code: CBDC
• Width [mm]: 30
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 1.805
• Observe service information:
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBDC
• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Driven Units: Camshaft
• Engine Code: CBDC
• Article number of the recommended special tool: GAT4840A, GAT4844
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Engine Code: CLCA
• Number of belts: 1
• Weight [kg]: 2.77
• Name: AI WPK-199201
• Manufacturer: AIRTEX

• Engine Code: CBDC
• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Water Pump Type: for timing belt drive
• Manufacturer: BUGATTI

• Driven Units: Camshaft
• Trim Level: HT -KTBWP
• Number of Teeth: 160
• Width [mm]: 25
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY
• Additional information: KTBWP7880 DAYCO
• Lisainfo: KTBWP7880 DAYCO

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• Weight [kg]: 3.05
• for article number: A251
• Manufacturer: DOLZ
• Name: DO KD062

• Engine Code: CLCA
• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CLCA
• Construction Year from: 05.2010
• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 4
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Driven Units: Camshaft
• Engine Code: CLCA
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.96
• Number of Teeth: 160
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

Technical Information: According to VW AG, date restrictions can deviate., Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Engine Code: CBDC
• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Driven Units: Camshaft
• Engine Code: CBDA, CBDB, CBDC
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 2.17
• Number of Teeth: 160
• Width [mm]: 30
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 4
• Number of Teeth 1: 160
• Manufacturer: SNR
• Name: SN KDP457.730

• Engine Code: CBDC
• Number of belts: 1
• Weight [kg]: 2.96
• Name: AI WPK-199808
• Manufacturer: AIRTEX

• Engine Code: CLCA
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA
• Lisainfo: 530055032
• Additional information: 530055032

• Number of belts: 1
• Number of track rollers: 4
• Width 1 [mm]: 30
• Number of Teeth 1: 160
• Manufacturer: SNR
• Name: SN KDP457.670

• Engine Code: CLCA
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: BUGATTI

• Engine Code: CBDC
• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Driven Units: Camshaft, Oil Pump
• Engine Code: CLCA
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.98
• 2 Belts:
• Width 2 [mm]: 9.2
• Number of Teeth 2: 59
• Width 1 [mm]: 25
• Number of Teeth 1: 160
• Trim Level: BELT IN OIL
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: Hammasrihma komplekt
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Engine Code: CLCA
• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKMC 01148-2 SKF
• Additional information: VKMC 01148-2 SKF

• Engine Code: CBDC
• Water pump impeller material: Metal
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Weight [kg]: 2.56
• Supplementary Article/Supplementary Info: with water pump
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBDC
• Construction Year to: 05.2010
• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Driven Units: Camshaft
• Engine Code: CLCA
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT
• Lisainfo: KP25649XS-1 GAT
• Additional information: KP25649XS-1 GAT

• Driven Units: Camshaft
• Engine Code: CBDC
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT
• Lisainfo: KP15648XS-1 GAT
• Additional information: KP15648XS-1 GAT

• Driven Units: Camshaft
• Trim Level: HT -KTBWP
• Number of Teeth: 160
• Width [mm]: 30
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY

• Driven Units: Camshaft
• Engine Code: CBDA, CBDB, CBDC
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.876
• Width [mm]: 30
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Driven Units: Camshaft
• Model Year from: 2012
• Engine Code: CLCA
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.622
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Driven Units: Camshaft
• Model Year to: 2011
• Engine Code: CLCA
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.719
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: According to VW AG, date restrictions can deviate., Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Engine Code: CLCA
• Model Year from: 2012
• Driven Units: Camshaft, Water Pump
• Width [mm]: 25
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with water pump
• Pulleys contained: 4
• Supplementary Article/Info 2: with fastening material
• Number of belts: 1
• Number of Teeth: 160
• Weight [kg]: 3.383
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• for article number: 570059N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 3.05

• Engine Code: CLCA
• Model Year from: 2012
• Driven Units: Camshaft, Water Pump
• Pulleys contained: 4
• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Operating Mode: Mechanical
• Weight [kg]: 7.159
• Manufacturer: VAICO

Supplementary Article/Supplementary Info: with attachment material, with coolant, with water pump General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.